I keep getting the message " The server 192.168.1.1:80 requires a username and password. The server says: RE1000"?

Why am I getting this message and how can I fix it? I can't access any websites. What username and password an I supposed to put? I'm dumb with this stuff so please provide a simple explanation? Thanks.

Do you mean the password of the wifi network i'm connected to?

Similar Messages

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying. How can I fix this error so I can send emails.

The issue definitely sounds like your Outgoing/SMTP settings need to be changed. Simply set them to the proper settings for your provider as was suggested above.
I found this link for Knology: http://support.knology.net/content/email.setup.cfm
The SMTP settings can be edited on the iPad/iPhone by going to Settings--> Mail, Contacts, Calendars, edit the account having trouble, click the Account, then at the bottom is the SMTP server info, click on it to edit it further.
It should allow you to edit the primary smtp server and let you enter all the good stuff as you see in the Knology link above.
Some providers require you to register your account on their service like AT&T.

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do?

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.

Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…

I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???

I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???

Have either of you had any luck with this issue. It began happening to me today when I was trying to purchase music on iTunes. I have purchased music and games in the past and have had no problem. Any help would be appreciated.

How do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes? Once is enough and no checkbox exists to say "do not show this message.....".

When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."

Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

The server at Mac OS X Server Web Services requires a username and password

I am running SL Server 10.6.2, wiki works but when a person clicks an attached file in a wiki and then selects "open" they get a login popup with the notification The server at Mac OS X Server Web Services requires a username and password. It doesn't matter what they put into the login/pass it comes back. If they hit cancel then the document opens. If they click save then it saves with no issue. I can type in the admin login/pass of the server and it works. Does this mean the security settings to the location of the files is wrong? Any help is greatly appreciated!

By the way they are using Internet Explorer 7 when opening these documents.

Hi guys, I was presented with iPhone and then I rewrote the program, but right now, the ability to such a problem ..... want username and password

hi guys, I was presented with iPhone and then I rewrote the program, but right now, the ability to such a problem ..... want username and password

I don't understand. What "program" do you mean, and what do you mean by "rewrote"? If you mean that the iPhone has Activation Lock - that is, you restored the iPhone and now it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
http://support.apple.com/kb/PH2702
If you can't reach the previous owner or he/she is unwilling to cooperate, then the device is unusable by you.
Regards.

APEX is running. I'm at the login page. Now I can't remember my admin username and password

After hours upon hours of finding fixes to get Oracle Application Express running, I am now on the verge of finally getting the test environment setup. In the frustration, I have now forgotten my username and password that I had when I created the thing.
Help?
BTW, is my default workspace called "Internal?"

login with sys account over installation folder..
e.g C:\apex>sqlplus
connect:sys/xe@xe as sysdba
SQL:>@apxchpwd
You can reset ADMIN password(e.g Apex_4.2)

When asking for username and password the default username is wrong

I have had a look through all the posts here but I can't find anything that helps me. I don't want to actually change my username or reset my password. I know what they both are; however...
I have a recently had to replace my hard drive and now have a fresh install of Snow Leopard. When installing programs the typical enter username and password box pops up but the default username which is populated there is wrong. I have to change it every time before I enter my password. I don't know why this is happening all of a sudden.
For example my username is xxxxyyyy but it comes up as Xxxx Yyyy (note the space). If I enter my password without changing it it gives me an error. If I enter it correctly everything works fine.
This is more of an annoyance than anything. Where/how do I change the default username that is entered into that box.
Any help would be much appreciated.

I was able to change the default account login on my mac --
Go to System Preferences => System => Accounts & click on the lock to make changes.
Highlight the account you want to change & click on the Password tab on the right.
In the box that says Full Name type in your name the way you want it and hit enter.
Reboot you mac.
Your changed name should now be listed as default.
Rick

HT3728 how do i reset up my macbook username and password the computer has been cleaned out and reset to original factory settings

I just had my macbook pro cleaned out and restored to it's original facory settings. i cannot access set up assistant to configure my username and password for the computer. it does not recognize my old username and password and I can't find where to enter this information.

Unless you erased the drive then reinstalled Mavericks you will not see the Setup Assistant to configure your initial admin account. I have no idea just what you did. But to reset to factory state means you had to first install the version of OS X that came with the computer on the gray labeled DVDs. For your model that would have been a version of Leopard. If you have a Snow Leopard DVD then you can use that instead. The process is:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Once you have 10.6.8 running you can enter the App Store with your Apple ID and re-download Mavericks to upgrade to 10.9.2.

How do I connect to an SMTP server that requires a username and password?

Hi,
I am currently working on a project for university which requires me to send and receive email. I was until this week able to send mail no problem, but now the SMTP server has been upgraded so that each time a mail is sent it requires the username and password.
Ideally the connection should be made using TLS/SSL, and not use the Authenticator method. I want to pass the username and password directly if possible.
I've been trying to use the following but have been getting handshake, and other exceptions:
SMTPSSLTransport smtpSSLtransport = new SMTPSSLTransport(session,
                    new URLName("smtp", smtpHost, port, null-File,
                    "USERNAME", "PASSWORD"));
        smtpSSLtransport.setStartTLS(true);
        smtpSSLtransport.connect(new Socket(smtpHost, port));
        smtpSSLtransport.sendMessage(smtpMessage,                                                     message.getAllRecipients());
        smtpSSLtransport.close();Can anyone correct this piece of code for me or point me in the right direction of what classes and methods I should be using?
Many thanks in advance,
Gordon

I always wonder what misleads people to do things this way.
Was there some example you saw that suggested that instantiating
an SMTPSSLTransport was the correct approach? I hope not.
See the smtpsend.java demo program for how to use SMTP
authentication. If you need to use SSL, see the SSLNOTES.txt
file for hints on using the "smtps" protocol. smtpsend.java also
illustrates use of SSL, but you'll need to fix a bug in it to use the
correct property names ("mail.smtps.auth", etc.).

After I started using Airport Express, my HP LaserJet 5000 won't print. I get the message "Network host '192.168.0.4' is busy." How do I fix this?

After I started using Airport Express, I get the message " host '192.168.0.4' is busy" andmy HP [ethernet] printer no longer works.

OK, I found this thread which answered my question.
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

I keep getting a message stating my internet connection timed out when trying to sign in to the iTunes store.

When I attempt to log into the iTunes store, I get an error message stating that my internet connection has timed out. I am able to access the internet otherwise. I am running on my home WiFi network from AT&T. I've removed iTunes and reinstalled it several times with the same outcome. Is there anything that I may be over looking, such as internet speed, etc? I've also check my firewall and pop up blocker and the program is allowed.

i've been having trouble for the last couple weeks, and after spending HOURS trying every solution i could find, i still can't get the store to load, or for itunes to stop hanging my computer. however, through the process of elimination, i did figure out that i had a router that died. got that going now, just wish i could get the itunes store to work.

I keep getting the message " The server 192.168.1.1:80 requires a username and password. The server says: RE1000"?

Similar Messages

Maybe you are looking for