I keep getting this error message, installion aborted,all instelled componests were removed via the rollback feature when installing a downloaded game from POGO. What does this mean and how do I fix it?

I have downloaded games from POGO just fine but when i go to install them it will start and then say installion aborted,all instelled componests were removed via the rollback feature and i have no idea what this means or how i an fix it. This has never happened before and I am not sure on what do to

Yes, the website works fine on my PC computer.
It was working fine on my iPad too until the message showed up. The website took a long time to load and when it finally did.. That message showed up twice. The site works now but at times will stop loading.
I do feel like my Internet connection on my iPad is spotty today. One minute it is loading super fast, the next, the page won't load at all. Could be my connection though.
I do not have the debug console set to on. Should I set it to on?

Similar Messages

HT4759 I keep getting this message " the maximum number of free accounts have been activated on this iPad " what does that mean and how can I fix it

I keep getting this message " the maximum number of free accounts have been activated on this iPad " what does that mean and how can I fix it

It's a really bad idea to post your iPhone's serial number and I've asked the Hosts to remove it.
Any one device can create only three iCloud accounts. As you have apparently already created three accounts (or if it's a used phone the previous owner did) you cannot create any more one it. This is tied to the hardware, not the account, and there is no way round it.
You can create a new iCloud account on another iOS device or on a Mac, and then you will be able to sign into that on your iPhone.

I am trying to finalize a movie project and I get an "error in user parameter list" message. What does that mean, and how can I fix it?

I am trying to finalize a movie project and I get an "error in user parameter list" message. What does that mean, and how can I fix it?

what movie editing software are you using?

My canon MX700 screen says "error 5200" What does that mean and how do I fix it?

My Canon MX700 printer screen says "error 5200", what does taht mean and how do I fix it?

Hello ellenmarcris,
To try and resolve the 5200 error on your PIXMA MX700, please turn off printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the same error occurs, the printer will require servicing to resolve the issue. Please click on the Contact Us link below to obtain your servicing options,
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

When trying to save a document , it says syntax error-what does that mean and how do I fix it?

when trying to save a document that I typed, it says syntax error..what does that mean and how do I fix it so I can save my documents?

Applescript is like HTML, Actionscript, or Javascript.
SYNTAX is EVERYTHING.
Unlike HTML, Dreamweaver will pop a syntax error when trying to save a javascript that is unworkable because of a Syntax Error. Flash will do the same with a bad Actionscript.
AppleScript Editor is the same way as Dreamweaver or Flash.
The reason is:
Bad HTML - a browser simply won't load the page or it'll load it with missing or no content. Not all that bad.
Bad Javascript - your browser can lock up and if the script is complex enough, it can lock up your entire system.
Bad Actionscript - just like bad javascript, it can potentially lock your entire system.
Bad Applescript - can lock up your entire system.
With Windows, viruses are often improperly read as SYNTAX errors in Actionscript or Javascript. That's not a worry with an AppleScript, but the possibility of locking up your system is worth a warning.
You need to double check your syntax to be sure you haven't got something missing or improperly written.

HT1338 i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

I note this information from Wikipedia: "DVD Studio Pro was a high-end software tool published by Apple Inc. to allow users to create DVD masters to be sent out for replication at production houses. Its tight integration with other Apple applications allows users to take Final Cut Pro and Motion projects and render them into the DVD format without encoding to intermediary formats. This streamlines the production workflow and reduces overhead."
If that is your intent, finding a substitute program that will run on your Mac may not be as efficient. Others can advise you on alternatives, or you can post a new thread specifically with that question.
BTW: what Mac and what version of OS X?
If it is important to you to continue to use DVD Studio Pro, consider the option of installing Snow Leopard (with Rosetta) into Parallels on your Mac:
[click on image to enlarge]
Full Snow Leopard installation instructions are here.

When I try to send photos in email, it fails saying "rejected by the server." What does that mean and how do I fix it?

When I try to send photos or anymail, it fails saying...."rejected by the server."
What does that mean and how do I fix it?

Please see this article on setting up an email account using the shaw mail server.
https://community.shaw.ca/docs/DOC-2181
Good luck Friend.

When I try to sync my ipod it says it cannot be synced because "a duplicate file name was specified". What does that mean and how can I fix it??

When I try to sync my ipod it says it cannot be synced because "a duplicate file name was specified". What does that mean and how can I fix it??

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

I am being told that "Back to Mac" isn't working because NAT Port Mapping is turned off on my router. What does that mean and how do I fix it?

I am being told that "Back to Mac" isn't working because NAT Port Mapping is turned off on my router. What does that mean and how do I fix it?

AirPort Utility is in your Utilities folder:

I am getting a message that states "startup disk is almost full. What does that mean and how do I fix it?

I am getting a message that states "startup disk is full". What does this mean and how do I fix it?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

"The iPhone [iPhone name] could not be restored. An unknown error occurred. (-1)" what does that mean and how can I fix it?

Every time I try to update my 3g iPhone I get the same result and it ends in (-1). I tried researching to see if anyone else had this problem but nothing came up. What does the (-1) mean and how can I fix it?

Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Here's a link to the complete error code page:
Resolve iOS update and restore errors - Apple Support

Everytime I open a browser, I get a "not repsonding". What does that mean and how can I fix it?

Every time I open a browser, I get a "not responding" after the Mozilla Firefox heading. What does this mean and how can I fix it?

Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

What does it mean (and how do I fix) my light is solid amber?

I plugged my Time Capsule in, but the light stays amber - what does this mean and how can I fix it?

Normally on start up, the Time Capsule should flash green for a second, then display solid amber for 15-20 seconds and then...if the settings are correct....the light will turn to green. If there is a problem at this point,the amber light will normally blink slowly.
If the light stays solid amber, this indicates that the Time Capsule has "locked up" and may have possibly experienced an internal component failure.
Power down the Time Capsule for at least 15 minutes
Hold in the reset button and keep holding the reset button in for another 10 seconds as you plug the power back in to the Time Capsule
Release the reset button and see if Time Capsule will go through the normal start up sequence
If you get a slow blinking amber light after approximately 30 seconds, you can now reconfigure the Time Capsule again using AirPort Utility
If you try the factory default reset sequence above a few times and the light remains constant amber, I'm afraid that you'll need to take the Time Capsule to an Apple store to let them have a look.

"illegal seek", what does that mean and how do i fix it?

i keep on getting an error message on my mac that says "illegal seek", what does that mean?

Unsure where are you receiving this error message? What operating system are you using?

What does unknown0023121250f5 mean and how can I fix it?

When I open a terminal, I see 'unknown0023121250f5:'. What does this mean?

sudo scutil --set HostName whatever-you-want

I keep getting this error message, installion aborted,all instelled componests were removed via the rollback feature when installing a downloaded game from POGO. What does this mean and how do I fix it?

Similar Messages

Maybe you are looking for