I keep getting an "untrusted connection" warning for nearly every url including my banks and have to go through the "confirm exception" etc steps. How can I keep having to go through this?????
I keep getting the untrusted connection warning and have to go thru all these freaking steps to get access and it happens OVER and OVER again for the EXACT same sites. One example is below citibank.com. MY BANK. EVERY TIME.
== URL of affected sites ==
http://www.citibank.com
Hi there, I was getting the same type problems whenever connecting to a secure site. The problem was caused by my PC's clock. I had manually set the date back a few years to test an app that I was developing. As soon as I corrected the time, all connections were OK again.
Similar Messages
-
when trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL
Have you tried using a WEP password for your wireless network instead of a WPA one? That fixed it for me.
-
I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?
There are a number of resources. You might want to start with:
The User Manual:
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
This Thread:
https://discussions.apple.com/message/22833760#22833760
or just do a google search, that should bring up plenty of tutorials from around the web.
Cheers! -
i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?
korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced. -
We have a newish apple mac and this morning all our files have vanished - all photo's, vidoes, music etc. How can we get it back? Thanks
First of all, look in the garbage. It's easy to move a folder there without knowing it.
Second, do a Spotlight Search (Cmd-Space), and search for a file you know should be there. If you find the file, there's a good chance that the other files you're looking for are there, too.
If you're in kind of a crisis mode, coming up with pat advice probably isn't a good policy - but I suggest investing in a backup drive in case anything goes wrong. A program like Time Machine can be a life saver.
Post with your results! -
I have tried to download 2 movies onto my iPad but I keep getting a download error message. What do I do now? I have already tried turning the iPad off and on again…still nothing.
Try closing iTunes and reset your iPad. After the iPad starts up, try the download again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the iTunes app then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I am trying to authorise my new macbook air for i-tunes and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer
Always remember to 'de-authorize' you computer when selling or sending for service. If sending for repairs you might not get the same mother board or HD back and some how this counts as an authorized computer against your count.
MJ -
We are looking for music hits according to various decades. iTunes used to have a hits of the 30s -90s etc. I can no longer find it. Any hints people?
Also, what are the legalities about sharing music? At what point does a song become part of the public domain?
Thank you! GershawnAlli hello,
Quit iTunes...
Download Cocktail and start the program... click on the 'interface' Icon and tick 'Show Invisible Items' then click the Restart button...
In a finder window click on the Icon that is your Boot Volume in the Side Bar ... select users ... select shared folder ... select the folder named 'SC info' and put it in the trash and empty it ... Do Not touch any other file.
Pathway looks like this HD > users > shared > SC info > SC Info.sidb
Go back to the Cocktail 'interface' window and untick Show Invisible Items and click restart .. quit Cocktail.
Start iTunes after deletinng this folder and it will prompt you to enter your authorization information again ... see now if your problem still exists...
Let's know how you get on Alli ... take care ... TP -
Hello , I have a shot with two lips kissing each other , how can I keep
Hello , I have a shot with two lips kissing each other , how can I keep the lips red and turn the rest of the face into black ? I tried shaping but the result was negative because the shape was moving all teh time , I tried color correction but the face and lips`s color was similar so I couldn`t do it with that , is there any other way ? Thanks so much
You're gonna have fun with this because the HSL qualifiers probably won't see much separation between the areas that you want to isolate. You could try combinations of turning off Hue, Saturation, or Luminance. See what you get.
Otherwise you're into a roto. (Manually tracked and animated User Shape)
jPo
Message was edited by: JP Owens -
I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?
The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD -
I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?
As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country). -
i lost my iphone and now icloud dosent download the photos !!! how can i get my photos in another way ??
You will need to get another phone to restore from you icloud backup http://support.apple.com/kb/HT4859
FAQ photo stream http://support.apple.com/kb/HT4486 -
I downloaded an album and on one of the songs it skips to the next song half way through the song... How can I fix this?
Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer. -
I have used a website for years, now I get an untrusted connection warning. How do I progress?
Using FF 9.0.1
www.corp.delaware.gov gets me a "Connection Untrusted" note. Error code : ssl_error_cert_domain. Never happened before. Just used my wives desktop and it went through normally.Rename the file cert8.db to cert8.db.old in the Firefox Profile Folder to remove all intermediate certificates that Firefox has stored by visiting secure websites.<br />
If that helped to solve the problem then you can remove the renamed file cert8.db.old unless you have user certificates that you may want to export first and import them in the new file.<br />
Otherwise you can restore the certificates by renaming (copying) the file back to cert8.db<br />
Firefox will automatically store new intermediate certificates when you visit websites that send them.<br /> -
For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black. I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots. I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit. Any suggestions of where to start to solve this issue?
Thanks!These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
Maybe you are looking for
-
[SOLVED]GPG no longer supports --no-use-standard-socket?
I've used an SD card for where I store my gnupghome for a long time. I have delegated subkeys and all the configuration for them there. It's mounted to /mnt/keys on vfat. These cards use a FAT file system as I use these keys on multiple operating sys
-
Ipod 4g goes black out while playing games
i dont know whether you guys have experinced this but my ipod 4g goes black out while playing some games. its like when im playing games half way, the ipood will auto close the app that im playing. Does this means that my ipod is having problem? Btw
-
I'm new to Java and am self teaching myself. I have run into a problem that I can't figure out. I have the following code that works fine, however, when I add the package keyword the program does not compile and gives errors. The following code works
-
Is it possible to Delete all Records of Std. SAP tables for Quality Server
Hi, We want to delete some sensetive information from Test(Quality) Server. For Std. SAP tables, is it possible to delete all Records?
-
Create the second copy, delete and the first copy serial (Archive Deletion)
Hi Experts, I am new to DB2 and i want to enable "-cds" Option (Create the second copy, delete and the first copy serial) while performing online backups. Though this option is available in "Oracle" and we can schedule the same in DB13 itself. If you