I keep loosing blue tooth connection resulting in mac mini freezing.

I keep loosing blue tooth connection resulting in mac mini freezing.  I am using an apple wireless keyboard and mouse.  This did not happen until i upgraded to mountain lion. your thoughts
I leave the system on with Itunes loaded so I can use it for my media center with my Apple TV's
I use Super Duper every night at 2am for back as well as time machine.
I have the newest mac mini
2.3 Ghz Intel i5
8 gb of ram
i have 3 WD 2TB Hard drive connected (2) USB (1) Firewire
Also a Plextor blueray drive
Hooked to a Apple HD Monitor
Please Help.
I have been in tech support many times.  I also brought it into my local Apple store. 
Frustrated .
I spent a lot of $$ to make this set up happen
Please help.
Scott Southard
[email protected]

Did you ever find a resolutution to your issue? I have a similar issue after installing Mavericks where the Arris modem goes to sleep when my iMac does, even though other devices on the network are actively requesting data. For the time being, as long as the iMac doesn't sleep the network is fine.

Similar Messages

  • Blue tooth connect with my mac

    how do i connect to my mac with my i phone thru bluetooth

    You don't.
    This is not a feature of iphone, unless your wireless provider offers tethering and you are subscribed to the plan.  Then you can use bluetooth for tethering purposes only.
    Bluetooth supports stereo headset/speakers, handsfree telephone devices/headsets, some peer-to-peer apps, and tethering where provided by the carrier.
    Other than this, it will not connect to a computer/phone device.

  • Phone turns off blue tooth connection after 30 seconds into the call (when screen goes to sleep)

    Installed 2.2, paired my fascinate with my plantronics explore 240 headset, accessed voice dial (which worked), connected my call, after thirty (30) seconds the blue tooth connection dropped, picked up the phone and continued the conversation.  Just turning on bluetooth and leaving the phone sit for 5+ minutes keeping the screen active the blue tooth does not turn off, let the screen go to sleep and the blue tooth turns off.
    I can not maintain a blue tooth connection when the screen goes to sleep, not even during a call.  Is there a setting I am missing to keep this from happening or ... An alternative?
    Any help would be appreciated

    Hi. 
    The Bluetooth should not disconnect when your screen goes to sleep.  Have you tried re-pairing the Bluetooth since the upgrade?  Below I have provided you with the steps to pair the Bluetooth again.  (Please make sure both devices are fully charged when doing so.)
    Step 1 - Enable Bluetooth functionality on the Samsung Fascinate.
    Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
    From the main screen, tap Menu.
    Tap Settings
    Tap Wireless & Networks
    Tap Bluetooth to turn on Bluetooth
    Step 2 - Put your fully charged Bluetooth headset into pairing mode.
    Start with your Bluetooth accessory powered off.
    Press and hold the Call Control Button until the light indicator flashes blue and red. 
    Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset.
    Step 3 - Pair the Samsung Fascinate with a Bluetooth Accessory.
    Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
    From the main screen, tap Menu
    Tap Settings
    Tap Wireless & Networks
    Tap Bluetooth Settings
    Place accessory in pairing mode, see accessory pairing instructions.
    Tap Scan for Devices, device starts Searching.
    Tap [Plantronics Bluetooth] to pair
    Pairing Complete, touch home to exit.
    If you still need assistance, please send me a Private Message and I will be happy to help you.
    Thanks,

  • My iPad keeps loosing the internet connection. All of my other devices work. Last time this happened, comcast charged $49 to fix it. They said that it's somethin that I downloaded. How can I get back my internet connection on my iPad ?

    My iPad keeps loosing the internet connection. Last time this happened comcast charged $49 to fix it. They said that the problem was perhaps caused by something that I down loaded. All my other devices still connected to internet. Tried to reset my settings. Still won't work. Any advice ?

    First, changing your DNS settings could not possibly have any effect on this problem.
    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

  • Why do i keep loosing my wifi connection?

    why do i keep loosing my wifi connection?

    Did you already try the provided tips in this article about troubleshooting Wi-Fi connections? http://support.apple.com/kb/TS1398

  • Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Hi,
    I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
    I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
    Hope it helped!

  • What is the dial number for blue tooth connection ...

    Hi,
    I can't seem to find out what the dial up number is for my blue tooth connection. I assumed it was my mobile mnumber but when i try this it says (on the mobile) that there is an error with connection.
    I have tried calling the suport line but don't get though to any so end up hanging up.
    Thanks,
    Bar

    have no idea on that but try 0000
    Nokia N95
    V 20.0.015
    0546553

  • HT201250 WE KEEP LOOSING THE WIFI CONNECTION WHILE STREAMING TO VIDIO-HELP

    Why do i keep loosing the wifi connection while streaming to vidio- help

    Did you ever find a resolutution to your issue? I have a similar issue after installing Mavericks where the Arris modem goes to sleep when my iMac does, even though other devices on the network are actively requesting data. For the time being, as long as the iMac doesn't sleep the network is fine.

  • The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't work.  All software is updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

  • When my MyBook external drive (where I keep my music) is connected to my Mac, iTunes stops responding upon startup. I have to force quit iTunes, disconnect the iBook, restart iTunes and plug the iBook back in.

    When my MyBook external drive (where I keep my music) is connected to my Mac, iTunes stops responding upon startup. I have to force quit iTunes, disconnect the iBook, restart iTunes and plug the iBook back in.

    mattbeardall wrote:
    Is there an option that someone knows about that would keep this from happening?
    no, if iTunes can't find its drive/folder, it defaults to creating one within your Home directory's Music folder.
    If anyone knows a way I send a product suggestions to apple please let me know, as I have a few that would like to suggest.
    under the iTunes menu choose the Feedback menuItem.

  • Please help. Can no longer connect to my Mac Mini Server

    Up until two days ago, my iMacs were connecting to my Mac Mini Server normally. All of a sudden I could no longer transfer files without being prompted to type my password. Enter password and nothing happened, then got an error message stating that I don't have permission to do that. Now, a day later, no acces to my server. Has anyone ever experienced this? Can anyone please help? I've read the Mac mini booklet but doesn't have any troubleshooting info. Thanks in advance.

    Hello MrHoffman,
    Thank you for the advice. I went into Terminal first and typed in your command and this is what resulted:
    Last login: Fri Jan 24 22:39:08 on ttys000
    serverX:~ serverx$ sudo changeip -checkhostname
    Password:
    Sorry, try again.
    Password:
    Sorry, try again.
    Password:
    Primary address     = 192.168.1.7
    Current HostName    = serverX.private
    The DNS hostname is not available, please repair DNS and re-run this tool.
    dirserv:success = "success"
    serverX:~ serverx$
    serverX:~ serverx$
    I'm not very experienced with programming or coding, but this message seems to indicate that there's a problem with DNS just like you noted. I've highlighted the note in bold...What can you make of this or the logs from console below?
    Below is what I found in Console:
    1/24/14 8:55:08 AM          com.apple.launchd[1]          *** launchd[1] has started up. ***
    1/24/14 8:55:19 AM          com.apple.launchd[1]          (com.apple.NotificationServer[73]) Suspicious setup: User "jabber" maps to user: _jabber
    1/24/14 8:55:25 AM          edu.mit.Kerberos.kadmind[58]          kadmind: starting...
    1/24/14 8:55:27 AM          org.jabber.jabberd[53]          ERROR: Could not create /var/run/jabberd: Permission denied
    1/24/14 8:55:27 AM          com.apple.launchd[1]          (org.jabber.jabberd[53]) Exited with exit code: 1
    1/24/14 8:55:27 AM          com.apple.launchd[1]          (org.jabber.jabberd) Throttling respawn: Will start in 1 seconds
    1/24/14 8:55:28 AM          org.jabber.jabberd[130]          ERROR: Could not create /var/run/jabberd: Permission denied
    1/24/14 8:55:28 AM          com.apple.launchd[1]          (org.jabber.jabberd[130]) Exited with exit code: 1
    1/24/14 8:55:28 AM          com.apple.launchd[1]          (org.jabber.jabberd) Throttling respawn: Will start in 10 seconds
    1/24/14 8:55:28 AM          com.apple.printservice_LPR_mDNS_Plotter_Epson_7600[70]          Registering Service Plotter Epson 7600._printer._tcp port 515 TXT txtvers=1 qtotal=1 rp=Plotter_Epson_7600 pdl=application/postscript ty=\(null\)
    1/24/14 8:55:28 AM          com.apple.printservice_LPR_mDNS_Plotter_Epson_7600[70]           8:55:28.703  Got a reply for service Plotter Epson 7600._printer._tcp.local.: Name now registered and active
    1/24/14 8:55:30 AM          org.jabber.proxy65[52]          /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
    1/24/14 8:55:30 AM          org.jabber.proxy65[52]            import os, md5, sys
    1/24/14 8:55:30 AM          org.jabber.proxy65[52]          /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
    1/24/14 8:55:34 AM          com.apple.launchd.peruser.501[174]          (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/24/14 8:55:35 AM          ServerScanner[200]          Preference says we shouldn't scan
    Thanks!

  • Internet connection sharing between Mac Mini and Imac G3- how?

    Ok, I'm trying to connect my G3 Imac (running 10.4.8) to my Mac Mini (also running 10.4.8) but it just wont work.
    I've turned Internet Connection sharing on on my Mac Mini, and set it to share the airport connection to computers connected using Built in ethernet.
    Network (on the M Mini) shows
    Built-In Ethernet is currently active. Built-In Ethernet has a self assigned IP address and may not be able to connect to the Internet.
    Network (on the G3) shows
    Built-In Ethernet is currently active and has the IP address 192.168.2.7. You are connected to the Internet via Built-In Ethernet.
    When i try to go to a webpage on the G3 it fails stating, 'You are not connected to the Internet'.
    I'm using a standard straight through ethernet cable, as I was told a while ago from apple support that it doesn't matter which u use, straight through or crossover.
    Any help would be really appreciated
    Macbook 2.0Ghz 2GB 80GB/Mac Mini 1.42Ghz 1GB 80GB/Imac G3 450Mhz 640MB 80GB   Mac OS X (10.4.8)  

    OK after some playing about I can now manage to connect to the mac mini and vice versa to share files.
    The iMac G3 now says it has an IP address of 192.168.2.18, and that it's connected to the internet via built-in ethernet. I've set configure IPV4 to Using DHCP.
    Except it's not connected to the net.
    If i select Using DHCP on the Mini it doesn't obtain an IP address, not even a self set one. So i've set a manual IP address on that, and everything shows up green. Airpot connected to the internet and Ethernet has an IP address of 192.168.2.30.
    After reading some forums I set up firewall logging. The result is what happens on the Mac Mini when I use network diagnostics on the G3:
    Feb 11 16:43:52 richard-xxxxx-mac-mini natd[394]: failed to write packet back (Host is down)
    So I opened port 394 (not really knowing what i'm trying) but it had no effect.

  • Often no connection to my mac mini

    the connection between my mac mini and my apple tv  2 is no ok. often ther is an interrupted connection. between iphone 4 and ipad the connection is ok.
    why??
    thank you for your help
    cnwug

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

    I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

    Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
    As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
    Did you use any third party software to move your Firefox data from internal memory to the storage card?

  • Can airport extreme connect using a mac mini.  the base station is not recognized so i cannot configure it manually

    can airport extreme connect using a mac mini.  this airport extreme wont connect to internet via my cable modem.  I cant set it to bridge mode because it doesnt appear as a base station in airport utitlity...help

    First, is your AirPort Extreme Base Station (AEBS) a 802.11n, 802.11g, or 802.11b model? Second, what is your primary goal for using this base station? Finally, is the AEBS the only router in your current network configuration?

Maybe you are looking for

  • Adobe Acrobat Reader for IPad2

    Please help me because I'm going nuts. Government Canada keeps asking that I upgrade to latest Version of Adobe and will not let me print forms or fill online forms. I've reloaded latest IPad app yet get the same message. Has the newest version of Ad

  • Nokia E71 Questions - 3G and GPS - URGENT PLEASE R...

    Hi everyone! Hope you are doing well. I am a big noobie when it comes to phone services. I am planning to buy an unlocked Nokia E71. My service provider is AT&T. I am currently using a Sony Ericsson w580i and I use the MediaNet data plan. However, I

  • DR4-A won't read DVD-R, +R, -RW, +RW

    The drive only reads original DVDs, it burns just fine i used nero 6.3.0.2 to burn a DVD and it just worked fine the disc reads on other devices please help. my system it's 1.2 GHz duron Gigabyte 7DXE 256 DDR Ram 80 GB HD Toshiba SD1202 DVD ROM also

  • Itunes repeatdly requests ID and PW

    Hi all and tsx in advance Just recently bought some music (one song!) and when trying to reproduce it a endless requests for the Apple ID and PW message comes to my screen. Any idea how to solve this. I already followed the steps from the support gui

  • RDS 2012 to RDS 2012 R2 - RDVH cluster

    So i am upgrading everything. Using this guide http://blogs.msdn.com/b/rds/archive/2014/01/29/remote-desktop-services-upgrade-and-migration-guidelines-for-windows-server-2012-r2.aspx everything seems pretty straight forward. So i know there is no upg