I keep getting the same error message:  "Runtime Error" for adobe reader

Hi,
I keep getting a 'Runtime Error' message stating the following:  "This application has requested the runtime to terminate it in an unusual way.  Please contact the applications server team for more information".  It then closes the attachment and shuts down the email program.  The email program that is being used is outlook express, I have tried removing Adobe and reinstalling it - with the same issue.  I have tried downloading earlier additions with the same issue.
Any advice in relation to this issue would be greatly appreciated.
Cheers,
Janet

You can go to control panel, add/delete programs and delete Quick time. Then download & install the stand alone version of Quicktime.
http://www.apple.com/quicktime/download/

Similar Messages

  • I keep getting the same junk messages and can't get rid of them permanently. Any suggestions?

    Please help - I keep getting the same junk messages and can't delete them permanently. Same thing happens in the Trash folder. Anyone have suggestions?

    Please help - I keep getting the same junk messages and can't delete them permanently. Same thing happens in the Trash folder. Anyone have suggestions?

  • Hi, Since updating to 10.7.2 I cannot make any changes to my web site. I just keep getting the same stupid message asking if I have an account even though I am already logged in. Any thoughts. Thanks

    Hi, Since updating to 10.7.2 I cannot make any changes to my web site. I just keep getting the same stupid message asking if I have an account even though I am already logged in. Any thoughts. Thanks

    Go and log out of your MobileMe account and then try logging back in again with a dummy username and password.  This can help clear it and then just log back in again with your normal username and password.
    Note though that iWeb does not require a password or username to use it - this is MobileMe.
    Also, start thinking about MobileMe alternatives before you are forced to in June.

  • Keep getting the same update message

    This is the message we keep getting:
    An update is required to use Folio Builder.  Please click here to download the Folio Producer tools.
    We have installed this update but Folio Builder still produces this message.

    Still struggling with this and quite frankly this is getting frustrating to the point where I'm losing confidence in Adobe Support.
    Spent hours today with them trying to uninstall, re-install, setup new user accounts, all to no avail.
    I followed the process they outlined to completely uninstall all Adobe Services, caches, and preferences (shown below). I did all this, and...
    1. Re-installed just InDesign CS6 from Adobe Creative Cloud Account Manager.
    2. Then went to Help -> Update, Installed DPS tools as instructed, and still got the "update is required" message shown above.
    3. I've clicked that link, exited InDesign, downloaded file from the New Downloads section...
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5377
    4. Ran patch file and completed update
    5. Restarted, opened InDesign. Still get greeted to that pesky "update is required" message when I try to launch Folio Builder.
    Is Adobe working on a fix for this? This can't just be affecting me.
    If anyone's interested, here is the complete uninstall process as outlined by Adobe from my as-yet-to-be-helpful customer support chats...
    Please make sure that you have the DVD or Download Link before performing the below steps.
    Please uninstall all adobe Softwares from the following location.
    Macintosh Hard Drive/Applications/Utilities/Adobe Installers and run the uninstaller of all adobe applications.
    Please go to following link for downloading the Cleaner tool and then run it.
    http://www.adobe.com/support/contact/cscleanertool.html
    Now restart the computer in your original account and delete all the below mentioned folders from following locations. If you don't find any adobe folder or the following folders then leave it and move to the next step.
    * means all the files and folders beginning with Adobe
    Applications/Adobe*
    /Applications/Utilities/Adobe*
    /Library/Application Support/Adobe*
    /Library/Application Support/FLEXnet Publisher/
    /Library/Preferences/com.adobe*
    /Library/Preferences/FLEXnet Publisher/
    /Users/[user]/Library/Application Support/Adobe*
    /Users/[user]/Library/Caches/Adobe*
    /Users/[user]/Library/Caches/com.adobe*
    /Users/[user]/Library/Preferences/Adobe*
    /Users/[user]/Library/Preferences/com.adobe*
    Please create a new Administrator account from the Apple Menu->System Preferences->Users&Accounts and name it Adobe or any convenient name.
    Please restart the computer, login with new account and install the product from the DVD, Desktop folder or Application manager.
    Restart the computer and then check the Software.

  • In mail, I keep getting the same "re-enter password" error msg even though the password in the mail accts is still there.  This started on day 15 of a 30-day trip and continued until i walked into my office at home and my own wi-fi network.  Fix?

    iPad2 -- In mail, how come i suddenly get password error msgs on day 15 of a 30 day trip (preventing me from using Mail) until i return on day 30 to my home wi-fi, when all of a sudden everthing is OK again?  How can i fix this when it happens again?

    Probably your email provider requires that email access be made from a point on their network. This would not be the case while you were traveling be would again be true when you returned.
    Check with your email provider (your ISP?)
    It would help if you identified who is providing your email service.

  • Keep getting the latest Firefox (3.6.6) update installation request. Each time I follow instructions exactly but I keep getting the same Firefox dialog box asking for 3.6.6 to be installed - from scratch. 6 times already...tiring...what's happening?

    A dialog from Firefox keeps popping up on my screening requesting that I update to 3.6.6...which I've done at least 6 starts ( yes, I restart Firefox)...
    Doesn't seem to stick...just got another dialog window requesting me to update...it's tiring...what's happening?
    == This happened ==
    A few times a week
    == over a week or 2 ago and several times since including today, Sat., July 17.

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    After closing Firefox, Remove the files in the ''updates'' and ''updates\0'' folder:
    C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\
    C:\Program Files\Mozilla Firefox\updates\
    (Replacing '''<user>''' with your Vista user name.)
    If that doesn't work, try downloading the Firefox installer from http://www.getfirefox.com and running it,
    after exiting Firefox.
    Your settings won't be lost with this upgrade install.

  • When my lightroom opens up I keep getting an error message that states, "Lightroom encountered an error whne reading from its preview  cache and needs to quit" I have relaunched it a number of times and keep getting the same message.

    when my lightroom opens up I keep getting an error message that states, "Lightroom encountered an error whne reading from its preview  cache and needs to quit" I have relaunched it a number of times and keep getting the same message. Any thoughts on how to fix this?

    You need to delete your preview cache and have Lightroom rebuild it.   Cache location can be found here.
    https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
    Why And How To Clear Your Lightroom Cache - Lightroom Fanatic

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

    I am trying to order a book with iphoto, I keep getting the same error message.
    " A network error occurred while processing your order, please check your network connection and try again"
    I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
    I have ordered two books a few months ago without any problems.
    Now I keep getting the same message either half way into
    the order or at the final hurdle after the images have been uploaded.
    Any ideas?
    My shared Network has been fine and that does'nt seem an issue.
    Help.

    Try again in a couple of hours - sometimes it is a temp condition
    LN

  • I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    Well... what IS the error message?
    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

    On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

    Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
    http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  • I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

    I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved.

    I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)"  I have tried many many times and keep getting the same message.  How do I resolve?

    When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)"  I have tried many many times and keep getting the same message.  How do I resolve?

    First take the steps recommended in this support article. If there's no change, continue as follows.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Cookies/com.apple.appstore.cookies
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I can't start Facetime. Keep getting a pop-up window saying that "an internal FaceTime error occured. There was a problem with FaceTime. You need to quit and open FaceTime again". I keep retrying to open and keep getting the same message over again.

    I can't start Facetime. Keep getting a pop-up window saying that "an internal FaceTime error occured. There was a problem with FaceTime.
    You need to quit and open FaceTime again". I keep retrying to open and keep getting the same message over again.

    @ reichard
    yeh man i have the same problem i think when i open the ****** facetime it dosent open there is a line in facetime icon it dosent open i dont know how it work **** i want it to work hope someone help me thx

  • Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

Maybe you are looking for

  • I am a newer about LabVIEW.How can I realize a remote control in a Web brower.

    "To transform your application into a remote laboratory, make sure the VI that you want to publish is loaded into LabVIEW memory. Next, select the Web Publishing Tool option from the Tools menu. This window is the main window for interactively creati

  • Building URL with parameters

    Hi, I have a webi report which I would like to schedule to run every night for different filters. I want my xcelsius dashboard to pick the latest instance of that report for that filter. How can this be done ? I have constructed the below URL http://

  • My new MacBook Pro will not read my OSX disk.

    So far everything has been working great on this computer until I reached this problem. Other CD's seem to be read just fine except for the CD's that came with my computer. Questions. 1. What can I do? Will Apple give me new ones for free? 2. Is ther

  • Need to Sync multiple images to multiple Audio markers

    Hi everyone ! I'm using Premiere Pro CS6 (and CC lately). I have a 30-minute audio clip in my timeline with around 200 Markers applied to it (manually entered by me at certain audio points, every 5-10 seconds or so apart roughly). I've also prepared

  • Why does Safari launch so slowly on my MacBook Pro?

    Safari on my MacBook Pro 2012 has been acting a little strange since I bought it. Launching the app takes quite some time (almost five or six bounces on the dock) on my Mac, but on display models in stores, Safari can launch instantly. I thought this