I keep getting error codes when attempting to publish using FTP...

"The operation cannot be completed because one or more required items cannot be found. (Error code -43)." That pops up before I can enter my FTP password.
The other one is not popping up right now, but when I finally was able to enter my FTP password, another error code pops up. It was -36. Can't remember the words.
Please help me. I NEED(ed) to publish this website yesterday! Thank you!

I got it to come up! The other error code says "The Finder cannot complete the operation because some data in "ftp://[email protected]" could not be read or written. (Error code -36)"
This is the on that pops up only after I enter the (correct) FTP password.

Similar Messages

  • Keep getting error message when attempting to buy a song (Error 5002)

    This error message seems to pop up with just this one song (says there is an issue with the iTunes store and that it is an unknown error) and it has not changed this status for a month now. I have the latest iTunes and there were no problems in updating/getting other songs from the store.
    So what's up?
    Thanks,
    MH

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

  • Keep getting error message when trying to publish imovie '08

    I keep getting the error code -34 when trying to publish a medium size movie to itunes. Any ideas on what to do now?
    thanks,

    That error usually means "Disk Full". Could that be the issue?

  • I keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

    i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I keep getting error code u44m1p34 when I try to update CC2014.  I've tried uninstalling several times completely to no avail.  Any ideas?  It's really bugging me now!

    I keep getting error code u44m1p34 when I try to update CC2014.  I've tried uninstalling several times completely to no avail.  Any ideas?  It's really bugging me now!

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • I keep getting error code 54 when synching iphone 5, how do i fix?

    i keep getting error code 54 when synching iphone 5, how do i fix?

    Hi papabear74,
    Try using the steps in the following article to help you troubleshoot this issue:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • HT1918 why do I keep getting error code 5002 when trying to make a purchase? Has been almost a week now!

      Why do I keep getting Error Code 5002 when trying to make a purchase from the Itunes store? I am using Vista Home edition> havent had any problems before. This has been going on for a week.

    This alert is often the result of an issue with verifying your billing.
    Quit iTunes.
    Open iTunes.
    Test the issue.
    If it persists, sign in to store.apple.com using your iTunes account
    Click on Change account information
    Modify or remove your credit card information.
    Click Continue.
    Test the issue.

  • I keep getting error code 3131 when trying to publish a ping playlist -- help!!!

    I keep getting error code 3131 when trying to publish a ping playlist -- help!!!

    Same problem. I make playlists on Ping so the listeners of my podcast can easily download the songs I talk about. But for **** near 2 weeks now I can't edit a playlist or add a new one. When are they gonna fix this?

  • Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

    Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

    wmv is a Windows Media format.  I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
    You need
    Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
    After installation a new Flip4Mac pane will appear in System Preferences.  Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
    or play the files with VLC
    VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
    While you're at it you might install:
    Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
    Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
    Perian doen't do WMV but it's handy to get many things to play in Quicktime.
    Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

  • Why do I keep getting error 150210 when I attempt to download Adobe Reader XI

    Why do I keep getting error 150210 when I attempt to download Adobe Reader XI?

    Download and run the Offline installer from here: http://get.adobe.com/reader/enterprise/

  • I keep getting Error Code 4002 in iTunes when I try to update my iTunes Match.  I have turned off iTunes Match, then reinstalled it, but that does not seem to work.  I also get another Error Code (4010) sometimes.  Can someone offer advice?

    I keep getting Error Code 4002 in iTuens when  try to update my iTunes Match.  I have turned off Match, then reconnected, but the code keeps coming.  So does Error Code 4010 at times.  Can someone help?

    iTunes store, App Store, iTunes Match and various other services have been down for the past several hours. Apple's System Status page at http://www.apple.com/support/systemstatus/ now shows them back up but they are STILL NOT up for me or many other users. The error codes 4000 series refer to connection errors, I've gotten several from 4001-4010 all day. We're kind of at the mercy of Apple at this point. It would be nice if they would give us some notification about their problems since we are paying for their service.

  • My iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore

    my iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore

    Hey p0507!
    Here is an article that addresses your error message, and can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

    When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

    FRANK M
    What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
    As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
    Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
    Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
    For the 9.0.1 Update
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
    Camera Raw (last update possible for 9) is 6.5
    Camera Raw-compatible Adobe applications
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
    Please review and consider the above, and then let us know the outcome.
    Thank you.
    ATR

  • I keep getting error code 1450 when I try to download a music video.

    I keep getting error code 1450 when I try to download a music video. I've since downloaded other songs/videos, and I have the latest version of iTunes, so I don't think I need to uninstall itunes, but I can't download the video I bought.

    If you recently installed or updated disc burning software it may be conflicting with iTunes.
    Try taking a look at this Apple doc, some of the suggestions may take care of the problem -> iTunes for Windows: Troubleshooting CD issues caused by device filters

  • I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

    I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

    Www.Onereceipt.Com<http://Www.Onereceipt.Com>
    Sent from my iPhone

Maybe you are looking for

  • Help is not working on my imac

    I have upgraded to Mavericks and for some reason the help menu no longer works. How do I get it back?

  • MB_CREATE_GOODS_MOVEMENT returning EMKPF-SUBRC = 5

    Hi Guys, Need help............!!!!!!!!!!!!!!!!!!!!!!!!!! We are unable to delete the service entry sheet(SES) due to error message "Deficit of PU GR quantity 13 ACT" in ML81 tcode. We found that the "Quantity Received" field under quantity tab is not

  • Why is member count 100 for all users sccm collection

    hello, I have SCCM 2012 SP1 -4, and have enabled user discovery but "all users" collection does not goes above 100 member count. I do have more 1500 users in AD, all related setting are at default. Disable \enabling was no help,  no component shows w

  • SQL Server 2000 to Oracle 8i

    Hi all, I hope someone will have an answer to my question. I am in the process of migrating our database which is in SQL Server 2000 to Oracle 8i. I have captured the SQL Server Source model [which took all night]. I haven't yet created the oracle mo

  • Component Monitor - Item not found /runtime

    Dear all, When i try to open the component monitor via System Administration -> System configuration -> Knowledge management, i get the following error: Item not found /runtime The item you are trying to access is not available. Try to check.... This