I keep getting the message "blocked plug in"

I keep getting the message "blocked plugin"

See: How to perform a "clean install" of Flash Player in Mac OS X

Similar Messages

I keep getting the message-blocked plug-in when trying to use Adobe Flash Player. A message also states that I don't has a up to date flash player but I know that I have the right version of Flash player.

I keep getting the message-blocked plug-in when trying to use Adobe Flash Player. A message also states that I don't have a up to date flash player but I know that I have the right version of Flash player.

Hello,
Safari, blocked plug-ins…
http://support.apple.com/kb/HT5271

I keep getting the message blocked plug-in. I have the latest flash player installed and am using Safari version 5.1.10. Can anyone please provide a simple explanatio and cure????

I keep getting the message blocked plug-in. I have the latest flash player installed and am using Safari version 5.1.10. Can anyone please provide a simple explanatio and cure????

First paragraph explains...
Adobe Flash Player updates available for OS X on December 12, 2014 - Apple Support
Feliz Nuevo Año
ÇÇÇ

How do we view videos on our Mac computer? We keep getting the message, "Blocked plug-in".

We have a Mac desktop computer. We suddenly can't watch videos. We keep getting the message, "Blocked plug-in". Please help.
Thank you

That is because Apple shut down Flash Player due to a security alert.
You need to download the latest version.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

I keep getting a message"blocked plug-in" when I go to GSN to play my games or to view any videos sent to my face book,what do I do?

I keep getting a message"blocked plug-in" when I go to GSN to play my games or to view any videos sent to my face book,what do I do?

You can download the latest Flash Player here: http://get.adobe.com/flashplayer

After uninstalling and downloading the latest Abobe Flash player, I can no lnger play youtube videos. I get the message "blocked plug-in". It works in Firefox, but not Safari.

After uninstalling and downloading the latest Abobe Flash player, I can no lnger play youtube videos. I get the message "blocked plug-in". It works in Firefox, but not Safari?

Frostbitblue,
in Safari’s Preferences, select its Security tab, and make sure that its “Internet plug-ins: Allow Plug-ins” checkbox is checked.

I have MacBook 10.68. Yesterday I downloaded the Apple version of Java which I must have to work remotely and now I get the message,"blocked plug in". Any thoughts? I cannot access website content any more

I have MacBook 10.68. Yesterday I downloaded the Apple version of Java for my system because my company requires it to work remotely but now I cannot access the content on various websites. I get the message, "blocked plug in". Any advice? Thank you.

Why do I get the message "blocked plug-in" whenI try to view videos now?

Why do I get "blocked plug-in" when I try to view a video now? How do i fix this?

This issue is not an Apple networking one. However, you may find the following Apple Support article helpful in resolving it.

HT5655 I just downloaded the lates version of flash and I am still getting the same Blocked Plug - in message. Any solutions to this issue?

I just downloaded the lates version of flash and I am still getting the same Blocked Plug - in message. Any solutions to this issue?

Quit and relaunch Safari and the new version should work.

I can't get on line when the message "Blocked plug-in" appears.

I can't get on-line when the message "Blocked plug-in" appears. How do I get rid of this?

If you actually can get online on some websites in Safari, but are unable to view the websites that depend upon the use of Adobe Flash Player, such as YouTube, then the problem is an outdated Adobe Flash Player version, and you need to update it.
, System Preferences, Other, Flash Player, Advanced, Updates, Check Now
(This screen shot is from OS X 10.8.5, so it might appear different than your OS X 10.6.8 screen, and a different release of the Flash Plugin might be installed.)

I am running windows 7. My itunes keep shutting down on me. I keep getting the message itunes has stopped working What can I do?

I keep getting the message itunes has stopped working. A problem has caused itunes to stop working correctly. What can be the cause?

Hello Main Event,
Thank you for using Apple Support Communities!
I found this article while researching iTunes quitting unexpectedly on Windows 7 and feel it will help to resolve the issue here.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
It starts with troubleshooting 3rd party plug ins, then moves on to account troubleshooting if needed.
Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.
Take care,
Sterling

Trying to remove an old version of I Tunes and keep getting the message "The folder path I Tunes contains an invalid character' . It won't let me go any further, have tried deleting/repairing the program but keep getting the same message?

trying to remove an old version of I tunes, but keep getting the message 'The folder path I Tunes contains an invalid character'
It won't let me go any further, have tried deleting/repairing but get the same message and am blocked from continuing?

Hi Barbara,
I had a similar problem recently and using the "more like this" feature I discovered an answer. To a problem posed by Holo7, who like myself was a newbie on this platform, b noir proposed a solution to Holo7's problem that also worked with my problem. It involves downloading a version of MS Windows Instal Cleanup and using it to completely remove all traces of the old version.
If you look at my problem (follow OldGit66) and the link to Holo7's problem then you will find b noir's answer which I think may help you. I am new around here so you might want to wait for one of the higher status correspondents.
Regards
John

I have been trying to access Bridge Base Online. When I try to access account the message "blocked plug-in" comes up. How do I fix this?

I have been trying to access Bridge Base Online. When I try to access the site, the message "blocked plug-in," comes up. How can I get rid of this message?
Prior to this, I have had no problems with the site.

Click on the "blocked plug-in" text and follow the instructions in the dialog box which appears.
(80724)

HT1645 I am trying to burn an imovie I made. I keep getting the message multiplex error. The imovie will not burn to a idvd.

I am trying to burn an imovie to a DVD. I keep getting the message multiplex error. I do not know what to do. Please, can anyone help me.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

HT1338 I am getting a message: Blocked Plug-In

I am getting a message: Blocked Plug-in and can't view items on Safari. How do I fix this?

Click the 'Blocked plug-in' text and follow the instructions in the dialog box which appears.
(79395)

I keep getting the message "blocked plug in"

Similar Messages

Maybe you are looking for