I keep getting "startup disk full" message even when I already moved all my files/documents to an external hard disk

Dear all,
What should I do? I keep getting the "startup disk full" message even when I already moved all my files and documents to an external hard disk.
Thanks a heap.

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Similar Messages

  • Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

    Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

    The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
    Clearly state the Troubleshooting Steps you have tried to Resolve it

  • I have moved all my songs onto a new external hard drive but it has wiped my iPod clean. Although when I connect my iPod it's starts teh process of sync'ing - so many songs in I get a pop up advising the siong could not be read or written to?

    I  have moved all my itunes onto a new external hard drive to free up space. It has wiped my ipod clean! I can still see the itunes on the new hard drive so I restored my iPod and tried to sync. Although when I connect my iPod it's in the process of syncing, so many songs in I get a pop up saying could not copy to my iPod as xyz song title could not be read or written. I click ok for this pop up to dissapear and then another pop up appears saying could not coyp to iPod because of unknown error.!!! Help I'm going crazy.

    Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location.  Select the location of your on external hard drive. 

  • Keep getting startup disk full messages but I have plenty of HD space

    Hi all,
    I've been experiencing a odd problem on my 18 month old 13" MacBook Pro. As of last week, I keep getting the dreaded "Your startup disk is almost full" and "Your startup disk is full" messages, yet I have over 7GB of hard drive space available (in addition to 8GB of installed ram) seemingly at random times. I noticed this message come up immediately after a restart this morning, as well as when I woke from display sleep earlier today, but most of the day the messages pop up (sometimes it's "almost full", sometimes it's "full") every 30-60 mins or so. I then immediately check my available space and it reads a solid 7GBs.
    Any idea what's going on, or how I can fix this? I'd like to fully understand why this is happening so I can prevent it from coming up in the future.
    Thanks!
    Addendum: Ok, did a few restarts and it's confirmed: I get the "Your startup disk is full" message when my login screen appers, every time. Help!

    Mike Amin wrote:
    1. Since when have Mac users needed to adhere to the "10% rule"?
    Since hard disk's where built into computers regardless of Mac or others.
    10% is just a arbitrary value in a configuration file: Warn at x% - for at least three reasons:
    If a disk run full the system is not longer able to extend logfiles, configuration files, the Mac's equivalent for /proc or the swap space.
    This will cause the system to freeze and/or prevent the next boot.
    On shutdown the system could not write out the data buffered in memory to the disk.
    Thereby data may be lost or the filesystem corrupted as a result.
    Imagine your 7GB free and the system tríes on shutdown to write back 9GB RAM buffer ...**Do'h**
    For user safety. Imagine you have only 5GB free and you load a 7.5GB RAW image file into a application. **Do'h**
    Mike Amin wrote:
    4. Lupunus, you mention that "available space" is different than "true space". Can you elaborate?
    The displayed "Available Space" did not include the cached/buffered files, as to display that value the "sync" command get not invoked.
    The kernel keeps data in memory to avoid doing (relatively slow) diskreads and writes.
    sync writes any data buffered in memory out to disk.
    Lupunus

  • Why do I keep getting a storage full message after deleting most of my photo app, on 16gb iPhone6

    Hey,
    I just purchased the new iPhone 6 16GB.upgrade jump T-mobile not paid in full $700.Nevertheless, why do I keeping getting a message about storage full? And it says...Go to setting and manage storage with iCloud. I have deleted most of the app, photo, and just about everything else, and still keep getting this message. It's almost as if I will be paying additional 3.99-19.99 a month to manage the icloud for apps that I already had. Perhaps this is the gimmicks to order the 64GB iPhone 6. In fact, the 64GB is offered as an upgrade to new or additional line customers. Come On give us a break for the loyal customers Geezh!!
    Plus can't even upgrade software update to iOS8.1.1 because there is not enough storage. What sense does that make to even upgrade to the new iPhone 6???? Hurry up and fix this problem!

    Purchasing iCloud storage will not help your issue. Also, if you want to upgrade, do it via iTunes rather than OTA - it doesn't require as much available storage to do it that way.
    To check to see what is taking up so much of your storage, go to Settings>General>Usage>Manage Storage, and you will see a list of the items on your device and the amount of storage they are taking up.
    T-mobile's offer of the 64GB iPhone 6 to new or additional line customers has nothing to do with Apple. You need to take that up with T-mobile.
    Cheers,
    GB

  • I keep getting the itunes update message and when I accept the terms and conditions it just keeps going back to tell me I have 3 updates itunes, safari and icloud and goes back to accept message without actually downloading?

    What is going on with itunes update?  I keep getting the message that updates are available for itunes, safari and icloud, but when I accept the terms and conditions and the install 3 items message, it keeps going back to telling me there are 3 updates available and have to accept terms and conditions again without it ever installing!! I am using a PC with windows vista.  Have not had this problem till December when I got an ipad and had icloud installed, don't know if there is a connection.

    I can't offer any help but it soulds like Apple goofed with the latest update. Many of us have the same problem. I may wait a week or so to see if Apple responds.

  • I keep getting a signed out message even after doing everything they have asked me to do in the help options

    I have done everything in the help options to fix this sign in problem with the message saying you have been signed out. Is anyone having this issue as well?

    Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
    -and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    -and 'looping' https://forums.adobe.com/thread/1504792
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I have purchased a 3TB external hard drive. I took it to the apple store. They moved all of my iTunes to the external hard drive. I still keep getting the message that my start up disc is full. Please help.

    What else can I do. All of itunes should be on the external hard drive. I think 3TB is plenty of space. Could it be my iphoto? I moved all those to the external hard drive too.

    lllaass wrote:
    Yes, you should format the HD.
    A Mac can natively write to a NTSF drive and that is what most drives com formatted with.
    You should use the Mac journaled format.
    Once again you are posting incorrect information
    Until we know what format the drive is it is impossible to state that it must be formatted - that is just a guess
    And a Mac can not Natively write to an NTSF drive - it can natively read it but can not write to it with special software
    And since formatting a drive erases it it is critical to tell users not to format until they have a positively known good backup
    The TOU for these forum state that you should test your answers prior to posting them  --  you obviously are not doing that and you advice is endangering users photos - please only post tested answers
    LN

  • I can't access this one website, when I get page load error message, even when my cookies/cache are cleared?

    For the past couple of days, I'm not able to access this one website: http://www.eboards4all.com/364378/. In the past, I've been able to access it fine, even on Safari, up until last Wednesday. Then I've been getting the page load error message on Firefox or page not loading message on Safari. I've asked others who use our forum via email about it--they're able to get to it fine. I believe, this all started, when I downgraded Firefox on my OS X, last week, by accident, and had to go to a lower 3. My Imac is 6 years old and I don't have money for the latest versions or the new one to come out last week.

    If you think it might be your Firefox version, you might be able to run 3.5.19. Certainly that would be more secure than 3.0.11.
    ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.5.19/mac/en-US/
    I recommend backing up your Firefox settings first in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)

  • Why do I keep getting proxy server refusing connections - even after I already reset to NONE?

    After downloading your new version of Firefox 4, I constantly get the same "proxy server refusing connections" screen. I have gone into options and changed the proxy server to "none" at least 25 times in three days. This is a ridiculous waste of my time! How can this be fixed? or if not, how can I go back to a previous version of Firefox that doesn't have this stupid issue?

    Doesn't that 'No proxy' selection stay selected ?
    * http://kb.mozillazine.org/Preferences_not_saved

  • Keep getting "out of paper" message, cannot print Photosmart 3150

    keep getting "out of paper" message even though tray is full. No paper jams, checked front and back doors. cannot print Photosmart 3150

    Please read this post then provide some details.  What printer model? What operating system? 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I'm trying  to download the monthly subscription versions of photoshop and lightroom, but I keep getting a server error message?  Any thoughts?

    Hey, I'm trying to download photoshop and lightroom for the subscription of $10 a month. but can't seem to get on the page for it. I keep getting a server error message, yet when I click the button to check their server it says everything is working fine.  Any ideas?

    Steveclack please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve Error 207.

  • Following recent Firefox update, I keep getting the foillowing Java message -Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIWindowsRegKey.op

    Following recent Firefox update, I keep getting the following Java message each time I attempt to download a file, - Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIWindowsRegKey.op.
    Following a click on the off cross, it then allows the download to continue.
    When is AFG Safe Search to be fixed?

    please report this error to AVG, the 3rd party developer of the addon, in order for them to fix it...

  • Since installing OS 10.8 keep getting "This disk was not ejected properly" messages. Why?

    Since I installed Mountain Lion (OS 10.8) on my Mac Book Pro (early 2011), I keep getting "This disk was not ejected properly" messages. No yet sure what I do preceeding this occurence. Anyone else have this problem?

    I am one of those who had experienced this kind of problem.  My former Time Machine disk used to automatically eject itself when my iMac sleeps, hence upon waking up my iMac. i always get the error message that the disk was not properly ejected.
    From what I was able to gather from my experience, until the time that I found a workable solution, I think I can say that the problem is most probably caused by the incompatibility of certain external drives with how the iMac operates when on sleep and upon waking up.  Some external drives are just not able to cope with how the iMac tries to remount a connected disk after it wakes up from sleep.  There are just some external drives that cannot continue to be mounted after the iMac wakes from sleep.  There are just some external drives that are not responsive enough. In other words, the existence of the problem lies with the type of external drive you are using.
    My former Time Machine disk, the problematic one, was an Imation M300 Apollo 1 TB external disk.  It unmounts everytime my iMac went to sleep, but does not remount after waking up the iMac.  The disk will continue to be unmounted until I physically remove its USB connector and replug it in the iMac.
    I replaced my former Time Machine disk with my current one, a Transcend Storejet 1 TB.  And the problem went away.  The Transcend disk continue to be mounted after the iMac is woken up even from the longest of sleep.  I have even the energy saving option "put the hard disk to sleep..." checked.  The Transcend disk comes with a Y cable, i.e. it has two USB connectors, but I only connect the one for both data and power--and it still remains mounted even after waking the iMac from sleep.
    The sad realization, however, is that since there are only some external drives that are not able to work with the iMac, no matter how many those some may seem to be, it will be highly unlikely for Apple to itself fix this kind of a problem.
    I, therefore, make the following recommendations:
    1.  Check first if your problematic disk has a firmware upgrade available.  In some cases, the firmware upgrade may be enough to make the disk more responsive to the iMac waking up.
    2.  If there is no firmware upgrade available, check if your power/data USB cable is properly working.
    3.  If your power/data USB cable is in order, and the problem still persists, I think it is inevitable that you have to replace the problematic disk with a newer one that could respond well with the iMac's wake/sleep operation.  With what disk will you replace your problematic one?  I can only recommend from my personal experience the Transcend disk I mentioned earlier.  You may also search this forum on other brands of disks that may also work.
    Regards.

  • I have nothing on this macbook air just iPhoto and iTunes and the error startup dic full message keeps coming up and the storage is full of other i don't know what to do.

    i have nothing on this macbook air just iPhoto and iTunes and the error startup dic full message keeps coming up and the storage is full of other i don't know what to do.how do i delete all of this?

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
    You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

Maybe you are looking for

  • How do you move photos from one library to another in iPhoto 9.4.3

    I have half 2009 photos in one library and the other half in a different library.  I'd like to move several photos to one of the libraries to make a photo book.  How do I do this?

  • Is there a sensible way to import form fields from an old pdf into a new pdf?

    I'm working with Acrobat X Pro on a Windows PC platform.  I've been working with a file that was originally created in CorelDraw X3, in landscape orientation. That document was then saved as a pdf and set up with many form fields (it's an order form)

  • Dynamic Actions in Report Fields

    Hello, i am upgrading my apps with dyn. actions. so my question. I want to enable or disable Fields in my report based on the value of a field in my report. example report shows: checkbox_|__name__|__ value ____ X __|__Mark__| <enable field> ________

  • Using the Adobe Forms for printing through portal

    Hi All, I've got a problem with the fact that I do not know exactly how to use the Adobe Forms from the portal. I've got the Form Objects done (Interface & Form using SE80) and they work OK when testing the form. The Interface gathers all the datas e

  • Photos app/Camera/Screenshot not working

    Hello everyone, so the other day i installed iOS on my 32 Gb iPad 2, and in the middle of the update, it crashed, forcing me to go into recovery mode and restore the ipad from iTunes. Afterwards, had to restore my latest iCloud backup. Anyway, I real