I keep getting message "Your MacOs X start-up disk has no additional room for application memory"
I continue receiving the following message on both my iMac and MacBookPro: "Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using." I started getting these messages, on both computers, during the same week.
I have over 500 GB free space on my iMac HD and 4 GB RAM. On my MBP, I have 472 GB free on my hard disk and 8 MB RAM. BOth are running Mac OS X 10.6.8.
Any ideas what is going wrong here?
By way of further explanation, your computers each sometimes require the use of Virtual Memory whenever the RAM is fully in use. The Virtual Memory is actually unused space on your harddrive where the computer temporarily store data since the RAM is full. To be effective, your harddrive, or more correctly, the partition that OSX is installed on should have at least 15% Free Space to be used as Virtual Memory.
If you have multiple partitions on your harddrive, it is possible that the partition that OSX is on is too small in storage capacity and so you lack adequate Free Space on that partition to be used as Virtual Memory. Thus you get the Warning Message.
Similar Messages
-
"Your Mac OS X Startup Disk Has No More Space For Application Memory"
I've been having a problem in the last few days with my Mac. I would be surfing the net, or doing whatever, and an error message would randomly pop up on my screen. It would say: "_Your Mac OS X Startup Disk Has No More Space For Application Memory_". Then the dialog box would give me the option to PAUSE or *Force Quit* applications. But instead of letting me click these buttons, my Mac would just automatically freeze after the dialog box popped up!
The odd thing is, is that I truly was NOT using that much memory...much less than I usually do. Plus I have 4 GB of RAM, and I know I wasn't maxing it out.
Does anyone know why this error message would be popping up like this (especially since there was no way that I was using all my Application Memory)? And does anyone know why my Mac just freezes instantly when the error message pops up?
Any help would be GREATLY appreciated! It's quite hard use my Mac right now, since I never know when it's gonna freeze up on me!
Thanks!I assume that means no backups? That's a problem you need to fix next.
You might be able to start your Mac in "Target Disk Mode" while connected to the other Mac. You do this by holding down the "T" key while booting. And I was wrong: you must use Firewire, not USB.
The other Mac will see your HD as an external F/W drive. You may have to "mount" it via Disk Utility, if it doesn't show up on the desktop and/or Finder sidebar.
You probably need to do a lot of examining what's not needed, and perhaps some maintenance, but you don't want to do that under pressure.
To get it running and buy just a bit of time, your best bet is to copy some big stuff (like video) either to the other Mac's hard drive or to one or more DVDs, then delete it from your HD.
Once you get several GB free, you should be able to boot it. Then get started cleaning it up. There are many threads in this forum with links and suggestions for how to do this. Just search for +Disk Full.+
Did this happen all of a sudden? If so, it's possible you had some sort of runaway or continually failing process, filling up some logs and/or caches. If you don't do routine maintenance, either by clearing your browser cache, etc., manually, or via an app like OnyX, that's another thing you might want to investigate. -
My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while
Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.
-
Receiving message "your Mac OSX start up disc has no more space available for application memory."
This has just started in past week, I removed about 6 apps from dock to see if it cleared it but message still appears. Mac is iMac 5 with Mountain Lion (10.8.4)
Would appreciate some help.
BarbThe message has nothing to do with available disk space. There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
i want to install imovie 10.0 but keep getting message : your computers video card does not meet the minimum system requirements ? what should I do ?
There are some suggested solutions in this thread:
https://discussions.apple.com/message/23486450#23486450 -
When doing catalog backup get message " your system is low on disk space, and elements organizer can
When doing catalog backup get message " your system is low on disk space, and elements organizer cannot perform the operation. If create a catalog with 20 pictures backup works OK. backing up to a 1TB external drive. Have 16705 pictures in catalog. Total disk space for pictures is 192 MB. Why am I getting message?
kdrozzen a écrit:
Total disk space for pictures is 192 MB.
Do you really mean MB (megabytes) or GB (gigabytes) ?
Even if its GB, the free space may be enough, depending on your files size, especially with videos or raw files.
When you start the backup process, it first shows you the total size of the catalog. -
When I open my iMac, I get the following message : Your Mac OS X startup disk has no more space available for application memory. Then it says to quit applications not in usw and to close windows and remove files from startup disk. It lists Safari, email and Finder. I force a quit on all applications yet the same message comes up every time I open an application. What do I do to get rid of this once and for all? The computer is not even two years old and is only used for email and Safari. Help will be greatly appreciated,
The message has nothing to do with low disk space.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
I was excited when my iPhone 4sarrived yesterday. I charged it but today when I tried to download iTunes in order to activate the phone I found that I was unable to download it successfully. I keep getting a message that tells me to Verify that the package exists or contact the application vendor. I have no idea how to do any of this. I was downloading from the AT&T support site.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
My MacBook Pro is giving me teh following message box. "Your Mac OS X startup disk has no space available for application memory" How do I correct this to improve the MacBook's performance?
There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
Another process often implicated in memory leaks is "inkjet8," which is a component of the HP printing softwre. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
IMac 27" Start Up Disk has no more space available for memory
I get this message on occasion now. The Message, "Your Mac OSX start up disk has no more space available for application memory".
I have a 1 TB HD ,799GB Available, 220GB Used. Running 10.6.2 OSX.
I have tried Onyx, repairing permissions in the disc utility, and the problem goes a way for a while but will pop up if I start running multiple apps.Rebooting seems to cure this problem for a while.
Looking for answers.
thanksHi and Welcome to Apple Discussions...
Try booting fron your install disc. The startup disk may need repairs.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
Carolyn -
I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99807) -
Last time I opened ITunes, was told I did not have latest version and proceeded to download new version. As it was loaded, keep getting message that Apple Mobile Devices failed to start, verify that I have sufficient privileges to start system services. I am the only user on the computer and in household. I have tried installing several timees and keep getting same message.
What should I do?Hey CarleneS,
First, I would try the steps in here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
If you end up having to remove and reinstall iTunes, make sure you follow all of the steps in this link:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Regards,
Delgadoh -
Keep getting message when trying to sync my ipod (could not synced because the sync session failed to start)
Have you seen this Apple support document?
http://support.apple.com/kb/TS3221
B-rock -
I cannot install the new version of iTunes on my PC. Keep getting message, apple mobile device failed to start.
Follow the directions of tt2 in https://discussions.apple.com/thread/5822086
-
Trying to update iTunes on XP. Keep getting message "could not access network location iTunes\."
Any ideas"could not access network location iTunes\."
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
My iphone display is broken. how can i get a new display?
hello. the glass on my iphone4 is cracked. so i just woundered if i can just change the glass or if i have to change the LCD aswell. the touch is working but not fine and there is no black dots or anyting in the display. and how much would it cost a
-
Need help removing Creative Audio Control Panel
So I've been trying to get the Creative Consol Launcher to work with my soundcard again and found that in my "Programs and Features" list in windows 7 there is one item of Creative labs software that I can not remove. It is called "Creative Audio Con
-
Hello, I have already burned DVD in the past with menus with PE7 but now when I try to do it, the program crashes before strating burning the DVD. I can export it to my computer but then I loose my menus. Anyone can help me please? Thanks in advance!
-
Settting render attribute doesn't render the child taskflow
i am having 2 taskflows which is consumed by a consuming page. On the consuming page on which these 2 taskflows are dropped as region. the 2 regions are placed along with some buttons inside separate panelGroupLayouts. i mean in 1 panelGroupLayout 1
-
I try to see a movie, an error is displayed: An error ocurred loading this content. Try again later, and i can´t see the movie and I payed for it. What can i do, I tried at least 10 times, and the problem continues