I keep getting an "SSL has not propagated yet" message on secure websites

On any secure website, I get a message in Firefox warning "SSL has not propagated yet." Nothing seems to be affected, I can still access the sites (this one for example), but the message keeps popping up.
This all started this morning when 11.0 was installed, I went back to 10.0 but that did not resolve the problem.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
S
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Similar Messages

  • Since installing OS 10.8 keep getting "This disk was not ejected properly" messages. Why?

    Since I installed Mountain Lion (OS 10.8) on my Mac Book Pro (early 2011), I keep getting "This disk was not ejected properly" messages. No yet sure what I do preceeding this occurence. Anyone else have this problem?

    I am one of those who had experienced this kind of problem.  My former Time Machine disk used to automatically eject itself when my iMac sleeps, hence upon waking up my iMac. i always get the error message that the disk was not properly ejected.
    From what I was able to gather from my experience, until the time that I found a workable solution, I think I can say that the problem is most probably caused by the incompatibility of certain external drives with how the iMac operates when on sleep and upon waking up.  Some external drives are just not able to cope with how the iMac tries to remount a connected disk after it wakes up from sleep.  There are just some external drives that cannot continue to be mounted after the iMac wakes from sleep.  There are just some external drives that are not responsive enough. In other words, the existence of the problem lies with the type of external drive you are using.
    My former Time Machine disk, the problematic one, was an Imation M300 Apollo 1 TB external disk.  It unmounts everytime my iMac went to sleep, but does not remount after waking up the iMac.  The disk will continue to be unmounted until I physically remove its USB connector and replug it in the iMac.
    I replaced my former Time Machine disk with my current one, a Transcend Storejet 1 TB.  And the problem went away.  The Transcend disk continue to be mounted after the iMac is woken up even from the longest of sleep.  I have even the energy saving option "put the hard disk to sleep..." checked.  The Transcend disk comes with a Y cable, i.e. it has two USB connectors, but I only connect the one for both data and power--and it still remains mounted even after waking the iMac from sleep.
    The sad realization, however, is that since there are only some external drives that are not able to work with the iMac, no matter how many those some may seem to be, it will be highly unlikely for Apple to itself fix this kind of a problem.
    I, therefore, make the following recommendations:
    1.  Check first if your problematic disk has a firmware upgrade available.  In some cases, the firmware upgrade may be enough to make the disk more responsive to the iMac waking up.
    2.  If there is no firmware upgrade available, check if your power/data USB cable is properly working.
    3.  If your power/data USB cable is in order, and the problem still persists, I think it is inevitable that you have to replace the problematic disk with a newer one that could respond well with the iMac's wake/sleep operation.  With what disk will you replace your problematic one?  I can only recommend from my personal experience the Transcend disk I mentioned earlier.  You may also search this forum on other brands of disks that may also work.
    Regards.

  • Getting "The Document has not been opened" message on one environment

    Hey, before I begin, here is some basic information that the sticky asked me to provide...
    Version of Crystal Reports or BOE used in your development project = Business Objects Enterprise XI 3.1. Specifically, the CrystalReportViewer that we are using is in CrystalDecisions.Web 12.0.1100.0
    The development language and the version of the development language = C# .NET 3.5 using ASP .NET
    The database you are connecting to = Microsoft SQL 2008 Database
    The database connection type (OLE DB, ODBC, etc.). = OLE DB
    Does the application work on your development computer? Yes, it works on all our environments (DEV, QA, Acceptance (a further level of QA) except for the newest pre-prod install that was done.
    Okay, so we have a web application that involves running of crystal reports, which works great in most environments. Essentially a user chooses a report to run, configures their criteria and clicks generate then a non-modal popup window is opened with the CrystalReportViewer in it that actually displays the report to the user. We've recently deployed this app to our pre-production environment for final user-testing before it goes to full production.
    However, what's happening is when the crystalreportviewer pop up appears, it just merely displays in simple text "The document has not been opened". If I hit refresh on the popup then the report actually does generate, but only after clicking refresh...which is a behavor not experienced anywhere else.
    Any help on this would be greatly appreciated (the only thing I found through googling is that that error can be generated if the server does not have the Microsoft C++ Redistributable package installed...our server has this, identically to all our other working servers)

    Hi Scott,
    Use ProcessMonitor from Microsoft and look in the logs to see if there are any Access Denied errors. Also look in the IIS logs and Event viewer to see if anything there is being logged.
    Anti-virus software logs is another place to look....
    Pop up blocker in the Browser maybe or possibly adding the new server name to the trusted list.... Domain permissions possibly...
    If you browse the App from the Server does that work?
    Don

  • I keep getting the FIrefox has stopped working error message, i don't have firefox installed, i have installed then removed firefox but it persists.

    I do not use firefox, i have installed, and then uninstalled firefoxx to resolve this issue, removing all settings, i have cleared all browsing data from all browsers, the error messages are BEX. Its almost as if it keeps trying to install itself and failing.

    Screenshot.

  • I keep getting the itunes has stopped working error message and the program keeps closing itself everytime I atry to access the store

    Every time that I attempt to open the store in my iTunes program, I receive and error message and it states ITunes has stopped working and needs to close the program. How do I fix this?

    Restart your computer then try iTunes.

  • Trying to purchase through a App Game but keep getting "Your Purchase Could Not Be Completed" message . How come?

    I have tried using multiple cards but still get the same error. Some help or explanation would help a lot please and thanks!

    Is it telling you to contact iTunes Support? If so, that is what you will have to do.

  • I have tried to download an audiobook that has Two parts.  The second part of the book downloaded.  But the First point did not.  I keep getting "Part 1 could not download at this time".  How can I get it to download?

    I have tried to download an audiobook that contains Two Parts.  The second part was successful in downloading.  However, the first part was not.  I keep getting "Part 1 could not download at this time".  I should have enough space for the download.  Any suggestions of what I can do?

    Answered in the other thread you posted in:
    i am trying to download new software and my mac keeps asking for the administrator name and password... i enter my apple…
    Please don't post in more than one place. It can lead to people wasting their time answering a question which has already been answered elsewhere.

  • Trying to open the download for CS6 but I keep getting a "problem has occurred" message and an error code.

    I have downloaded both the 4.5G Adobe Creative Suite 6 package and the 1MB .exe unloader but when I try to open them I keep getting a "problem has occurred while extracting some files," message. That is followed by a "problem has occurred while extracting the archive" message. The error code received is "Exception EAccessViolation in module DesignWebPremium_CS6_LS16(1).exe at 0001B836" This is followed a series of addresses. The extractor will not work when running as administrator either. I do not know what to do.  I am using a Windows 8.1 PC, any help?

    Hi otterbell
    Download the setup from below location and use it to install the products..
    http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Use the Important instructions on the page to start your download, Use your Serial key to activate them.
    ~Mandy

  • I keep getting " The song**** could not be used because the original file c

    Ok, I'll try not to get my problem too confusing or complicated. Had a virus and had pc repair store wipe and reload my operating system. They backed everything up and put it in a folder on my desktop. I reinstalled i-tunes. Opened i-tunes. checked my library. Everything is there but duplicated. I manually dumped all duplicates.(That was fun!) I try to play songs. I keep getting " The song** could not be used because the original file could not be found. Would you like to locate it?"
    I locate my i-tunes files in C drive, docs/settings, my docs, i-Tunes, i-Tunes music. I see an icon showing MPEG4 with a musical note and little "lock" symbol in the corner. I double click that icon and i-Tunes opens up and the songs starts playing. If I shut my pc down and restart it, go to i-tunes find that song and click it it always plays now. Okay that's one song fixed. Also if I find the icon in C drive again the little lock symbol is gone. Now down to the meat of my question; am I going to have to do this individually with all 2700 songs? Please tell me a faster way.
    Thank you

    If you know where all songs are located on the computer, I'd suggest just removing everything from iTunes and then adding it back in.
    Edit > Select All
    Edit > Delete
    *Choose the option to Remove from library
    *If prompted to move to recycle bin, choose Keep File
    Then click File > Add Folder to Library and navigate to the folder on your hard drive that has your music in it. You can choose your iTunes Music folder, for example, and this will incorporate any subfolders you have stored in there.
    The lock icon suggests that the file is "protected," so most likely purchased from the iTunes store.
    CG

  • I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

    I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
    tt2

  • Using Adobe Captivate 7 and keep getting Adobe Captivate has stopped working...

    I am new to Using Adobe Captivate 7 and keep getting Adobe Captivate has stopped working on Slide 7.  What can I try?

    Will you be delivering this content from an LMS?  If so, then the LMS should handle the menu.  Break your project into separate modules and use the Multi-SCORM Packager to create a bundled set.
    If you are not using an LMS, but ARE serving content from a web server, then YES you could create a menu module that you use to launch the other modules.
    If you are intending to serve this content from a LAN or CD ROM, then you could create a normal HTML web page with hyperlinks to launch individual modules.

  • Can't send email, keep getting ''a copy has been placed in your outbox. no password provided

    can't send email, keep getting '' a copy has been placed in your outbox. no password provided.
    please go to Mail account settings and enter a password" but i did !

    You have not stated who your email account is with. Go to their website, see if they have FAQ's or a forum and check if there is an existing post featuring the same problem. Keep us informed.

  • I'm trying to get into game center to download some things. Enter user id/password then keep getting a "you are not part of this/the administrator group" then a cancel or retry command. What do I do? (I am using a friends wi-fi) What d

    I am trying to get into the Game Center and download some apps. I enter my user id/password the keep getting a "you are not part of the/this administrators group" message then a cancel/retry command. What do I do to become part of this/the administrators group? I am using a friend's wi-fi...Help!

    I am trying to get into the Game Center and download some apps. I enter my user id/password the keep getting a "you are not part of the/this administrators group" message then a cancel/retry command. What do I do to become part of this/the administrators group? I am using a friend's wi-fi...Help!

  • Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

  • Why do I keep getting, this mp4 "was not copied to your ipod because it cannot be played on this ipod"?

    Why do I keep getting, this mp4 "was not copied to your ipod because it cannot be played on this ipod"?

    See:
    iTunes: Frequently asked questions about viewing and syncing videos
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod

Maybe you are looking for