I keep getting Unknown Error (-1) when I hook up my ipod touch to my Mac to upgrade the software.  HELP!

I have tried for the last several days to upgrade my ipod touch generation 2, from os 2.2.1 to 4.2 and I keep getting an unknown error (-1)
I have hit restore to original several times and nothing works and the error keeps coming up.  I have unplugged all USB products (which is only my mouse) while trying the upgrade and again, nothing works to upgrade the operating system.
I want to install Apps to this ipod and can not without getting the current os system 4.2
HELP!
This is very frustrating as you can all imagine.  And from all the websearching I have done, no one else has had this error.  Would my canon software have any conflict with the upgrading of this ipod?  I have not uninstalled the canon software but would if it would fix the problem.  I used to get "no camera attached" when I hooked up the ipod to the machine, and have that now fixed.
Any help is greatly appreciated.
Thank you all.

Thank you for the suggestion.  I have read the "more like this" feed on the right hand side and tried what people have suggested and no luck in upgrading.
Any other suggestions?

Similar Messages

  • I keep getting unknown error Ox80092013 when I try to log in to itunes

    I keep getting unknown error Ox80092013 when I try to log in via desktop (MS Windows).  Since this started, I can't sync my ipod, iphone, or ipad.  How do i fix this?

    Hi, ddstomoff. 
    Normally this error means a secure connection to the iTunes Store has failed.  Try the steps in the article below as it may help resolve this issue. 
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    If the issue persists, further troubleshooting may need to be processed.  Be sure to disable any security software installed during troubleshooting.  Also, test the results after every troubleshooting step processed. 
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Regards,
    Jason H. 

  • HT201210 I keep getting unknown error 3 when trying to restore my Iphone.  On line and chat support won't accept my request as I can't open my phone to get the serial number

    this evening has been torturous My phone said I needed to restore thru Itunes/support
    I tried and keep getting UNKNOWN Error 3
    I tried to get support but I can't open my phone to get the serial number.
    Now WHAT????

    I was doing some research on this problem for a friend and came across your post and thought I should share this:
    https://discussions.apple.com/thread/5372052?start=30&tstart=0
    Hopefully it helps, good luck.

  • I keep getting an error message when I try to sync my ipad or iphone to my iMac:  "The iPad (or iPhone) cannot be synced.  An unknown error occurred (-50)."  What is this about?  Thanks

    I keep getting an error message when I try to sync my iPad or iPhone to my iMac, as follows:  The iPad "_________" cannot be synced.  An unknonw error occurred (-50).  Does anyone know what this is about - thanks.

    Error -50 is a very unhelpful generic communications error with a number of possible causes.  Something between the drive to which you are downloading and the drive from which it is all coming is not working correctly, which probably leaves several hundred options.

  • I keep getting an error -54 when attempting to back up and restore. How do I correct the issue?

    I keep getting an error -54 when attempting to back up my 4S and restore to my new 5S. How do I correct the issue?

    Can you try again with Firefox 4.0b8 (desktop) and 4.0b3 (Android)? We have changed the way that Sync setup works, and it no longer requires entering the password and sync key by hand.
    For details, see: http://blog.mozilla.com/services/2010/12/22/easy-setup-for-firefox-sync/

  • Keep getting unknown error 0xE000084 when i try to connet my iphone 4s to itunes

    At a loose end now, bought a brand new iphone 4s and when i connect it to the computer it is not being picked up neither is itunes recognising it and I get error message 0xE000084. I have the latest version of itunes...latest version of ios6 and i have installed the drivers for the phone to work on the computer.
    Any help would be greatly apreciated.

    Hi
    I just tried Mirandas advice and it totally worked. I didn't know how to stop the service so I checked that up. Here is the steps:
    http://support.apple.com/kb/ts1567
    Windows Vista or Windows 7
    1 Close iTunes and disconnect the iPhone, iPad, or iPod touch.
    2 Click the Windows Start button  Start button.
    3 In the Start Search field type Services.
    4 In the Programs section of the search results, Click "Services".
    5 Select Apple Mobile Device and click Stop the service as shown below:
    6 After the service has stopped, click Start the service.
    7 After the Apple Mobile Device service has started again, open iTunes and connect the device.
    Thanks Miranda.

  • HT201210 am getting an ''unknown error (1)'' when trying to restore my iPod touch, what is the solution

    I restored my ipod touch (old version, silver back cover) but after erasing all the memory in it, Itunes showed me an error message ......The Ipod ''Ipod'' could not be restored. An unknown error occured (1)....What is the problem or how can I resolve this error?? please assist!!

    This usually indicates a hardware problem.
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • I keep getting an error message when I try to print. I have tried ctrl/p, and the print command in my email both give me the same error message

    It has been for a month or 2 that I have not been able to print anything in my Firefox browser (It used to work just fine). I have no problem at all printing in Chrome ( I never use Internet Explorer ). Is it possible that my new printer is the problem? I had an HP now I have an Epson. That is the only change I have made that I am aware of.
    A few weeks ago I had to print out an email, but the only way I could get it printed was to take a screen shot and paste it in a program that would print it.
    The error message I get is: Printer Error An error occurred while printing.

    See this - https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox
    Specifically see this paragraph - [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?esab=a&s=reset+printer&r=5&as=s#w_reset-all-firefox-printer-settings Reset all Firefox printer settings]

  • I keep getting an error message when i open itunes that says R6025-pure virtual function call can someone please help

    please help me

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Gets unknown error -124 when syncing the iPod

    I get unknown error -124 when syncing my 80 gb iPod. I have had files which I could not copy to the iPod, so I removed them. So it's not that. And I have restored it back to its original settings before syncing now.
    Any tips on how to resolve this?
    Thanks!

    i am getting the same problem and the people at best buy could not even help me they it was my problem. and i bought two new hard drives and it still does it.

  • I keep getting an error message when I try to sync my iPhone 5 to my Mac in iTunes.  It says "The iphone cannot be synced.  An unknown error occurred (1723).

    I keep getting an error message when I try to sync my iPhone 5 to my Mac in iTunes.  It says "The iphone cannot be synced.  An unknown error occurred (1723).

    Hello Chad176
    If you are constantly Authorizing your Apple ID, the article below will assist with getting that resolved for you.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I keep getting unknown error when trying to download apps

    Does anyone know why I keep getting unknown error when trying to download apps?

    does it says anything else than unknow error?
    try going to settings>store, click on apple id and then sign out. Restart iphone and sign back in and try downloading again

  • TS1436 I keep getting unknown error occured(4450) when trying to burn a CD...running Windows Vista, any help would be appreciated

    I keep getting unknown error occured(4450) when trying to burn a CD, running Windows Vista...any help would be apprciated.

    I had this issue to when trying to burn discs recently. I went into the CD creation settings in iTunes and I "unchecked" the option to "Include CD Text" and after I did that, the disc I had been trying to burn several times with error, actually burned without fail. Give that a try and see what happens.

  • Why do i keep getting an error message when i go to the itunes store

    I keep getting an error code when I try to go to the itunes store. The code reads "we could not complete your itunes store request. An unknown error occurred(0x800B0101)" and "There was and error in the itunes store. Please try again later.
    Can someone please help with this? It's been going on for several days.

    Please try downloading from the direct downoad links povided at : http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
    But make sure you follow the important instructions menioned on the page before initiating the download.

  • I keep getting "Unknown Error while saving"

    I keep getting "Unknown Error while saving"
    Using APE-11 on Windows 7- This error is a first for me, after many years of using Premiere. The product is a mix of photos (jpg and png), video clips (mpg-2 and mp4), and audio clips (all mp3). When I try to publish as Standard DVD- MPEG-2. I get the error. Error repeats saving as MP4.  Error gives no location on the timeline where it is running into an obstacle to saving, so I do not know where to begin looking to remove repair or replace the item causing the 'unknown error'. The prel runs fine, start to finish, giving no indication that the save may run into a problem on final rendering.
    I have tried many different options like rendering the entire timeline prior to saving, converting the clips to all be the same format, with no resolution to the problem.
    I have worked many long hours for many weeks on this project, and I am not going to give it up, especially when the majority of the clips were created on APE in the first place, and the images are all Photoshop edited images
    HELP PLEASE!!
    DougN

    Screenshot of error message for above issue
    Also: Since first report, I have attempted render with all sound clips removed (easiest to to with hundreds of clips/photos), with no help. Same error appears.
    I will continue removing aspects of the project until I get a completed save, or until I get an answer here!
    After removing the sound and video clips, video saved ok, with blank spots where the missing video clips were. So I reopened the original prel file, and began checking them individually.
    When I checked the clip properties, it correctly identified the path to the source video, but when I asked it to 'reveal in project', I got this error
    So I assume this is where the SAVE error is happening, but as I am not an Adobe coder, I have no idea what it is telling me.
    I did check to insure that the source video from which this clip originates, is in the project assets. I checked all the other clips as well, and any clip from this source video, generates the same error.
    The source video runs fine on its own and is an mpeg-2 file.
    Properties of the source video are:

Maybe you are looking for

  • OUI-25023 Error when trying to upgrade 10.1.0.3 CRS to 10.2.0.1 Clusterware

    Hi all, I'm trying to upgrade my RAC installation. To test and validate the procedure, i'm first trying it on a one node cluster (node named camrdo01) running on 10.1.0.3 (CRS & Database). When i'm lauching OUI for the Clusterware 10.2.0.1 installati

  • Problem to assign specific skin for sorted af:column

    Hi, Jdev 11.1.1.2.0 Doc http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e15862/toc.htm says: af|column::column-header-cell-content Styles the content in a header cell. Available pseudo-classes are :sorted (when the column has been sorted).

  • I can't import Sony Alpha 5100 raw format files

    Hello experts, I tried to import raw format files from SONY Alpha 5100 (ILCE-5100) but never worked while it did when I tried with Alpha 5000. I checked with SONY customer support and was told that RAW format is exactly the same between 5000 and 5100

  • Ichat crashes when I try to use the camera?  Why?

    Hello, I am a new mac user and I am figuring things out opretty well but when I use Ichat it works fine texting or audio but as soon as I cliclk the camera the green light comes on and then I get the pin wheel of death and then ichat closes. It even

  • OpenSPARC T2 package 1.2, linux: problem with simv linking

    Dear all, I'm experiencing a problem with the package OpenSPARC T2 v. 1.2. When running the sims and regressions everything seems to goes fine, but the simv is not created and the regression tests not executed. I'm getting error when link is searchin