I keep getting the colour wheel of death after upgrading to mountain lion

Hi,
I'm not sure if anyone else has had this problem but I recently upgraded my Early 2009 24" Imac to Mountain Lion and I keep getting 'The colour wheel of death' appearing.
It happens all the time and last about 20-30seconds, in this time the machine hangs. Then it stops and everything is fine. However, it happens every 10-15mins.
The machine is a work machine so this problem is very frustrating and very time consuming.
I've googled the issue and taken a look at a website www.thexlab.com who reference something called SBBOD.
I've done what they suggest and tried keeping an eye what applications might be the cause by looking at the activity monitor but its seems its the finder.
I've re-installed mountain lion with no joy.
I'd like to go back to Lion but not sure how!
Can anyone help either solve the problem or help me go back to Lion?
Frustrated live long mac user.

http://www.reedcorner.net/understanding-upgrade-nightmares/ (Thomas)
See if you have supported applications > http://www.roaringapps.com

Similar Messages

After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?

After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?

Augend wrote:
After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?
There have been a few threads about this. The feature seems to have gone missing in Mountain Lion even though the Help for Preview still mentions it.
I've filed a bug report on it.
Matt

My Mac is travelling extremely slow. Applications bounce for at least a minute before opening (if they open at all). Any time i click the mouse or start typing i intantly get the colour wheel. Help!!!

My Mac Daddy is running extremely super slow. It has been gradually getting slower over the last week or so but now it is ridiculous. Not just safari. Apps bounce for about a minute before opening (if they open at all) have had a "Application not responding" message when i right click on the icon. Every single time i click the mouse or begin to type i get the colour wheel. I have Mac Keeper and have runs scans, all okay and now mac keeper wont open at all. It even takes a couple of minutes to quit apps and even to shut down. HELP!!!

To build on you main question, i would take a look at this:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
If you still are not happy with performance then consider reinstalling Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

In Word I constantly get the spinning wheel of death. Tried force quite several times, did restart i`mac, waited for a day etc etc but problem remains, what to do next?, i my

In Word I constantly get the spinning wheel of death, wait a few seconds and then go again. I have tried force quit several times, restarting the IMac etc. Waited one day, nothing seems to work. What to try next?

Please post on Microsoft's Office for Mac Product Forums

I get the rainbow wheel of death literally every two minutes

I get the rainbow wheel of death so often. I wiped my hard drive clean two weeks ago to get rid of the problem. It was okay for about two days, now it's back and worse than ever. It takes me almost 10 minutes to open up a microsoft word document. I can't do any work on it when this happens.

Adequate Backups must be your top priority, as your Boot drive may be failing.
Next on the list is to buy a new drive and install your favorite version of Mac OS X on it. Once you are running from a dependable drive, you can use the full power of Mac OS X to debug any remaining problems (if any) and determine whether that old drive can be saved.

I keep getting the spinning wheel, and macbook pro seems to be slowing down. How do i fix this without buying software?

I keep getting the spinning wheel, and macbook pro seems to be slowing down. How do i fix this without buying software?

Go to system profiler and report back the amount of RAM that you have.
Make sure that you have at least 20% of your hard drive free.
Make sure you don't have a lot of items on your desktop as that can slow things down.
Quit applications that aren't responding or you aren't using and won't be using for a while.
~/Library/Caches Quit all applications and delete this folder. Do a regular delete then do a secure erase on all the items that won't delete.
If it only happens with a certain application (Safari for example)...
1. Quit the application (Safari)
2. Open ~/Library/Preferences and find the file for safari (com.apple.Safari.plist).
3. Put the file in the trash. Do NOT empty the trash yet. Open the application and make sure everything's ok. Now you can delete the file. In Mail if you trash the file, you will get rid or your setup.
Make sure that your dashboard doesn't have too many widgets and use Activity Monitor to see what it's using.
There are ways to disable if you want to.
Make sure that all of your software is up to date.
Repair permissions (it can't hurt)
Don't have a lot of login items.
Your internet browser shouldn't have a lot of extensions.
I hope this helps
Chris

HT1338 i keep getting the spinning wheel , why?

I keep getting the spinng wheel in Safari, startes as once in a while, now quite regularly.

Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the box next to " Remove saved names and passwords".
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Best.

Why do I keep getting the windows messenger error even after disabling it?

Hi,
I am trying to download the flash player 10 on my windows XP computer. I get the error(s) close "Internet Explorer" and close "Windows messenger" during download. I closed Internet Explorer ok, but still keep getting the Windows messenger error even after stopping it and disabling it. I also have IT on medium and firewall and antivirus disabled.
How do I fix this problem. Please help. I need a flash player for work...Thanks
Nitrowizard88

ok, Here is whats listed
flash10l.oxc active x control
flashinstall, log
flashutil10l_activex.dll
flashutil10l_activex.exe
genuist.exe
kb923789.inf
install.log
I think I am running IE7
32 bit..not sure on this...

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

After upgrading to Mountain Lion my deleted emails keep coming back. I cannot get rid of them.

After upgrading to Mountain Lion my deleted emails keep coming back. I cannot get rid of them.

Hello waybk,
Thank you for using Apple Support Communities.
For more information, take a look at:
Configuring Mail for your email account
http://support.apple.com/kb/ht1277
Check if Mail> Preferences>Accounts> and set the Mail to Delete from the Server
Have a nice day,
Mario

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search

My name now appears on the upper right hand corner of my display after upgrading to mountain lion.. is there a way to get rid of that?

my name now appears on the upper right hand corner of my display after upgrading to mountain lion.. is there a way to get rid of that?

In System Preferences > Users & Groups > Login Options (below the list) > click the padlock and authenticate > Uncheck Show fast user switching menu as: or you can change it to icon.

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

Hi after upgrading to mountain lion my mail rules keep disappearing this has only happened since i installed mountain lion.

Hi after upgrading to mountain lion my mail rules keep disappearing??? this has only happened since i installed mountain lion.

I had Mountain Lion on two Macs. Mail rules were set up on a third Mac running Lion. I migrated everything on the Lion Mac across to a new iMac running Mountain Lion so now I have Mail rules on a Mountain Lion Mac. At least I should have. Several times a day the rules disappear. I assume this is iCloud synching messing up. I keep re-entring the rules but they vanish again and I'm getting tired of the game.
Large chunk of my Safari bookmarks bar also disappear at random intervals. It seems that iCloud can handle two Mountain Lion Macs on the same Apple ID, but can't cope with three.

I keep getting the colour wheel of death after upgrading to mountain lion

Similar Messages

Maybe you are looking for