I keep getting error msg -42408 I have tried everything from Roy B and still get ther msg. Any other ideas?
I keep getting error message -42408 when I try to open ITunes Store.I sent a email to support and they sent me a link from Roy B,I tried both of his sugegstions and neither worked.Anyone have any other ideas????
Did you get anywhere with this, ikeaheerlen?
I am having the same sort problem (although my keyboard is recognized so I'm much further along than you).
I had a MacBook Pro with an XP SP3 partition and a Windows 7 partition on it.
I switched to a Mac Pro and wanted to migrate them over to it.
I used WinClone to make backups of both partitions and transferred the WinClone images to the Mac Pro.
I manually created the partitions and restored the WinClone images into each one.
But VMware wouldn't recognize either one.
So I deleted them both, and let Boot Camp Assistant (re-)create a single Boot Camp partition. Then I restored the Windows 7 WinClone image into it.
Ever since then all I get is "BOOTMGR is missing" error.
I thought maybe since I had dual-boot working (with a boot manager) in the old MacBook Pro setup, that the boot manager must've lived on the Windows XP SP3 partition, and it's completely missing from the Windows 7 partition. So I figured I needed to recreate it somehow.
After using the Windows 7 DVD ISO disc image to boot from, and trying several automated/manual steps, I can now actually get VMware to recognize the Boot Camp partition as being one, but when it tries to set it up for use with VMware, it complains that it isn't ready because it must have shut down incorrectly. It says to boot into Windows, then do a clean shutdown. But when I select the Boot Camp partition from Startup Disk, it boots from it but I still get the "BOOTMGR is missing" error even in a 'native' Boot Camp boot
I've tried all the steps I can find (including manual "bcdedit" steps booted from the Windows 7 DVD disc image) to no avail. I don't know what else to try at this point ...
Similar Messages
-
I have tried everything on your articles and still it will not let me save bookmarks.
I have tried upgrading and downgrading firefox and i have tried everything in the articles and still the browser does not let me save any bookmarks.
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
I just tried to update my iphone 4 to the 5.01. It said that my phone backed up and started update. i went on a run and came back and my phone is now stuck in recovery mode. It keeps saying that there is an unknown error, 1. I have tried everything on the troubleshooting list and cannot figure out what is wrong! Please HELP!!!
http://support.apple.com/kb/TS3694#error1
-
What steps do I take next. I have tried everything is this article.
Interesting ...
Your posting title mentions iPhone, but you seem to be talking about iPad.
Also, the article you attached references Macs ...
Anyway, here's a guide to setting up email for iPad:
http://www.apple.com/support/ipad/assistant/mail/ -
My i-phone stopped receiving e-mail on a regular basis. Rather, it will sit and spin trying to load and then stop. Usually, sometime in the night, it will all of a sudden load all of my mail, but then will not load new mail again. I have updated and reset the phone and network, and the problem remains the same. Does anyone know a fix for this issue?
Try deleting the account, restarting your phone and then reinputting the account.
-
I have just updated to the Firefox 4 Beta and from having no problems at all with the previous version I can now no longer scroll. I have reloaded my touch pad drivers and also been onto "about:config" and altered various things suggested by 'firefox help' and still no luck. The scroll button on the touch pad does still work as I can still scroll in Thunderbird and any of the other programs that I use, just not with Firefox any longer. Any suggestions would be gratefully received. Many thanks.
Since today the scrolling started to work for me. Was there a fix auto installed? I havent updated anything that I know about.
I might have uninstall an old Java JRE, don't remember when I did it, could that have done it? -
Security question keep saying they are wrong and I know they are right. I can't change them cuz when I try it tells me to answer the questions. I have tried everything changing my account and all and still can't get it can some one please help me out.
Go here and select "Reset your password." You will receive an email message with a link that bypasses the questions. You will then be able to select and answer the questions again.
-
I keep getting the message "the registry settings for importing and exporting and burning cds are missing. Please reinstall itunes. This may be the result of other cd burining software on your computer" I do not have another CD burning software on my computer and have reinstalled itunes about 30 times and still get the same message and am not able to burn CDs. All of my drivers and firmware are up to date. Please help
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
everytime i try to open creative cloud installer i get a error code 22 i have tried turning off my firewall and no success. what is the best way forward?
is that the case-sensitive drive error? Error "Case-sensitive drives not supported" or similar install error | Mac OS
-
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.
I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go. -
Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?
Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H. -
I have tried all of the suggestions and still keeps asking me to authorize my computer for only a few songs that I have purchased.... HELP???!!!
Delete and redownload them if doing so is free in your country.
(69918) -
I have tried EVERYTHING!! I can't get Adobe Air downloaded!!
I have tried EVERYTHING!! I can't get Adobe Air downloaded!!
Bill,
I know your case well. It comes with the Antec SL350, which has enough power for your system.
I would try different RAM just to see if you have a bad stick.
Take Care,
Richard -
HT201412 I have tried all of the above and still can't get my ipad to respond
I have tried all of the above and still can't get my ipad to respond
Everything? Did you see the very last part about restoring the iPad and did you notice that there is another link in that step in case you cannot restore the iPad?
Symptoms
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of the symptoms listed below.
Resolution
If any of these symptoms occurs, follow the steps in this article to resolve the issue. The device:
Does not return to the Home screen after pressing the Home button
Does not wake from sleep after pressing the Sleep/Wake button
Does not turn on (or power on) when pressing any button
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
If a single application is not responding or freezes when it opens, you can force it to close
Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
Instead of dragging the red slider, press and hold the Home button for six seconds.
If the device does not return to the Home screen, see the steps below to restart.
If the device is unresponsive or certain controls aren't working as expected, try restarting
To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off the device.
To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
If the device remains unresponsive or does not turn on (or power on), try resetting
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If there is no video, verify that the device has enough charge to turn on
If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane.
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Additional Information
Ensuring that your iOS device is kept updated to the latest software should minimize the occurrence of these issues.
Maybe you are looking for
-
How do I get rid of deleted emails from my work email account on my Air?
How do I get rid of deleted emails from my work email account set up on my Air. Keep getting error message "An error occurred while moving messages to mailbox "Trash - On My Mac" They go away from deleted account folder when I hit "trash button" but
-
Dynamic class loading issue with XmlBeans and Axis2
Hi, Since support to web services is not enough in JDeveloper I am using apache axis2 to consume web services from an ADF web application. Everything works fine if I use jdk 1.5 but our app servers require jdk 1.4.2_08-b03 so I switched jre settings
-
I cannot connect to an existing network
I'd like to use AE to connect wirelessly to a USB printer. I've followed all of the instructions to set-up AE to the letter. I get a connection to the Airport Base Station. The light on the AE goes to solid green for about 4 seconds and then it start
-
Command requires GPIB Controller to be Controller in Charge on dequeue element
I have some funky stuff going on in the attached VI. What the VI does is simply to log data to a text file. It is built up as a state machine. This VI's Create state is called from a mainVI (with the help of named queues). I get more than one error a
-
Where will it ship to when pre-ordering my house or nearest Verizon Wireless Store?
Where will it ship when pre-ordered? Does this depend if you order through Apple or if you order through your carrier like Verizon or AT&T?