I keep getting the error message:

I keep getting the error message:
The MobileMe IMAP server “p01-imap.mail.me.com” is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable. If you continue, you might not be able to receive messages.
I am trying to set up my mac mail.  It used to work fine and all of a sudden it stopped working.  Any suggestions as to why I cant make it work?  I have tryed deleting the account and starting again but I continue to get this error message.  Any help would be greatly appreciated.
Best,
Andrew

Make sure all the settings, incoming and outgoing seervers and port numbers, are as this apple article.
http://support.apple.com/kb/HT4864
If they are you are one of many that have problems with the apple mac mail app where all of a sudden it just stops working.
If that is the case I suggest you try a different mail program.

Similar Messages

  • In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

    In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

    use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

  • Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

    Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly."  I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues.  I use this disk for my Time Machine backups.  This always seems to happen when the computer wakes from sleep, but not consistently.  The computer was asleep overnight and backed up as soon as it awakend this morning.  Two hours later I get the improper ejection message.  I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem.  This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

    I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
    http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
    I document how I discovered this in my blog post:
    http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

  • I'm running a Windows 7 and I keep getting the error message:Apple Mobile Device failed to start. How do I download iTunes to add music to my new Iphone 5 :c

    I just bought the new Iphone 5 and i cant get itunes to download, I keep getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start.Verify that you have sufficient privileges to start system services.
    I have no idea what that mean my iPhone connects to my computer and charges and i can import pictures it just iTunes that won't work.
    PLEASE I NEED HELP FROM ANYONE WHO KNOWS ANYTHING!!!!!!!!!!!!!!!!!!!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Can not update or restore my ipod touch, keep getting the error message 13019

    can not update or restore my ipod touch, keep getting the error message 13019

    Start here:
    iTunes: Error 13019 during sync

  • I can't open itunes on my HP laptop.  I keep getting the error message " You don't have the proper permissions to open this file".

    Hello-
    I can't open itunes on my HP laptop that uses Windows 7.  I keep getting the error message "you don't have the proper permissions to open this file".  I removed all Apple downloads and reinstalled itunes 10.6.3 windows 64-bit numerous times, but I still get the same error message. Please help.

    Just want to add that after hours of searching and following every different blog on this issue, iTunes/apple you have lost my vote. What a joke...!

  • Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working  you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

    trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working  you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
    I already Uninstalled and reinstalled the product and it still does not work.

    Hi,
    Try to uninstall the software again and you have to manually
    Delete the following folders:
    [Startup Disk]/Library/Application Support/Adobe/Adobe PCD
    [Startup Disk]/Library/Application Support/Adobe/caps
    [Startup Disk]/Library/Application Support/Adobe/backup
    [Startup Disk]/Library/Preferences/FLEXnet Publisher/
    [Startup Disk]/Library/Application Support/FLEXnet Publisher/
    Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
    After that try to run the cleaner tool as mentioned by kglad.
    Restart machine and then try to install again.
    *** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

  • I keep getting the error message "Missing PDFMaker files. Do you want to run the installer in repair mode"

    I keep getting the error message "Missing PDFMaker files  Do you want to run the installer in repair mode"when I try to convert a file into a pdf.  I have tried uninstalling then reinstalling but I continue to get the message.  I am able directly print file, but there are some errors in the pages, but some of them have font errors. Please advise.

    Hey Suzanne,
    Could you please let me know what Acrobat version are you using and what kind of file are you trying to convert to PDF.
    If you are using an MS Office application, then PDF Maker has to be an active plug-in for the PDF conversion.
    Have you tried using Print to PDF option from the File menu for the same?
    Please check and then let me know.
    Regards,
    Anubha

  • I'm trying to load my newspaper and I keep getting the error message Failed to Load Kiosk, I've done a restore but no joy - any ideas?

    I keep getting the error message Failed to load kiosk when trying to upload my copy of the Times, I have done a restore but that hasn't worked - any ideas how to get the kiosk back and functioning again? All software is up to date.
    many thanks

    Hello, anabelleho. 
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article that I would recommend going through when experiencing this issue.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    Jason H.

  • When trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

    when trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

    I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps.  I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps.  I updated the apps via iTunes and then synced again without an issue.
    iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

  • TS3212 when i try to download itunes i keep getting the error message " Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start

    when i try to download itunes i keep getting the error message " Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start. Verify that you have sufficient privileges to start system services. Can someone help?

    Hey craiglarkin,
    First, I would try following along with the steps in this link:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    If you end up having to remove and reinstall iTunes and AMDS, make sure to follow the steps closely, including the order in which you uninstall.
    Welcome to Apple Support Communities!
    Have a great day,
    Delgadoh

  • I recently downloaded the latest iTunes and now keep getting the error message "A required iTunes compnent is not installed. Please re-install iTunes (-42404).  I have re-installed 10x and still no luck.  iTunes will not sync with my iPad.  Can anyone hel

    I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed.  Please re-install iTunes (-42404)".
    Since this, my iPad will not sync, despite resetting it many times.
    I have downloaded and installed the new iTunes more than ten times with no luck.
    Please can anyone help!!!!!!!

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

    I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Have a new itouch. I'm having trouble downloading iTunes. I keep getting the error message: Apple Application software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTues again. Error 2.

    I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
    Lg

    Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
    tt2

  • I keep getting the error message apple sync notifier.exe entry point not found.  The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

    I keep getting the error message apple sync notifier.exe entry point not found.  The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

Maybe you are looking for

  • Bind variable problem in a procedure

    Hi, Is there any way I can pass a parameter in a procedure as we do in sql plus (for example where date = &date). I have a procedure that is somewhat similar to this... select (field 1, field2... from table1, table 2.... where .... and .. and v_fisca

  • Error code 11 when trying to open .indd file

    Im having a small issue opening certain .indd  files, they were working fine when i tried to view them earlier in the week. When i double clicked to open them today, i got a small box saying " configuration error, uninstall and reinstall and it shows

  • Customer aging logic

    Hi, There is an requirement where i need to generate report on aging.. ie.. amount unpaid by the customer to be identified on different aging 0-15 days 16-30 days 31-45 days 56-90 days so the output of the report show be like above on different again

  • How to create a oracle table in PLSQL Stored Procedure ?

    Gurus, Any one send the example link to me to create a oracle table through stored procedure ? Thanks. S

  • Execution of class_constructors in subclass

    hi all, i'm new to abap objects but the testing the code below puzzles me.  can anyone explain why if i execute WRITE b=>d, the sub class_constructor is not executed?  i would expect that after executing the super c-c, the sub c-c is next.  as expect