I keep getting errors when trying to download Acrobat Pro.

Can someone help?

What is the error message that you receive?
Have you tried using a different web browser?

Similar Messages

I keep getting nsinternalinconsistencyexception when trying to download maverick osx 10.9

I keep getting nsinternalinconsistencyexception when trying to download maverick osx 10.9

What is the error message that you receive?
Have you tried using a different web browser?

When trying to download Acrobat Pro XI Student I only get this " http error: 404/support/downloads/dlm/main.jsp " warning.

Hi!
When trying to download Acrobat Pro XI Student I only get this " http error: 404/support/downloads/dlm/main.jsp " warning. This happens with Akamai and the altervative method too. I've paid it, is this because Adobe hasn't progressed my payment yet?
Kind regards, xpooler.

Luckily the problem seems to have vanished. I am not sure what happened but I think the reason was one of the browser extensions, thanks for the advice anyway!

Keep getting "web get error" when trying to download Adobe Acrobat Pro.

Using Windows 8.1 and am trying to download Adobe Acrobat Pro. Error message noted about...tried both IE and Chrome.

We're Sorry
This content requires Adobe Flash Player, which is not supported by your
device. This content can be viewed on a desktop computer or on mobile
devices that support Flash Player.
Copyright © 2014 Adobe Systems Incorporated. All rights reserved
<http://www.adobe.com/go/gftray_all_rights_reserved>.

Getting error when trying to download update for flash player with OSX 10.91

Trying everything to download update for Adobe Flash Player. This is maddening. I have tried uninstalling previous player and re-installing and checked my preferences. Can any one give me some instructions that are easy to understand. I keep getting an error when installing.

There usually is an Adobe flash uninstaller that goes through a process satisfactorily.
Did you get the Adobe Flash update from their
page, directly? http://get.adobe.com/flashplayer/
Also note the extensive info at Adobe link below.
If you are having trouble, or Safari is involved, if
you use a different browser, such as Firefox, etc to
get that version Flash update. There's another thing to
look into, in Mavericks, that older OS X didn't
have, that may affect installation...
In System Preferences, find a Flash Player preference
under "Other." Click on the Advanced tab and then "Check
Now" in the Updates section. An available new one
would be installed. There is a similar issue/answer
in the following solved ASC discussion thread:
https://discussions.apple.com/message/21189654#21189654
•Adobe Flash Player - Installation Problems - Mac OS X:
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.ht ml
Hopefully this helps.
Good luck & happy computing!

Keep getting error when trying to instal Mavericks at the stage when computer is supposed to restart?

Have tried to instal mavericks on a 2011 mac mini serveral times and keep getting a error when it gets to the reboot stage. Help needed thanks!

Have you tried un-installing, then going to Apple Downloads (http://support.apple.com/downloads/) for download /installation of QT 7.6.2?
Also - it wouldn't hurt to repair permissions before & after installation.

I keep getting error messages trying to download Microsoft Office 2013 ProPlus HUP

I am getting so frustrated. I have been trying to download this software for over a month. I'm not sure what else to do. I got a download link after I purchased the software through the HUP program. When I click it I get an error message that says "We're
sorry. We had a problem installing your Office program(s). Is your internet connection working? Do you have enough space on your main hard drive? Please try installing again after you have checked the above".
My internet connection is fine. I have tons of space on my hard drive. I have removed all trial versions of Office that came with the computer. I went into 'regedit' and deleted the office registry.
I even purchased the backup disc and tried that and get an error saying something like it couldn't 'mount' or something like that. I had a Microsoft tech who remoted into my computer and was trying to download it for me for over an hour and even they
gave up.
Anyone else having this issue and is there any suggestion on how to fix?
FYI, I'm using a Dell Inspiron laptop and have Windows 8.1 (recently upgraded from Windows 8). Would appreciate any help!

Hi,
Try the following steps:
1. Check windows updates.
2. Try the Microsoft Fix it in this kb to remove previous install completely:
http://support.microsoft.com/kb/2739501/en-us
3. Reboot.
4. Try installing again.
This seems helpful on the issue.
As always, thank you for your suggestion, Don:)
Regards,
Melon Chen
TechNet Community Support

Getting error when trying to download deployed software package

Hello all, I have been struggling with this for almost two weeks and am about to give up. The error I'm getting is when a client tries to download a deployed software package. The software shows up in IE browser (servername\cmapplicationcatalog),
but when I click install it errors out saying can't install or request software. I am not a network guru and did not setup SCCM but need a little (maybe a lot) guidance. I have looked at log files till my eyes are ready to fall out but just not
sure what I am looking for.
In ccmmessaging.log, I see this error "No reply message from Server. Server may be temporarily down or a transient network error" and this after "http://servername/ccm_system/request failed
with 0x8000000a"
Here comes the weird part, I had this working, successfully deployed twice to two clients. The next day I came in to work and it was broke. I have no clue what could have changed over night to cause
this issue. If someone could maybe lend a hand troubleshooting, I would be most grateful.
Many thanks in advance!!
Rob

Hi,
Please review the link below, here is a useful article for you.
Tips and Tricks for Deploying the Application Catalog in System Center 2012 Configuration Manager
http://blogs.technet.com/b/configmgrteam/archive/2012/07/05/tips-and-tricks-for-deploying-the-application-catalog-in-system-center-2012-configuration-manager.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT4623 I keep getting error when trying to update to version 7.1

I'm trying to update but it keeps getting an error

Me too- been trying for >1hr and If get a "software Update Failed" and "an error occurred downloading IOS 7.1."
I'm still on version 6.1.4. Can't believe the servers are still that swamped...

Keep getting error when trying to use =related function in PowerPivot

Greetings,
I have created a relationship between two tables based on a common field in PowerPivot, and whenever I use the =related() function to try and bring data from a field in one table to a field in another table, I keep getting and error message that says:
The column 'XXXX[xxxx]' either doesn't exist or doesn't have a relationship to any table available in the current context.
Any ideas? I've made this work before in a different dataset so I'm not sure what I'm missing. I have a feeling it might be really basic, but I'm spinning my wheels here.
Thanks very much!
MFW

Hi MFW,
This sounds like the table where you are trying to use the RELATED function from is on the
one side of the one-to-many relationship (i.e. the relationship arrow is pointed towards it). If in reality there is only a
one-to-one relationship between the data and you only need to bring the data from one table to the over, you can simply reverse the direction of the relationship and the RELATED function will work as expected. If this is not the case then you'll
need to use RELATEDTABLE instead of RELATED and some kind of aggregation or computation that ensures that a single value is returned for the column you are trying to get data from. There is also another function called CALCULATE which can be used for
this scenario.
Imagine that we have two simple tables: Table1 and Table2...
Table1
Column1
Column2
1
A
2
B
Table2
Column1
Column2
1
AA
2
BB
...and create a relationship where Table1 is on the many side and Table2 is on the one side i.e. Table1 -> Table2
We could use a number of methods to pull the the values from Column2 in Table1 into a new Calculated Column in Table2.
If the column we are trying to pull contains text values then we could use a combination of the CALCULATE and LASTNONBLANK function:
=CALCULATE(LASTNONBLANK(Table1[Column2], TRUE()))
If the Table1[Column2] contained only numeric or date values then we could use a combination of the RELATEDTABLE and MAXX functions:
=
MAXX(
RELATEDTABLE(Table1),
Table1[Column2]
An alternative to the DAX directly above is to use the CALCULATE and MAX functions:
CALCULATE(MAX(Table1[Column2]))
You can learn more about the functions I have referred to below:
CALCULATE
LASTNONBLANK
RELATEDTABLE
MAXX
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com, Twitter:
@nimblelearn

HT1212 I keep getting error when trying to restore my ipod

When I try to restore my 'disabled ipod' I keep getting an error message - 3094 (I think) what am i doing wrong?

Was it really error 3194
See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to solve iTunes error 3194 in 10 simple steps

Error when trying to upgrade Acrobat Pro 10.1.1 to 10.1.2 with an AIP

I am trying to use an AIP to update Acrobat Pro from 10.1.1 to 10.1.2.
I run msiexec /a AcroPro.msi with the base 10.0 msi on the CD.
I then cd to the AIP
I then run msiexec /a AcroPro.msi /p AcrobatUpd1012.msp
I then use the Customization Wizard to generate a .mst. with serial number, remove shortcuts, etc.
I then configure a GPO with the .msi at the AIP and apply the .mst in the GPO using computer configuration.
When test machine reboots GPO attempts to install, but fails with error %%1274 in Windows System event log.

You need to look at this Adobe KB document;
http://helpx.adobe.com/acrobat/kb/update-patch-acrobat-reader-10.html
Here is the crux of the issue though.
Acceptable AIP patch patterns for Windows deployments
Acrobat (Formula = Base release + latest quarterly + latest out of cycle patch)
Acceptable: 10.0.0 > 10.1.2 (Q)
Acceptable: 10.0.0 > 10.1.1 (Q)
Acceptable: 10.0.0 > 10.0.1 (Q) > 10.0.3 (OOC)
Unacceptable: 10.0.0 > 10.1.0 (Q) > 10.1.1 (Q)
Reader (Formula = last MSI + latest quarterly + latest out of cycle patch)
Acceptable: 10.1.0 (Q MSI) > 10.1.2 (Q)
Acceptable: 10.1.0 (Q MSI) > 10.1.1 (Q)
Acceptable: 10.0.0 > 10.0.1 (Q) > 10.0.3 (OOC)
Unacceptable: 10.0.0 > 10.0.1 (Q) > 10.0.3 (OOC) > 10.1.0 (Q MSI)
One more thing. Don't expect that the new AIP will uninstall the old AIP. It's best to remove the old AIP with msiexec.exe /x {GUID} first and then install the new AIP. You can manage the reboot as you wish with either SCCM or MSI command line switches or properties.

Keep getting errors when trying to open JAR files

Hi
My son is trying to open a .jar on his Macbook to add a mod to Minecraft. It throws an error and directs him to Console each time, but Console isn't showing any errors. Using advice on a couple of similar threads I followed some steps but ended up at a dead end.
The Terminal message I get when I follow the steps in another thread is this:
Exception in thread "main" java.lang.NoClassDefFoundError: org/eclipse/swt/widgets/Display
Caused by: java.lang.ClassNotFoundException: org.eclipse.swt.widgets.Display
          at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
          at java.security.AccessController.doPrivileged(Native Method)
          at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
          at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Any help on what I need to do to resolve this so he can open it will be much appreciated.
Thanks
Andy

Hi Eric.
I am referring to the main Console. I don't see anything in Java Console - but the steps I followd in teh other thread yielded that error message from Terminal - it was different from the error in the other thread, which related to out of data Java install. I have no clue what this is and Google isn't helping me much.
Any light that can be thrown on on this woudl be great
Thanks

Ipod nano 6 keep getting error when trying to sync ipod with itunes. Cannot copy cos cannot be found. Latest versions installed

I have had the ipod for some time and am not having a problem with the iphone or ipad. I have reinstalled the itunes and real time but am still getting the following message: Some of the tunes in the itunes library were not copied to the ipod because they cannot be found. 100+ problems - keeps selecting different tunes.

Hi Jullo59,
If you are having issues with iTunes being unable to locate files, you may need to rebuild the iTunes library. The following article may be helpful:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Cheers,
- Brenden

TS3274 I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine.

I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine. Help!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I keep getting errors when trying to download Acrobat Pro.

Similar Messages

Maybe you are looking for