I keep getting The request timed out.(-1001) when I try to update

I am online, the network is working fine, it does this on every network I connect to, WTH?

If you are setting it up via USB try disabing the computer's antivirus and firewall.
Power off and then back on the router
Try when connect to another network if setting up via wifi

Similar Messages

  • I keep getting the error message 'error 9006' when i try to update my iphone and ipad with iOS 6.1.2 - HELP

    Can any one help me.
    I'm having an continued issue with my phone/ipad 2 and updating it.
    I've tried (unsuccessfully) 7 or 8 times to update my iphone 4s with the latest update (iOS 6.1.2) but it gets 30 minutes in to the update and then an error message comes up (error 9006) and it gives me no option but to click ok and it.
    I've tried using different USB cables, different ports in my laptop, even uninstalling I Tunes and reinstalling and starting again - nothing seems to work.
    I've contacted my network provider who's referred me to Apple but they are closed (I'll try again during business hours).
    I'm updating it on my laptop using an internet dongle (as i dont have WIFI - All updates have been done like this and i've never had a problem before) and I have windows 7 software..
    Is there anyone who's encountered the same issue?
    Any suggestions would be greatly appriciated?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?

    Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?

    I just reinstalled Fireworks CS4 and it seems to be back to normal. Thanks

  • Hi, I keep getting the following error code : U43M1D207 when I try to install the latest updates.

    Hi, I keep getting the following error code : U43M1D207 when I try to install the latest updates. Im trying to load the RAW conveyors for the Nikon D810 but so far pretty well frustrated.
    Any help would be greatly received.......
    Regards
    Apple

    Can you please try the solution suggested at error code U43M1D207 ?
    Thanks
    Andaleeb

  • Why do I keep getting "an unknown error has occurred" when I try to update or add an app?  I have plenty of memory left.  Suggeestions?

    Why do I keep getting this message "an unknown error has occurred" when I try to update or load an app.  The issue is not space (memory) as I have 2/3 memory left to use.  Any suggestions?

    Hi ...
    Installing the OS X Lion Update 10.7.3 (Client Combo) reinstalls the App Store for you which may help. Restart your Mac after the combo is installed.
    It's ok to do this even though you are already running v10.7.3.
    If that doesn't help, if you have anti virus software installed, disable that.
    If you have an app called LIttle Snitch installed, that can prevent apps from updating.

  • I keep getting Error Code 4002 in iTunes when I try to update my iTunes Match.  I have turned off iTunes Match, then reinstalled it, but that does not seem to work.  I also get another Error Code (4010) sometimes.  Can someone offer advice?

    I keep getting Error Code 4002 in iTuens when  try to update my iTunes Match.  I have turned off Match, then reconnected, but the code keeps coming.  So does Error Code 4010 at times.  Can someone help?

    iTunes store, App Store, iTunes Match and various other services have been down for the past several hours. Apple's System Status page at http://www.apple.com/support/systemstatus/ now shows them back up but they are STILL NOT up for me or many other users. The error codes 4000 series refer to connection errors, I've gotten several from 4001-4010 all day. We're kind of at the mercy of Apple at this point. It would be nice if they would give us some notification about their problems since we are paying for their service.

  • Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

    When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server".  Can someone please help me with this?
    TO be precise, it says "licensee server communication problem"
    Thank you

    The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
    Good luck.

  • Keep getting "cannot connect to iTunes" message when i try to update apps.

    Everytime i go into the app store and click "updates" i am getting the message from above. It is noit that im not connected to the internet because i am having no problem downloading apps and songs from iTunes. I have recently changed my apple I.D.  So i have reverted back to my old I.D. as someone suggested but still nothing. I was told my apple I.D. and password needed to be the same. as the ones i used to download them but i have changed my password and now cant change it back because it doesn't have enough characters in my old password

    This is Apple's starting point/troubleshooting web site for iTunes Store connection issues. It has links to more advanced troublehooting as well.
    Can't connect to iTunes Store
    Have you tried rebooting your router - unplug it for about 30 seconds and then plug it in again - or temporarily disabling your firewall or anti virus software?
    Restart or reset the iPad?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I get a connection timed out error when trying to connect to the itunes store, if I have pending downloads they show up and I can download, also I was able to access my account, yet I can't access other parts of the store, I am in greece on a macbook pro

    I am from the states and am in Greece on vacation.  I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store.  It is funny because pending downloads show up in the cue, and they download no problem.  I can also open my account.  When I try to go the the movies or music section of the stor though it just times out.  I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing.  Any help would be appreciated.
    Thanks

    Welcome to AD!
    There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
    Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
    Almost all of them have made deals with Symantec to pre-install it.
    Horrible, horrible software.
    Anyway, glad you finally solved your problem.

  • The request timed out

    Does anyone know why I get "The request timed out"  when I try to access the iBooks store?  If so, is there a solution?
    Thanks!

    You could try the 10.8.2 Combo download. Run the disk utility first before installing, verify your disk then repair permissions.
    Then try the Combo downoad http://support.apple.com/kb/DL1581

  • Publishing to YouTube Failed: The request timed out.

    Why do I get "Publishing to YouTube Failed: The request timed out." when trying to load to YouTube. It doesn't happen all the time, just once in a while but it's been happening everytime for the past week!!
    I am using the pre-set drop down feature - Share to YouTube.
    Help! Thanks.

    Just trying the upload from the desktop: 'Uploading your video. 2616 minutes remaining.'
    Am also doing another export using H264 to see if that is quicker. It's only 15mins of footage.

  • I have 2 i4 phones.  I can sign on to iCloud on 1 but never on the other.  Does anyone have the answer to this.  I have tried to change my password but I still have the same problem.  I keep getting message "Verification Failed The request timed out"

    I upgraded to 2 -  i4 phones with 2 different phone numbers.  I can sign on to iCloud on 1 phone but never on the other.  I have changed my my password twice but no matter what I do, I still have the same problem.  I keep getting a message "Verification Failed The request timed out"  no matter how many times I try to sign on it always times out.  Before I upgraded to the i4, I had a i3GS and had the same exact problem.  Does anyone have any ideas???

    Firstly, go to http://iforgot.apple.com and sign in with the ID you use for iCloud. A new password will be sent to your associated email address.
    If that doesn't work, for example because it's going to an address you can't access, then you will have to contact Support. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'.

  • IPhone/iPad connection error after first login ok: The request timed out. (-1001)

    Hi
    I have installed SAP 9.0 PL 12, DI API all version, Integration Component of the SAP 9.0 PL12.
    On my iPhone I have the 1.10.1 version of the app SAP.
    I followed the directions provided in the note (also in 1602674) and in the forum, but nothing.
    I start my PC (server with integration installed), do all the tests possible dall'integration admin and I always correct results.
    Start app from my iphone, it connects to my DB but.... after a few minutes I get the error
    "Connection Failed - The request timed out. (-1001)"
    and then throws me out of the db.
    If I try to reconnect, re-entering the password I have always the same error.
    To reconnect, I have to restart the PC and the situation repeats itself (is the first logon, then I get the error and I can not reconnect).
    Can anyone help me?
    THANKS
    NL

    H Thusar
    Update: I only changed the startup type of the service DI Proxy, Event, Integration, and instead of putting 'Automatic' I selected 'Automatic (Delayed Start)'.
    I rebooted the server and I was able to connect the iPhone via app to my DB: I was about an hour, I created BP, made ​​changes, displayed report.
    I then did the logoff.
    I tried to reconnect but nothing is returned the error 'Connection Failed - The request timed out. (-1001)'.
    Even after restarting the server again, the app connects after about two minutes I get the error 'Connection Failed - The request timed out. (-1001)' and is no longer relates only after you restart the server.
    Help
    NL

  • Trying to set up mail and iCloud in iPhone4.  It keeps saying verification failed. the request timed out. Not sure what to do,

    Trying to set up mail and iCloud in iPhone4.  It keeps saying verification failed. And the request timed out?  Not sure what to do.  I do have an iCloud account and am able to log on to it on computer and see mail, contacts, etc.  Any ideas?
    thanks for any help

    ausask64 wrote:
    Can't seem to get a connection to internet even thou it tells me i have one. 
    If you see the white WiFi bars in the upper left corner, that simply means that the iPad has detected a WiFi network, and that does not mean that you are connected to the Internet.
    Can you open web sites with Safari?

  • HT5622 I have a new iPad mini. trying to set up my iCloud. I have a wifi connection at a hotel. trying to connect to my iCloud account. Getting a message saying "Verification Failed" the request timed out.

    I have a new iPad mini. trying to set up my iCloud. I have a wifi connection at a hotel. trying to connect to my iCloud account. Getting a message saying "Verification Failed" the request timed out. Can't seem to get a connection to internet even thou it tells me i have one. 

    ausask64 wrote:
    Can't seem to get a connection to internet even thou it tells me i have one. 
    If you see the white WiFi bars in the upper left corner, that simply means that the iPad has detected a WiFi network, and that does not mean that you are connected to the Internet.
    Can you open web sites with Safari?

Maybe you are looking for

  • How to copy Value of fright from pricing procedure to the tax procedure

    Dear All, Please note, I have a condition type in Pricing procedure i.e. ZRCO-this is for fright which will be added by the user in the PO. I want to copy the same value to  ZRC1 which is a condition type in tax procedure. Kindly advise, is there any

  • Open a webpage with SMIL

    Is there any way to have QuickTime open a web page with SMIL at a given time, and not at the mouse click? With RealOne, the corresponding tag is <area href="http://www.example.com" begin="10s" external="true" actuate="onLoad" sourcePlaystate="pause"/

  • How to import .eml files to Mail.app?

    Hello, I've been trying to find a less tedious way to migrate from Gmail to iCloud. Trying to drag and drop (or simply move via mail.app options) results in errors. I've been able to move over about 10000 of my 60000 messages so far, but it's been a

  • IE displays differently than on browserlab

    A specific page oon a site I am building is not rendering correctly in EI, EI is not seeing the Javascripts mycarousel or lightbox. In browserlab the carousel is correct. Just wondering if there is some adjustment i need to make on my EI program for

  • Cash flow satement(Direct Method)..

    Hello guys, When my client is excuting cash flow statement(S_ALR_87012271 -(Direct Method) , they are getting message like "no records were selected". I Activated Cash Management OT29 (activate CM) and I selected the GL accounts relevant to Cash Flow