I keep losing the sound on Firefox and Aurora.

I am having sound issues with Adobe Flash videos, etc., on Firefox, even though my mixer is set to 100%. First, I cleared my cache, and that worked for an hour. Then, I chatted with a Firefox person and I was told to “end plugin-container.exe”. I was told that this would be a permanent fix. It worked for one day. I am running Adobe Flash 10, updated last weekend, and Firefox 7.0.1, also updated last weekend. So I spoke to a Firefox person again and this person recommended that I try Mozilla Aurora. It worked for a WHOLE DAY. I'm at my wit's end. I love Firefox but I don't want to hassle with it. I don't have any problems with IE or Chrome.

You say the batteries are okay.    Here are a few notes I've put together.
Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are more likely to give a depleted performance and may be of irregular size, often leading to connection problems.   Apple’s own brand, Eneloop and Energiser appear to be the best.
Rechargeable batteries for the standard Magic mouse are unlikely to exceed eighteen days before needing a recharge although the mouse itself can be a limiting factor.   I have seen reports that some Logitech mice vastly exceed this.    Apple may suggest more in their sales blurb but this is a realistic expectation.   The benefit (if you are organised) is that you can always have charged batteries available.   Regular batteries will give you between 25 and 35 days before they need to be replaced.
Note.  Never mix old and new batteries or rechargeable and regular.   The notes above are based on my personal experience, not shutting down my machine and using it for around four hours per day. 
Note.   Monitors do not always faithfully report battery strength, particularly the rechargeable ones.  
When checking your mouse or keyboard batteries ... Turn off the device. Remove the batteries, Clean the terminals both inside the battery compartment and the batteries themselves. Replace or renew both batteries. Turn on the device.   You should get a blinking green light if the device is paired. Click the mouse to activate it.  The green light becomes steady.

Similar Messages

  • Keep losing the sounds on my iphone

    sounds seem faint at times then when I tap my iphone they come on and go off

    I did and it works once and then doesn't work again

  • I keep losing midi sound in my 49e synth

    I select it in the track channel but for some reason I keep losing the sound or don't know how to get the 49e sound back.
    I am new to Logic 8 and was wondering if there is an easy tip on keeping track of my 49e synth sounds and not losing them?
    Thanks so much for any help.

    Windows or Mac?
    Check the codec folder in PPro programs to see if the codecs are actually present.
    If on windows, run a disk check to recover any possible corrupt files, (it's happened to me before with files that mysteriously disappear).  If still no luck, then restore your PC using a recovery point to before you installed that additional software and see if that clears it up.

  • Keep getting a pop up at the top of many websites I visit 'firefox security error content at *web address* may not load" I am using the most recent firefox and windows 7.

    Keep getting a pop up at the top of many websites I visit 'firefox security error content at *web address* may not load" I am using the most recent firefox and windows 7. This is happening at many sites, such as hotmail, google reader, and many others.

    Sorry, I don't think that is a message from inside Firefox, the wording doesn't sound correct - at least the beginning of that message. My "gut" thinks that is a MSN Live message to explain and compensate for their lack of security with a re-direct from a secure domain to an un-secure domain. ''(the end of that message)''
    {Ctrl + Shft + J} will open the Firefox Error Console - I'm curious what Firefox has to say about that situation. If you find the error message for that domain, you can right-click the message to '''copy''' it and then paste that error message here.
    Maybe '''TonyE''' or '''cor-el''' will be more familiar with the situation at Live and maybe at Google Reader, I don't use either of those services and have never seen a message like that myself.

  • Firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything

    firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything, plus there is no option to report an error so i cant even get this checked and this seems to be the case on 3 different computers i use all have windows 7 32bit.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • Can't re-order my queue on Netflix and keep losing the connection

    I'm having so much trouble with Netflix!  I can't re-order my queue, I keep losing the connection, and it's painfully slow. Is Netflix known to be unstable on iPad? Other internet connecitons seem to be fine. 

    I rarely have problems on it - I do occasionally have drops in video quality, but nothing consistent. It does require a very strong and stable network connection, and I also wonder if they have periodic "crush time" incidents on their end, considering the rapid growth of Netflix streaming.
    Updating the queue is a pain on it - you can't do it on the app, and have to go to their website. I generally find it easier to do on a computer.

  • I just got firefox 8 and everytime I open the browser it keeps opening the welcome to firefox 8 page, why is this?

    I just got firefox 8 and everytime I open the browser it keeps opening the welcome to firefox 8 page, why is this?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

    I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

    Plenty of suggestions.. only you can find out which one is correct.
    What model AE? What firmware?
    Since Panasonic TV is not apple it will use SMB windows type networking.. everything but Apple does.
    Are the names in the AE all SMB compatible.. ie short.. max about 20 characters.. no spaces and pure alphanumeric.
    Is the security set to WPA2 Personal with a pure alphanumeric password of 10-20 characters.. more is fine if you suffer paranoia but isn't needed.
    Fix the wireless channels.. so it doesn't flip flop like a dying fish.
    There are only 3 channels for 2.4ghz that do not overlap, 11, 6, 1  although someone suggested 8 works well if you have heaps of interference. If you live in flat/apartment building you have heaps of interference.
    Lastly is it stable if the distance is 3M direct line of sight?
    If not then get a high power wireless AP and use that instead.

  • My Macbook keeps losing the desktop appearance and keyboard settings. How to fix this?

    My Macbook Pro keeps losing the desktop appearance and keyboard settings randomly after going to sleep. They go back to default settings. I run the very last update of Snow Leopard.
    How to fix this once and for all?

    How do I cleanly disconnect.  I usually go to File, quit RDC.
    someone told me that it could be my old macbook tying it up but most everything has been wiped off of that computer.

  • TS1398 My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed!  My iPhone 4s and daughters'  ipad2 have no problems at all. Any ideas anyone?

    My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed!  My iPhone 4s and daughters'  ipad2 have no problems at all. Any ideas anyone?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iMac keeps losing the connection to my chosen Airport Wi-Fi network.  Anyone know why this happens?

    My iMac keeps losing the connection to my chosen Airport Wi-Fi network.  Anyone know why this happens?

    Close all Apps and see if Activity Monitor shows any processes runnung.
    Not that I think this is the cure but have you tried these resets:
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.
    PRAM RESET
    Zap the PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Problem with ARD3 keeps losing the cursor

    I am having problems with ARD3 whereby I keep losing the cursor when controlling another machine. The cursor is still there but you have to click-drag to see it moving. There was a similar problem a few months ago after a system update and pre ARD 3.1. I used to be able to upload the ARD client and that would solve the problem temporarily. But now that won't even work.
    Another thing I notice when that happens is that my "Hidden Dock" stops appearing unless I click in the area. That also happens with my menus. And Expose stops working too.
    The only way to get around the problem, is to either restart the computer or leave it for anything up to 1 hr, then it will be fine again.
    Does anyone have the same problem?
    I use a MacBook Pro DC 2G with 2G of RAM. 10.4.9 and all the latest System Updates including Security Update 2007-04. This started happening even before the 2007-004 security update.
    MacBook Pro DualCore 2G   Mac OS X (10.4.9)  

    I find that this happens only if a tool tip comes up after having it over an item in the toolbar however clicking in the remote computer's windows somewhere will bring the cursor back. Additionally switching windows, to say the main ARD window, and then back again will restore it as well.

  • How can i transfer videos without losing the sound to my iPhone 3G?

    Hi
    I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
    Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
    How can i transfer videos without losing the sound to my iPhone 3G?

    One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
    http://www.apple.com/iphone/specs.html
    What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
    There's software out there that might make this easier for you but I can't recommend anything specifically.

  • When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

    When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • How can I get my Mountain Lion more stable on the internet? It keeps losing the signal. Lion is solid as a rock on my other Macbook using the same router.

    I downloaded Mountain Lion on my Macbook Air, and it works without a hitch except for internet connectivity. It keeps losing the signal. My Macbook using the same connection is solid as a rock and never loses the connection. Is there something I can do? Since my Macbook works weell under exactly the same conditions and if memory serves so did my Macbook Air with Lion before I downloaded Mountain Lion, none of the usual fixes seem to apply.
    Applehank

    I have the same problem, I think.  I dont lose wifi signal, the mba stays connected to the router the whole time.   Pings also seem unaffected by this problem.  The problem is that web pages seem to load intermittently, in other words, it loads a page in 2 minutes.  It loads:
    the first 25% in the first 5 seconds
    the next 25% in the next 50 seconds
    the next 25% in the next 5 seconds
    the last 25% in the last 50 seconds
    Its quite annoying considering this can be as simple a page as goolge search results or even google.com.
    I thought it was my ISP and i even made a big racket about it, switched ISPs and I have the same problem.
    With the previous ISP I had a cisco router.  This new ISP supplied their own modem/wifi.  That doesnt seem to be the problem.  
    Im thinking its a config issue on my mba.  I have the latest updates to ML.
    Any ideas?

Maybe you are looking for

  • I am not able to access Firefox under one user account on my computer so I created another account. How can I transfer the bookmarks from the old account?

    I use windows Vista and I cannot open Firefox under one user account (I keep receiving the "firefox profile cannot be loaded . . ." error message) on my computer so I created another account. How can I transfer the bookmarks from the old account?

  • Tcode VL32N

    Hi, When i execute tcode VL32N - put inbound delivery number - Select pack - put packing material "pack_box" - enter some handling unit .. i get below errors. When : handling unit - 0 - error "Handling unit 0 already in existence" When : handling uni

  • Power mac g4 Agp ''sawtooth'' wont install 10.4.11

    hi i have a power mac g4 (AGP 400 mhz) i boot into the 10.4 install dvd about 1/5 th into the install it says please try installing agian. when i restart without the disk in it shows the flashing no os floder.about 5 seconds after that it shows the w

  • SINGLE SCREEN ENTRY OF CONFIRMATIONS

    Hi, Iam from other module and I have a requirement in PP.When I execute CO11N transaction in one Client(Dev) Iam getting a screen with 6 fields in Activities(Activity1,Activity2,Activity3 etc) and in the other client(QA) Iam getting a screen with ONL

  • CS4 "make layers same size" Syntax Error 8

    Using Photoshop CS4 on a Mac with 10.6.8. I am working with a file that has several individual portraits as separate layers. All the portraits are approximately the same size, but I want to make them the exact same size (325 pixels by 325 pixels, not