I keep getting the annoying "Error Message -34"? Help?

I deleted so many files and removed a few programs from my computer, and i keep getting the error message -34 saying I don't have a enough disk space to download an episode of a tv show on itunes! I also tried upgrading to itunes 8.1 and restarting my computer: nothing. now what do i do?!

I have had problems with Sony disks. The most recommended here are Verbatim 8x DVD-R burned at 4x or even 2x (slower burn = better burn).
I also get consistent success with Fuji disks.
It doesn't matter that your disks are 16x, just burn them at a slower rate.
BTW, if your disks are '4.7GB' they a single layer.

Similar Messages

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

    I am trying to order a book with iphoto, I keep getting the same error message.
    " A network error occurred while processing your order, please check your network connection and try again"
    I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
    I have ordered two books a few months ago without any problems.
    Now I keep getting the same message either half way into
    the order or at the final hurdle after the images have been uploaded.
    Any ideas?
    My shared Network has been fine and that does'nt seem an issue.
    Help.

    Try again in a couple of hours - sometimes it is a temp condition
    LN

  • I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

    I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later."  and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

    Hello, constance132. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I could recommend when receiving error -50. 
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\
    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\
    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Cheers,
    Jason H. 

  • I am running Windows 7  and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

    I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I keep getting the following error message while sharing my iMovie to iDVD.  "Unable to prepare project for publishing"  error (-2125).

    I keep getting the following error message while sharing my iMovie to iDVD.  "Unable to prepare project for publishing"  error (-2125).  I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM.  Any ideas why?

    That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
    Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
    In the Share to Media Browser dialog box choose the Large Size.
    When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
    Create a new project and click on the Media button near the lower right hand side of the Project Window.
    Then click the Movies button in the Browser window just above that.
    Under the iMovie star icon you should see the name of the project you shared out from iMovie.
    Drag that into the project and burn the DVD.
    If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
    Bengt's tips for great DVDs

  • I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    Well... what IS the error message?
    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

    When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
    Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar."  I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
    Thank you

    See this link.
    Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

  • I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

    On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

    Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
    http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  • I have been trying to publish my podcast to iTunes with no success – I keep getting the following error message

    I have been trying to publish my podcast to iTunes with no success – I keep getting the following error message
    We could not complete your iTunes store request. You do not have enough access privileges for this operation. There was an error in the iTunes store. Please try again later.
    New to all this and would really appreciate some help.
    Thanks in advance
    PS: I should say that I have an ITunes account - I have full permissions over the website etc. I am using Powerpress plug in on a wordpress site.

    My guess would be that you've fallen over a glitch in the Store, in which case all you can do is wait a bit and try again, but it is only a guess. Without being able to look at your feed it's not possible to say whether there might be a problem there.

  • I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved.

    I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

    Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

    Hello Fellow iBook Authors!
    Today I received the same error that you all have been discussing.  I tried selecting the DRM
    and this did not work for me, though I'm glad it did for some.  Here's what I did as a work-around. . .
    Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v.  I added an image and extended the length or timing of the image to span the length of the audio file.  Then exported as an .mov.  I then opened QuickTime and opened the file and exported the file to iTunes. 
    You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file.  Does this make sense?  I hope this helps, at least in the short-term.
    Michael Williams

  • When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later

    When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later
    Can anyone help solve this problem?

    I've done a search on here and haven't found any solutions posted for it for windows computers. You could try posting in the iTunes For Windows forum and see if you get any suggestions in there (are you able to download other items from the store e.g. a free app ?) - I use a Mac, the only things that I could think of to suggest trying is see if you get the same error on a different iTunes library :
    creating and/or opening a different iTunes library : http://support.apple.com/kb/HT1589
    or using a different user account on your computer in case it's a problem with that user account.
    But you may want to try the iTunes For Windows forum first, apart from anything else you are likely to get better help for the above

  • Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

Maybe you are looking for

  • Import Interruption

    I am importing old VHS tapes into iMovie 6 through a DV-bridge set on analog-digital, through a Mac Mini (FireWire), and finally to an external hard drive (USB). I start the tapes playing and click "Import" on iMovie, and everything works fine for 19

  • No sound other than MIDI files

    it appears that only MIDI files will play on my system.  we have not updated anything in the last week and the sound just quit other than MIDI files.  we are running XP on a HP M7067c desk top. any help please!

  • How to install on a software raid with dmraid?

    In linux 2.4 the ATARAID kernel framework provided support for Fake Raid (software RAID assisted by the BIOS). For linux 2.6 the device-mapper framework can do, among other nice things like LVM and EVMS, the same kind of work as ATARAID in 2.4. While

  • Display text

    I am doing Interactive basic report. When i click some value in my report I am displaying graph for that particular line.ie I am capturing the values through sy-lilli.What my requirement is I want to display the captured values in the screen. In the

  • List of Values Displays a Dialogue Box

    Hi All, We are using 2007A PL30, whenever pressing Tab on a list of value field, system displays a dialogue box first like "The result of the 'List of' query contains more records than you defined in the general settings. Continue?" Yes or No. If Yes