I keep getting "Help us improve Adobe products" everytime I open CS5 extended.

I have tried everything to get rid of this with no luck. I have run out of sollutions. Help needed.

This should help. Help Improve Adobe's Products prompt keeps appearing | Mac OS 10.8
~ Arpit

Similar Messages

Help us improve Adobe products

Every time I drag an image into Photoshop CS 5 I get the splash screen shown below. I doesn't mater if I choose Yes, or No. I still get this screen. What can I do to prevent this annoying occurence?
Thanks,
Don

Don,
The reason that you could not Edit your Reply, was because Conroy (in this case), had Replied to it. Once Replied to, only a MOD can Edit your Post. At that point, you did the correct thing, and your screen-cap is good in that Reply. I have not encountered this screen, but do worry that when you decline, it comes back. Have you cleaned out Adobe cookies recently?
For pop-up surveys in the Adobe Forum (they do that, and often from a 3rd party survey company), if one declines, they do not get the survey offer - until they clean out their Adobe cookies. Not sure if this one functions the same way, but feel that someone will.
Good luck,
Hunt

I'm stuck on the "help us improve adobe's products" screen when I try to start Photoshop CC

I keep trying to start Photoshop CC but it won't let me get past the dialogue box that asks me to help improve adobe products. How to I get ride of it?

Sounds like two totally different problems to me.
It may help to reset Photoshop's preferences to defaults... You can do this by pressing and holding Control - Shift - Alt (Command - Shift - Opt on a Mac) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
-Noel

I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

If you have Intego VirusBarrier X6 installed
1. Open /Applications/VirusBarrier X6.
2. Click on the "Surf" button.
3. Click on the "Ad Banner Filter" tab.
4. Click "OFF" next to "Banner advertisement filter".
5. Start the computer in Safe Boot, then restart the computer into normal mode.
If don't not have Intego Virus Barrier installed
1. Verify that the date and time is correct on the computer.
2. Safe Boot once, then restart normally, then try downloading again.
3. Try with a different user account if the issue persists
If the issue persists
Install Lion onto an empty partition (internal or external).
Note: You can Use Disk Utility to live partition the internal drive and create a second partition large enough to install Lion.
Start from the clean installation of Lion.
Download Mountain Lion from the Mac App Store. Note that the original startup disk can be set as the destination for Mountain Lion during the installation process.

"Help improve Adobe products" window crashes Photoshop CS6

Most od the times when I try to open a Photoshop CS6 file (MacBook Pro Retina, Mac OS 10.8.3) and the "Help improve Adobe products" window shows up, no matter if I press the "Do not participate" or "participate" button, the program opens but all tghe menu items appear in gray or the program crashes

Same problem here, can no longer use Photoshop. Have never installed MacKeeper or MacCleaner which are named as culprits in other threads.
Macbook Pro C2D 2.4ghz with 4GB ram, used to work fine.

I have downloaded Adobe Photoshop digitally but when i activated adobe I keep getting this error message Adobe Premiere Elements.exe - NO DISK. There is no disk in the drive. Please insert a disk into drive/device/harddisk/dr1

I have downloaded Adobe Photoshop digitally but when I activated adobe I keep getting this error message Adobe Premiere.exe - NO DISK - There is no disk in the drive. Please insert a disk into drive/device/harddisk/DR1

It sounds like you downloaded the wrong application, namely Adobe Premiere Elements.
If you meant Adobe Photoshop Elements, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content
If you mean Photoshop proper, since you are posting in the Photoshop forum, give version details and your system specs.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How do I get help reinstalling my Adobe creative suite 6 after IMAC IOS 10.8 crashed?

How do I get help reinstalling my Adobe creative suite 6 after IMAC IOS 10.8 crashed? Apple had to reinstall operating system and all programs & data were lost. Adobe System say serial number valid, but qualifying product can not be found on this computer.

When you're installing Adobe upgrades, there are two ways of doing it:
Have an existing, qualifying version already installed. Install the upgrade and enter your upgrade serial number. The installer will detect the earlier qualifying version already installed and the upgrade will finish installing. That is not your scenario.
The second option (and easiest on new computers with no Adobe software previously installed) is to simply install the latest version (usually an upgrade) and enter your upgrade serial number. That's what you've done so far.
The installer will look for an earlier version already installed on your computer. If it cannot find one, it will prompt you to enter the serial number from an earlier version. Once you enter the earlier qualifying version serial number, the upgrade installer will complete the installation. If you cannot find an earlier version serial number then the upgrade will not be licensed and will go into trial mode. From there you can use it for 30 days until it will no longer launch.

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Problems installing Photoshop CS4, keeps getting stuck on "installing Adobe Air." Tips?

I'm trying to install Photoshop CS4, but it keeps getting stuck on "installing Adobe Air" every time. Freezes, makes no more progress, eventually I have to force quit. I've even downloaded and installed it (Air) separately, but it keeps getting stuck on it in the CS4 install. Any tips? I'm running 10.8.5 on a MacBook Air. Saw something about deleting Adobe FlashPlayer to maybe fix it? Any and all tips welcome. Thx.

Googling only comes up with a couple things where someone was trying to
install a cracked version they downloaded, so it could be a corruption
problem.
If this is a downloaded installer, then redownload it and try installing,
again.
If you are inserting a DVD and autoplay is starting up and you get this
message, you can shut down the installer process as you've done then instead
of double-clicking the DVD, use right-click Explore to view the files
directly on the DVD without running AutoPlay, then find the setup.exe or
something.MSI with EN in it's name to run the installer, directly, without
goint through autoplay. This would only make a difference if the autoplay
is corrupted somehow but everything else is ok. Since your error message
talks about autoplay then maybe that is the case.
If you are calling Adobe for support, it can take hours, depending on when
you call.
This "open letter to Adobe customers" was posted within the last few days
and basically apologizes for poor support, recently, while they change from
support-provider to another:
http://www.adobe.com/support/pdfs/open_letter_to_adobe_customers.pdf

I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

Adobe Acrobat 8.0
standalone version
Worked for years.......pc crashed.......fresh install of everything, but Acrobat will install, but I get error message when I try to use.

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.
I need to take care of this. I have reinstalled it 3 times and still get the same message.
Any suggestions?

Firefox is trying to update but it can't because Firefox is running
Open the task manager with Ctrl + Alt + delete. Click on the Processes tab and find firefox.exe. Click End process

I keep getting notices to install Adobe Flash Player version 10, however when I click on the various boxes, it then tells me that Flash Player does not support Vista. What does all this mean?

I keep getting notices to install Adobe Flash Player Version 10, however when I click on the various boxes, it then says that Flash Player does not support Vista. What does all this mean and what is a Flash Player?

I keep getting notices to install Adobe Flash Player Version 10, however when I click on the various boxes, it then says that Flash Player does not support Vista. What does all this mean and what is a Flash Player?

I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

Keep getting error code 10657 when I try to open certain applications?

Hi! I keep getting an error code when I try to open certain applications, such as iTunes or Adobe PhotoShop... it reads error 10657?

See this archived discussion: https://discussions.apple.com/message/7005768?messageID=7005768
Bob

I keep getting the same message when I try to open files on Internet. Before viewing doc must agree

I keep getting the same message when I try to open files on Internet. Before viewing doc must agree to end license agreement & Quit & relauch browser. I've done this.over & over. Now what?

Test Screen Name wrote:
When you launch Adobe Reader you should get the license agreement.
- Do you get the license agreement?
When you launch Adobe Reader you should NEVER get a message that it is already installed. That would mean you were trying to install it. NOT launch it.
I agree.
Installer:
Application:
If you're launching the first one... you're trying to reinstall it.

I keep getting "Help us improve Adobe products" everytime I open CS5 extended.

Similar Messages

Maybe you are looking for