I keep getting Itunes stopped working message. I am operating windows vista. problem details

Problem signature
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 11.2.2.3
Application Timestamp: 5383f31a
Fault Module Name: StackHash_fd00
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000008
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Extra information about the problem

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • "Customized Icon and Label has stopped working" message on startup in Windows Vista after latest iTunes upgrade

    I upgraded to the latest iTunes as part of the process for upgrading my iPhone to iOS6.
    Now I get a message window with the above message when I start Windows Vista.
    Besides the nominal inconvenience of clicking to close the popup window, is this a problem?

    Same exact problem with my iPod Touch ever since updating iTunes to 10.4.1. I've reinstalled iTunes and still no progress. What the ****, Apple?

  • Keep getting "itunes not working"  when trying to sync my music to my iphone4

    keep getting "itunes not working"  when trying to sync my music to my iphone4

    Just a basic gateway computer from futureshop(bestbuy) I get that message about half way through the sync then it closes iTunes?

  • I Have trouble redownloading my purchase because it keeps staying itunes stop working or boujour is disabled

    I have trouble Re Downloading purchase on ITunes and it keeps saying ITunes stops working What should I do?
    Why Does it say Boujour is Disabled?

    Hello Caramel89,
    Lets start with fixing one issue at a time. First, lets try and get iTunes from crashing on you by checking out the article below. It will walk you through opening up in Safe Mode, trying to open iTunes in another user, and even remove iTunes and its associating software and reinstalling it. Once that is done, test to see if you can download any past purchases and if you are still having issues, let me know what you are experiencing and I will come back with some more troubleshooting for you. 
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    -Norm G. 

  • Getting itunes has stopped working message after downloading to Windows 8.1

    Getting ITunes has stopped working message after 10 seconds after downloading to Windows 8.1

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • Keep getting itunes not working when accessing store windows 7

    I keep receiving the message" iTunes stopped working" only when trying to access the store.  Using windows 7 and have all of the latest updates.

    Greetings glennafrommurphysboro,
    Welcome to the Apple Support Communities!
    I understand that you are having issues connecting to the iTunes Store on your Windows computer. In this situation, I would recommend working through the troubleshooting steps located in the attached article to help resolve the issue. 
    Can't connect to the iTunes Store - Apple Support
    Cheers,
    Joe

  • How can I get MagicTrackpad to work with Boot Camp and Windows Vista?

    Just installed Lion and then installed Magic Trackpad. Now I need to know how to get the Magic Tackpad to work with Windows Vista in my Boot Camp partition. Windows Bluetooth recognizes the Magic Trackpad but it says the device won't confirm the passkey. No passkey came with the Magic Trackpad and the option to not use a passkey still doesn't achieve connection with Windows. Suggestions/ comments, please.
    TIA,
    Picman

    UPDATE
    Just completed several lengthy sessions with Apple Tech Support (escalated to excellent Sr. Advisor). Bottom line is that there seems to be no answer to the problem of the Magic Trackpad not being able to maintain its pairing/connection with Windows (Vista in my case) or OS X (10.7 in my case) when switching Boot Camp partitions. In fact, when trying to re-pair it is necessary to remove the MTP batteries first. To pair at all with Windows requires the use of the Bluetooth passkey "0000" (not provided in MTP documentation). This achieves limited MTP/Windows functionality (cursor and "click" control only - with BC 3.1. BC 3.2 is supposed to provide more gestures, but I have not gotten there yet). Appears that when switching back to OS X, that passkey has remained with the MTP and is not what OS X is looking for, so it fails the connection. Removing/replacing the batteries probably dumps the passkey and allows the OS X connection. The Sr. Advisor says he sees this issue often (including with Windows 7) in their internal chat rooms, but no solution. He will be referring it to the engineers and will let me know the outcome. Meantime, assuming I keep the MTP, I'll have to resign myself to using a wired mouse when going to Windows (not a huge inconvenience, since it's only for Quicken; but the issue is worse than "in-elegant" for Apple!
    I am satisfied that I have obtained the best possible help from Apple on this issue. If anybody has more, please reply.
    Thanks,
    picman

  • Keep getting itunes store error message at startup or launch.

    The full dialogue message is "The itunes Store is disabled in the parental preferences, so itunes could not complete your itunes store request" and it occurs with every launch of iTunes at startup. iTunes Store is switched off in the parental preferences as I don't make iTunes requests or buy grossly inflated virtual product, only hard copy CD's or DVD's. This message started appearing with Mountain Lion.
    Does anyone know how I can switch this error message off?
    Time to remove the pernicious iTunes from my Mac?
    Thanks.

    Please see solution in http://kb.mozillazine.org/Problematic_extensions
    for "McAfee Site Advisor".
    (Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • When iTunes closes I get " iTunes has Stopped Working message"?

    iTunes works and runs fine on my Vista Ultimate system, however, every time I close iTunes I get a message stating that iTunes has stopped working. I havn't noticed any functionality loss, it's just that the dialog box is annoying. I just did a recent clean install of my Vista OS. Was the same way on last two versions of iTunes. Ran and installed Windows updates, reinstalled iTunes and Quicktime. Created and additional user and same message for that user.
    Running Norton 360, Ghost 12, Logitech 518 mouse G15 Keyboard, and software is Nero 7 ultra, Pinnacle Studio 11, PowerDVD 7, Call of Duty: UO.
    Any suggestions?
    ty

    Hi,
    I experience a similar issue.
    iTunes runs fine, and I can sync my nano as I did on XP.
    When I listen to music through my Airtunes device, music streams just fine,
    but when I close iTunes, I get the "Stopped working"-message.
    If I change back so I listen on the computer instead, and then close iTunes, everything closes just fine without the error.
    The error is reported as follows in Event Viewer:
    Faulting application iTunes.exe, version 7.4.3.1, time stamp 0x46f9e539, faulting module iTunes.exe, version 7.4.3.1, time stamp 0x46f9e539, exception code 0xc0000005, fault offset 0x001227ac, process id 0x1348, application start time 0x01c80b73fd90b27c.
    Do you also use AirTunes when you get the error?
    Any help would be greatly appreciated.

  • "itunes has stopped working" message when syching iphone

    Need help..
    Ever since I installed the update for the apple software on my PC, when I try to sync my iphone 4 on the last step of synching I get a window popping up saying that "itunes has stopped working". Then I get prompted to close the programme.
    I run Windows 7, and cannot understand why it does this.
    If anyone can help, I would greatly appreciate it.

    Not sure what you've seen/tried so far, so I'll run you through my standard advice as of this morning, Marty.
    There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
    (3 and 4 do help with the device-syncing variation.)

  • Itunes stops working when I import

    I'm trying to import book files from my attached storage device.  Everytime I click "add to itunes", I get an error message that iTunes has stopped working.

    there's a bug with 10.1.0.54 that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices.
    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though) and/or switching off the option to convert files to 128 kbps AAC when syncing.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
    (2 and 3 do help with the device-syncing variation.)

  • TS3988 I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message.  Any ideas?

    I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message.  Any ideas?

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • Itunes stops working in windows 8.1

    When I access itunes in windows 8.1, and try to enter the store. Itunes stops working message appears and crashes itunes.
    I have tried uninstalling and reinstalling - not fixed.
    I have ried to repair - not fixed.
    tried all the discussion group suggestions - not fixed
    Is this the return of MAC vs. PC wars of 1984

    i've found something http://download.lenovo.com/lenovo/content/windows8-1/upgrade/ideapad/index_en.ht ml
    1. Model compatibility
    - Ideapad can only support the current preloaded hardware and software configuration. Therefore, depending on a specific configuration, it might not be recommended to upgrade your computer. That is because some hardware issues cannot be resolved currently. 
    It is not recommended to upgrade the following models to Windows® 8.1 because some VGA related issues cannot be solved by the vendor, currently.
    U310, U410, U510, U410 Touch, U310 Touch;
    Z500 Touch, Z500, Z400, Z400 Touch, Z380, Z480, Z580, Z485, Z585;
    S300, S400, S400u, S400 Touch, S405, S206, G485, G585, N480
    I should have read this before updating lol .... i hate my self right now lol

  • I uploaded the newest version and itunes stopped working!

    I uploaded the newest version and itunes stopped working!  This on my windows computer at home, can anyone help?  Sorry,  by not working I mean I click on the icon and itunes starts up - shows me the library screen with all my music on it, says accessing account and then pops up a message saying it has encountered a problem and needs to close.  When I say ok, it closes and goes away!

    This is CoconutDonuts solution and it worked for me
    May 17, 2014 2:44 AM (in response to Kittyinaz)
    Just fixed this issue for iTunes for Windows with minimal damage, try:
    1. Browse to "C:\Users\<YourUserName>\AppData\Roaming" in Windows Explorer.
    2. Rename the "Apple Computer" folder to "Apple Computer-old".
    3. Start iTunes
    4. Close iTunes
    5. Copy the file "iTunesPrefs.xml" from "C:\Users\<YourUserName>\AppData\Roaming\Apple Computer-old\iTunes"
    6. Paste the old "iTunesPrefs.xml" into the new "Apple Computer\iTunes" folder iTunes just created (not the one you renamed) under "C:\Users\<YourUserName>\AppData\Roaming\Apple Computer-old\iTunes"
    7. Overwrite the new iTunesPrefs.xml with your old copy of the file.
    If you don't care about losing your iTunes preferences then you can just do step 2. You can always go back and grab things from the old folder later if you realize you wanted to have your EQ settings, individual track gains, etc...
    THIS WORKED FOR ME

  • Itunes stop working when importing cd

    Every time I try to import a cd, itunes stops working and closes down. What do I do? Please Help! And where did gracenote come from. That never showed up before. Anyone know how to disable gracenote?
    Thanks, Amanda

    There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
    (4) Or, if no known-good copy of 7.9.3.0 is available and your PC doesn't have a shadow copy of the 7.9.3.0, you can replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 by performing some installation gymnastics with the current (11 am 18 Nov NZ time) version of the Safari 5.0.2 installer, as per:
    http://discussions.apple.com/thread.jspa?messageID=12598386&#12598386
    *NB with (4) if you have a 64-bit version of Vista or 7* ... the Apple Application Support program files are instead located at:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support\
    (2, 3 and 4 do help with the device-syncing variation.)

Maybe you are looking for

  • Error when logging into Yahoo homepage

    i get a question on the bottom of my screen when i log into my yahoo.com home page: Do you want to save yql?format=json&yhlVer=2&yhlClient=rapid&yhlS=150002829&yhlCT=3&yhl... from geo.query.yahoo.com? options under save are save or save as. cancel bu

  • Game constantly shut because of "problem"

    I purchased a copy of the game Portal 2 yesterday. Once I relized that it wouldn't play at full speed on my Pavillion 4G,  I quickly switched a few of the video options in the game,  for the rest of the day, it ran just fine. I was playing the game t

  • WEB dynpro UI - tag verification

    Hi, can anyone tell me how to customize verification in destopapp UI? tag commisioning works fine but when I click on tag verification I see "X" and no logs in application log does anyone know what more needs to be done (or is there any "how to doc"

  • Transporting columns into rows using SSIS

    Hi everyone, Just need some help. I wanna transpose a data table in SSIS. The table is originally  CUSTREFNO Citizen FORENAME Citizen SURNAME Citizen DATE-OF-BIRTH Citizen TEL_NO Citizen GUARDIANNAME Citizen ADDRESS1 Citizen ADDRESS2 Citizen ADDRESS3

  • Is it possible to write to an open DOS windows - command line

    HI, I am able to open applications from LabVIEW, But except for the first command I am unable to write to the same application again and the LabVIEW will always open a new application. Is there a way to communicate with a DOS window application witho