I keep losing audio while editing...any advice?

Keep losing audio while moving stuff around while editing... can't figure it out

Can you tell us what type of actions you are performing to evoke this behaviour?
Do you know the properties of audio file you are using?
Al

Similar Messages

  • The tip of an audio cable broke off and is lodged in the Mac audio port.  Any advice on how to remove?

    The tip of an audio cable broke off and is lodged in the mac lap top audio port.  Any advice on how to remove it?

    https://discussions.apple.com/thread/3554135?start=30&tstart=0
    Best.

  • Why do I keep losing audio/recorded tracks and SFX in my projects? I have tried: Saving as archive file/searching package contents etc. to no avail. Can anyone help?

    Why do I keep losing audio/recorded tracks and SFX in my projects? I have tried: Saving as archive file/searching package contents etc. to no avail. Can anyone help? It keeps telling me 'Audio file not found', and seems to be different tracks in the same project each time too.

    iamthewaughrus wrote:
    I also have this problem using Garageband in a school network situation when students open their project on one station, save it to their network drive, and later open it at a different station.  90% of the time there will be no issue, but sometimes audio files are lost. (Garageband '11, iMacs)
    That sounds like it might be a failure of the students to perform a Save As and check Archive Project when they do. This asks GB to pull all the files it needs into the associated .band document rather than point to them externally (and then risk not having them be there).

  • I am a realtor working with form simplicity on Safari but it keeps freezing up on me any advice?

    I am a realtor working with form simplicity on Safari but it keeps freezing up on me any advice?

    Adobe Flashplayer needs to be updated.
    http://mfrmls.com/component/content/article/570

  • AA3 keeps losing Audio Hardware Setup settings...

    I work in a broadcast center with a number of AA3 machines that keep losing their Audio Hardware Setup settings. It keeps switching from the LynxONE drivers to Audition 3.0 Windows Sound. I can find no documentation on this.
    I've found that the trigger is when AA3 has "release ASIO driver in background" NOT checked, and the user minimizes it and plays something from another audio program. Then they have to go in and set it back again before AA3 will pass audio again.
    Is there any way to prevent this from happening?
    Thanks.

    In the Options menu. Device Properties. Then you have tabs for Wave In and Wave Out amongst others. Also you may need to also set Device Order from the same Options menu.

  • Losing Audio While Importing DV - Missing Clips

    I am new to imovie. I just bought a Sony HC-42 miniDV camera and am using it in "passthru" mode to import old 8mm tapes from my old camcorder.
    I had no problems with my first tape, but now I keep having crashes. One interesting phenomena is that I keep losing the audio during playback of any imovie project. I can only rectify this by rebooting the computer. This keeps happening without a consistent trigger. HELP. Also, I noticed that I mysteriously lost the first clip in the project???
    I am using imovie 3.0.3. I am importing to a new external HD using firewire 400.

    Hi Mark
    What's comes first to my mind is:
    I don't daisychain Camera - ext hard disc - Mac.
    I would try to import but with the external hard disc disconnected. If this
    works OK then You know that Your Mac is on the boarder of what it can
    handle.
    I use QT 6.5.2 with Mac OS X.3.9. If You upgraded to QT 7 that can be
    another source to problems.
    Yours Bengt W

  • Losing audio when editing .mov files...

    I have 4 .mov video files that are parts of 1 video. I can't get them into Apple TV, but I wanted to join them together in one video, anyway. I'm not having any luck doing that. (I have the right to have these videos.)
    I can bring them into a sequence in FCP 6.0.6, and even export them in a form that I can put on my Apple TV. But I lose the audio, which makes them useless.
    Probably worth noting: When I bring these small .mov files into my sequence, I can see them and scrub through them, but I can't play them at all (they all have the red line indicating they need to be rendered first). I have the latest iMac 27" with the i7 processor and two internal drives, so I can't see why they'd have to be rendered first. They are really low-quality, small files (around 3MB each).
    Can anyone tell me what the problem might be? Thanks for any advice.

    I have the latest iMac 27" with the i7 processor and two internal drives, so I can't see why they'd have to be rendered first
    FCP only works natively with formats listed in the Easy Set Up list. It does NOT work natively with many formats that are intended for final delivery like MPG-4, h.264 and others. If you import those types of files into FCP they WILL need to be rendered. But it is better to first convert those files before you import into FCP. That fact that you can't hear the audio may indicate you're using a muxed format that will need to be demuxed for editing.
    This information is easily found in the User's Manual. It sounds like this would be a good time to read the basics.
    -DH
    Message was edited by: David Harbsmeier

  • Safari keeps crashing on iPad.   Any advice?

    Safari keeps crashing on my iPad 1 (IOS 5).  Soft reset has not helped.  Any advice?

    Try closing all inactive apps on the Task Bar.
    1. Double click Home button
    2. Hold apps down for a second or two until you see the minus sign
    3. Tap minus sign to close apps

  • My ipnone 5s keeps crashing and blue screening any advice

    My ipnone 5s keeps crashing and blue screening any advice

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I have to MBPs one one wifi network; when one connects, the other disconnects.  Can't keep them both connected.  Any advice?

    Hello,
    We have two MBPs on an Asus router (N56U) and we find that only one computer can connect at a time.  Within a few seconds of the other connecting, the one that was connected disconnects.  When we try to log on again, we're told that the connection timed out.  Or it "connects" but there is no internet.  Any advice?
    Thank you!
    Christian

    Hi Silvergc,
    Thank you for this.  I agree:  the problem seems to be either the router or the modem.  I now have an Airport Extreme and am hoping this solves the problem.
    Only now I have another problem--the airport utility can't find the airport extreme if I plug in an external harddrive into the airport extreme.  I should start another thread for this, yes?
    Thanks again Silvergc.
    Yours,
    Christian

  • How do i monitor/output digital/analogue audio while editing?

    I just switched to the mac pro and am learning FCP. Now i am forced to monitor audio output through my headphones. I want to tie the audio into my studio monitors and also be able to send optical audio in to the mac pro from my main mixer, a Mackie 1404. Do i need a DAC(Benchmark), a optical I/O digital mixer or both or something else? My budget is upt to $1,000, but i would like to spend <$300.
    In general, i am trying to figure out how to incorporate analog/digital audio/video in to my new editing system. Before this i was outputting analog video/audio in real time with a Velocity I/O card. I am now, obviously, converting to a new way of outputting my finished product and how to edit and work with the new Mac Pro.
    I guess i could also consider using the firewire also, right? I haven't worked with a firewire based audio hardware unit, so any info on that appreciated as well.
    Also, is the line out in the back of the Mac Pro mono or stereo? I appear to be getting a mono feed while monitoring clips i've shot.
    While researching i might list here some things i have come across. Opinions on these appreciated:
    Apogee Mini-DAC
    Edirol FA-66, 101
    Message was edited by: gnostic1919

    http://www.blackmagic-design.com/products/decklinkstudio/

  • Losing ram while editing with FCP7?

    I have a Mac Pro dual 2.8, latest Mavericks, and FCP7.  While I'm editing my ram goes from 12 gbs down to megabites over time so that I have to close FCP and restart to recover the ram.  I have a total of 16 GBs to start with.  Memory Clean helps a bit, and also shows that most of the ram goes to the file cache.  Is there a way to manually purge the file cache?  Do I have a "memory leak"?  Is it just the combination of FCP and Mavericks?  I never had such problems with 10.5 - 10.8 OS.

    Try shutting everything down, boot from cold and only run FCP.
    Does the same thing happen?
    x

  • Lost audio while editing video

    I lost my volume while ediing my video, I checked my volume and it wasn't muted, what else can it be?

    Llamadude99
    This morning I replied to your follow up where you told of your success and overcoming your audio issues for your Premiere Elements project. But, after I replied to your news of success, I could not find your latest post nor mine in your thread.
    I finally found them, but in the old 2013 thread of another. Here is the copy/paste from the 2013 thread to your thread here
    17. Llamadude99,  
      02-Mar-2014 22:30    in reply to A.T. Romano 
    Report
    I was trying different things and I went to tools to narration. I removed the mute audio before recording, then deleted the narration I previously did and then pressed undo, to bring it back and my audio returned on my video. Very strange but it worked. I wanted to thank you for taking the time to try to help me with this situation.I really appreciate it.
    Was this helpful?  Yes    No    
      Reply       
      |                        Translate           
            10,418 posts
    30-Apr-2006  
    18. A.T. Romano,  
      03-Mar-2014 07:38    in reply to Llamadude99 
    Llamadude99
    Thanks for the update.
    Later today I am going to try to get narration to cause the rest of the audio to fail. If I can, I will try what you said worked for you, that is,
    I removed the mute audio before recording, then deleted the narration I previously did and then pressed undo, to bring it back and my audio returned on my video.
    If this works, it may be the answer to this type of situation, and it will be a major contribution to the Premiere Elements community.
    Congratulation on your success. Great job.
    Best wishes to your daughter, her cousin, and you.
    ATR

  • Adobe CS3 Design Standard Crashes While Edit any .PSD file

    Please help me regarding when i have EDIT .PSD file in Photoshop that time Photoshop find a error and stop with below mentioned error list.
    Below mentioned all the stopping errors:
    Problem signature:
      Problem Event Name: BEX
      Application Name: Photoshop.exe
      Application Version: 10.0.0.0
      Application Timestamp: 4601eae8
      Fault Module Name: MSVCR80.dll
      Fault Module Version: 8.0.50727.6910
      Fault Module Timestamp: 4fee68f0
      Exception Offset: 00008aa0
      Exception Code: c000000d
      Exception Data: 00000000
      OS Version: 6.2.9200.2.0.0.768.100
      Locale ID: 16393
      Additional Information 1: b1e4
      Additional Information 2: b1e481bae519f9212437918a62cffd49
      Additional Information 3: eb15
      Additional Information 4: eb15c21560bc14fa587aabe9d6903a9e
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=190175
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\windows\system32\en-US\erofflps.txt
    Kindly resolve this problem
    Thanks,
    CK

    Bad news for you too.
    First, you are not addressing Adobe here in the user forums.
    Secondly, Adobe does not support CS3 any longer because it hasn't been sold for years.
    Therefore, you're left to the good will of fellow users who volunteer their time here free of charge, if one of them has a solution to your issue.  No one is under any obligation to reply, so ask nicely. 
    One thing I can tell you is that you have not applied any of the versions available for Photoshop.  Unfortunately, the Adobe auto updater was an unmitigated piece of cr@p in any version prior to CS6.  Do not rely on it to assume you are up to date just because it doesn't show any updates available to you under Help > Updates.
    You need to look for the downloads and apply them manually yourself.
    I can't offer any more assistance because I don't do Windows.  Sorry.

  • Can't keep my place while editing

    When I am making changes to my library, I am always brought to the top of whatever list I am working on after each change.  For example, I don't like a lot of genres on my list, I keep everything classified under about 12 headings, so when I add new music, I got to my genres tab and change the information for anything outside of my usual set.  If say I change and Unknown genre to Rock, as soon as it makes that change, I'm brought back up to the top of the list, which for me happens to be Classic Rock.  How do I set iTunes to leave me where I was when I'm chaning things.  In some of the longer lists, it's a real pain to continually have to re-find my place after each change I make.

    That was just one example.  It's when I change anything that it moves my place either to the top of the list, or in the case of adding in song or artist names to unknown stuff at the bottom of my main library page it moves with it to wherever that item ends up.  I just want it to stay where it as, either by moving to the next one down, or the next one up.

Maybe you are looking for