I keep getting the "Bonjour has encountered a problem and needs to shut down." and I can't print anything. I've downloaded latest version and updates and nothing helps. I need my printer to work. Help!

I am getting this error message every time I turn on the computer. I have the Airport Extreme wireless router. This has been occuring for the last 2-3 months. I have been to the support page and downloaded current versions and updates. I don't think I have a firewall ( I have AVG virus protection). Also, the scanner part of my printer/scanner/copier has not worked since we installed the router. Help!

The modname is mDNSResponder
The modver is 2.0.4.0
2.0.4.0?
By way of experiment, try installing the latest version of iTunes for Windows:
http://www.apple.com/itunes/download/
That should update your mDNSResponder to version 2.0.5.0 ... with the newer Bonjour componentry in place, do you still get the error when switching on the PC?
If so, is the modver being shown now 2.0.5.0? Or is it still 2.0.4.0?

Similar Messages

  • I keep getting "Firefox.exe has encountered a problem and will have to close" messages when I'm on websites. How can I stop this happening?

    Whenthis message comes up you are taken out of the website and, if you've been, say arranging a booking, all the information you've put in disappears. What can I do?

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • Can't install iCloud control panel on vista? I keep getting the error "Installer encountered errors before control panel could be installed" Knowing what errors and where to start would help?!

    Can't install iCloud control panel on vista? I keep getting the error "Installer encountered errors before control panel could be installed" Knowing what errors and where to start would help?!

    Try this: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • I can't access Facebook. I keep getting the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete". I have cleared cache, cookies, history, offline storage. Nothing has worked.

    can't access Facebook. I keep getting the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete". I have cleared cache, cookies, history, offline storage. Nothing has worked.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Getting "adobe Reader has encountered a problem and needs to close

    On Windows XP service pack 3. Adobe Reader X
    Get "Adobe Reader has encountered a problem and needs to close." . I have uninstalled adibe and reinstalled it and problem came back within 2 weeks after working for a short time.

    Try the following:
    Uninstall Adobe Reader X
    Reboot your computer
    Delete directory C:\Program Files\Adobe\Reader 10.0
    Download the EXE or the MSI installer from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/ and execute e.g. either of the following files:
    AdbeRdr1010_en_US.exe
    AdbeRdr1010_en_US.msi
    Good luck!

  • I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C  Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime librar

    I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C  Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime library incorrectly. Please contact the appliction's support team for more information.
    2nd/ message: iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 1114)
    I have removed iTunes serveral time and tried to reinstall many times and get the same results noted above.
    Can anyone help me? Thank you. EFS1

    Hello DrJMDDC,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    1. Remove iTunes and related components from the Control Panel
    2. Verify iTunes and related components are completely uninstalled
    3. Reinstall iTunes and related components
    Best of luck,
    Mario

  • I'm trying to update itunes and keep getting the message"There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personal or package vendor"  Anyone know now to fix?

    I keep getting the message" There ais a problem with this windows Installer Package. A program required for this install to complete could not be run. Contact your support personnal or package vendor".  I get this whentrying to update itunes. 
    Does anyone have a idea how to fix this/
    Thanks

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I can't log on to itunes account. Keep getting the error: Connection Manager::invoke::Failed to find service connection url. What can I do?

    I can't log on to my itunes account. Keep getting the error: "Connection Manager::invoke::Failed to find service connection url". What can I do?

    Hi, Buster1932.
    I would recommend logging out of your account then logging back in.  If the issue persists, see the article below. 
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • The application has encountered a problem and needs to close

    I'm building an application on LV using TABs, FPGA DLLs and DLLs that comunicate with CAN, GPIB and PCI devices.
    The program apears to work properly but sometimes, and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close..."
    Sometimes the error apears when I'm trying to exit the program, some other times it crashes before that.
    I can't find the error because the program may work well for several hours and then crash or it crashes after 5 minutes of working with it.
    Any clues on what is going wrong?
    Regards,
    Daniel Coelho
    Daniel Coelho
    VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
    Controlar - Electronica Industrial e Sistemas, Lda
    Solved!
    Go to Solution.

    I'm still going through the example, but since the error ocours sporadicaly this could take some time to pinpoint the error.
    I was reviewing the code and I was wondering about some simple things, like:
    - I have to many local variables, could this be causing somekind of an error?
    - since I'm using DLLs on my code, are there a way to make sure that all DLLs are loaded and unloaded correctly?
    My program has a TAB with a simple TestStand user interface and when I change TABs I close the teststand ui; when I use that user interface I load and unload the same DLLs that I use on the other TABs, i. e., when using the UI I load all the DLLs that comunicate with the devices and when I change TABs I unload all the DLLs because on each separate TAB I can control those devices indicidually.
    It's a bit hard to explain but I think I managed
    Is there some truth on my questions? If so, what could I do?
    Daniel Coelho
    VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
    Controlar - Electronica Industrial e Sistemas, Lda

  • Adobe Reader 9.3 "The installation has encountered a problem"

    Adobe Reader says an upgrade to 9.3.1 is available.  The installation fails every time with the message "The installation has encountered a problem"  I'm running this on Windows 7, and my account has Admin privileges.  I don't see any info about this error online.  Any suggestions?
    Robert

    Try downloading the update from this link
    http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.1/misc/AdbeRdrUpd931_all_incr.msp; save it to disk, then close all browser windows and run the downloaded installer.

  • HT201210 I keep getting the error "there was a problem downloading the software for the iPhone.  The host is down?

    I keep getting the error "there was a problem downloading the software for the iPhone.  The host is down?

    Thanks so much for your reply.  In the meantime, everything else is working.  I called Apple support and they were very unhelpful, wanted to charge me for support on a phone I'm trying to get rid of to upgrade to the iPhone 5, but, I can't get rid of it until I synch it to my computer....  Any suggestions to see what's blocking it?

  • We have two iPad 2s and on one apps keep shutting down but on the other iPad the same app is fine. We have deleted the app, hard restarted and it still shuts down. How can we fix this?

    We have two iPad 2s and on one apps keep shutting down but on the other iPad the same app is fine. We have deleted the app, hard restarted and it still shuts down. How can we fix this?

    got the same problem. did the hard reset but to no avail. mine is ipad 2 16gb ios 7

  • I am trying to download latest version of Safari and Itunes, and I get an error message that my signature is invalid.

    I am trying to download latest version of Itunes and Safari, and I get an error message that my signature is invalid.  Help?

    I am trying to download latest version of Itunes and Safari, and I get an error message that my signature is invalid.  Help?

  • Keep getting the 'system has run out of application memory' window, what to do?

    I'm running a mid 2010 MacBook with 2.4 Ghz Intel Core 2 Duo processor and OS X 10.9.5. Every time I'm on Safari I get the 'System has run out of application memory' window and it asks you to quit out of programs you're not using.  The problem is sometimes the only things running are Safari and Finder.  It'll then freeze up programs and prevent web pages from loading or showing up.  I'm not quite sure what this means or how to go about fixing it.  Any help would be much appreciated.

    Hi Meghan,
    If you are seeing that alert that you are running out of application memory then I would take a look at using Activity Monitor to see how the memory is being used. If it looks normal usage to you, then you may want to upgrade the memory on your Mac. Take a look at the article below for more information. 
    OS X Mavericks: If your Mac runs slowly
    https://support.apple.com/kb/PH13895
    How to use Activity Monitor
    https://support.apple.com/en-us/HT201464
    Take it easy,
    -Norm G.

  • Getting "HPNetworkCommunicator.exe has encountered a problem an needs to close" message

    I have an HP Photosmart B210e, product number CN219A.    I am running Windows XP 32 bit and I am using a wireless connection to print. The problem is occuring on an HP Compaq 8510p laptop.
    I have been using the printer for several months and it has worked great but about a week ago, I started getting an error message.   The first time I try to use the printer after turning on the computer I get a message saying "HPNetworkCommunicator.exe has encountered a problem and needs to close".  I am unable to print from that point forward.  Documents that I attempt to print just sit in the qeue.  However, if I shut the computer down and restart it, the print jobs will print on their own as soon as the computer boots up.  But then if I try to print another document I get the same error message and am unable to print.  Once I get the error message I am unable to use the HP software to check ink levels or communicate with the printer in any way.
    I have attempted reinstalling the driver and software 2 times without any success.  I have run the HP print diagnostic utility and it tells me that "everything checks out okay with your printer" and asks me if I want to print a test page.  I try to print the test page and it is unable to print it.
    I have the printer installed on another computer running windows 7 and it still works great.
    Please let me know how I can fix this problem
    I am unaware of any changes made to my computer other than the automatic windows and Mcafee updates.

    I have exactly the same problems.  If you com up with an answer before I do please reply here. I'll do the same.

Maybe you are looking for

  • Forbid partial delivery of item, but allow partial delivery of sales order

    HI, have someone faced situation when it is required to allow partial delivery for sales order with restriction that item in sales order should be delivered fully. For example: SO has following items: Item1     MAT1     10 un Item2     MAT2     10 un

  • What's the solution about data persistence in BPM?

    In some cases,data of completed processes need to be stored and reused in some applications.But in current BPM,I can't find where the data is stored and applications can't find interfaces to acquire these data.For example,if I want to check last mont

  • SCOM 2012 - how to setup alerts for specific IT groups.

    Hello everyone - I have seen a few similar questions but never any specific answers. Our IT department is split up in teams.  We have a Database team - Exchange Team - SharePoint Team - Web Team and others. We currently run around 650 Servers for the

  • Bridge freezes online - works offline

    bridge freezes right after getting startet and remains in this stage but once I disconnect from the internet it does work perfectly - and freezes again as I connect to the internet (LR & PH are doing fine !! - PC, Win7) Does anyone know how to fix th

  • Unsynchronized data between ECC and BW

    Hi Experts, I have a table in ECC6 which data is supposed to move to BW. Everything is fine except some records from that table is not found in BW side even in the PSA table. Where should I check to find the root cause of this program? Thanks, Duy