I keep on getting a Microsoft Visual C++ Runtime Error on Elements 9.
I've had this since 2012 and haven't had an issue until last night. I've tried restarting my computer and opening Elements in different ways (directly, through shortcut, and indirectly through a picture). I can't get it to work, and it's now telling me to contact "the application's support team for more information." What should I do?
You contact Adobe Technical Support or Adobe Customer Service. This is an Adobe application and Adobe has sole responsibility for sup[ort of their products. Microsoft does not provide support for Adobe products.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Similar Messages
-
Microsoft Visual C++ runtime error when building installer
I'm trying to build an installer for a very simple VI I've created in 8.2. Before the build is complete I get a Microsoft Visual C++ runtime error message pointing towards the labview.exe file. I've already tried re-installing LabVIEW and deleting older versions of the LabVIEW Runtime engines with no luck. I recently upgraded my system from LabVIEW 6.1 and I'm using Windows XP. Any suggestions?
Thanks.
LabVIEW 2012 - Windows 7
CLADI included waveform storage, runtime engine 8.2, ni-visa-runtime and ni-serial3.1. I tried to create a setup.exe by installer on an other pc. But it's completely the same behavior afterwards. I attached the error message. This message appears after I choose the path and continue the setup. It's the question which file is meaning.
I tried to create a setup.exe by installer without any additional.
The strange thing is it was unsuccessful with following message. Maybe this will be helpful to find the problem.
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_BuildDevPart.vi >> NI_MDF.lvlib:MDFBuildDevPart_Open.vi
Attachments:
missing file message.JPG 15 KB -
Itunes causes Microsoft Visual C++ Runtime Error at Vista Startup
I installed Itunes version 8.1.1 and Quicktime on my Toshiba laptop with Vista. The installation went in correctly and Itunes found my music library.
However, when i rebooted the system, i get a Microsoft Visual C++ Runtime Error Library error message that states "This application has requested the runtime to terminate in an unusual way. The message persists and Vista will not boot up.
I have to do a system restore in safe mode to get Vista usuable again.
Has anyone seen this problem and can you help me find the culprit.Some people have reported that Apple Software Update can cause this error, so you might try removing that and see if it helps. Removing that utility should not affect iTunes, though you won't get automatic updates (you can just download any new version of iTunes or QuickTime manually and install it). It would, however, be wise to make a backup of any purchased content or items that would otherwise be difficult to replace, just in case something goes wrong.
-
iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Why do I get Microsoft Visual C++ Runtime error when I open Premiere Elements 11 on my windows 8 ?
Why, when I open Premiere Elements 11 on my windows 8, do I get"Microsoft Visual C++ Runtime error. This application has requested runtime to terminate it in an unusual way.Please contact the application support team for more information."
Any solutions, thanks, Jim B.'jimmymega
We will follow up when you have time.
I am not sure if there is a misunderstanding in the communications. Please see
but how do I identify the "http://forums.adobe.com/message/5129399 ? Is there somewhere where there is the number 51229399?
When you click on that link, it should open to a thread with a discussion on troubleshooting the Microsoft Visual C++ Runtime Error situation. Did the link not open. It seems to be working. Please try clicking the link again and let us know the outcome.
Thanks.
ATR -
I get this error--"Microsoft Visual C++ Runtime Error, Program: c:\programfiles\mozillafirefox\firefox.exe, abnormal program termination" any ideas???
no specific web site causes this to happen.Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Microsoft Visual C++ Runtime Error when syncing ipod
When I'm at the end of ipod setup and I click done.. I get this "Microsoft Visual C++ Runtime Library" error.
It says: C:\Program Files\iTunes\iTunes.exe
R6025
- pure virtual function call
I haven't seen any posts relating to this problem. I'm unable to sync my iTunes with my iPod. In addition my iTunes is not recognizing my ipod, but my computer does. I've had to reinstall iTunes for it to recognize ipod. I've followed the other instructions (delete temp files / cleaning registry etc.) with no fix yet.
I think these may be related (hopefully). Any help is appreciated, thanks.
Message was edited by: Grimmer20
Message was edited by: Grimmer20I included waveform storage, runtime engine 8.2, ni-visa-runtime and ni-serial3.1. I tried to create a setup.exe by installer on an other pc. But it's completely the same behavior afterwards. I attached the error message. This message appears after I choose the path and continue the setup. It's the question which file is meaning.
I tried to create a setup.exe by installer without any additional.
The strange thing is it was unsuccessful with following message. Maybe this will be helpful to find the problem.
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_BuildDevPart.vi >> NI_MDF.lvlib:MDFBuildDevPart_Open.vi
Attachments:
missing file message.JPG 15 KB -
Microsoft Visual C++ Runtime Error in iTunes
The last few days I've tried to open iTunes and about 3-5 seconds after it opens I get an error report saying:
"Software Application has encountered a problem and needs to close."
I click "Don't Send."
Immediatley afterward I get a error message saying:
"Microsoft Visual C++ Runtime Error!"
I click "OK" and iTunes closes automatically.
So I checked out my QuickTime and I get a error saying:
"We're unable to find iTunes on your computer."
a few seconds later I get the C++ error message again.
hmm...any thoughts?Its seems to be working now.
I reinstalled Quicktime and updated iTunes. -
When trying to go from Organizer to Editor, I receive a Ryntime Error. It reads: Microsoft Visual C++ Runtime Error. Runrime Error Program c:\(x....
I kept getting the same error message too! Thank goodness I'm not alone in this!
-
Premier Elements 11 - anyone know the fix ? - Microsoft Visual C++ Runtime Error
Microsoft Visual C++ Runtime Error - shutting down Premier Elements 11
I see there are the fixes out there for Photoshop elements, but can't find the fix for Premier Elements 11. Anyone know where it is ?AC
Thanks for the reply. I understand your situation. It is not a good place to be.
The deletion of the Adobe Premiere Elements Prefs file, or, if necessary, the whole 11.0 Folder in which it exists
should only affect the preferences that you see in Edit Menu/Preferences/General. So, if you have customized any of
them, you will need to reset them to your customized values after the consequences of the deletions are determined.
In no way move, delete, or rename files/folders that are imported into a project after the project has been saved closed.
The consequences can be disastrous from the point of view of reconnecting source media to the project file.
At one time you must have had to connect your Premiere Elements 11 Windows to the Internet to get it installed/activated.
Also, there are some "supposedly" one time activations for certain features that need an Internet connection. I have
always worked with Premiere Elements Windows with an Internet connection so I am not sure if any of these deletions
under your circumstances will have effects other than what I described. And, it is not unthinkable that a one time activation
for a particular feature may suddenly require another activation.
What you could do, instead of deletion the Adobe Premiere Elements Prefs file or the 11.0 Folder in which it exists, do as
the Adobe document suggests, and rename the file/folder to disable which will allow you to get back what was there
before if necessary.
Consider the above, and we will think about this some more.
Thanks.
ATR -
Is there a solution to fixing the unexpected Microsoft Visual C++ RUNTIME ERROR'S I am getting
These are Screen Shots of what is happening.
-
Why do i receive the Microsoft Visual C++ Runtime error?
i keep getting the error message below when trying to access the Blizzard Store for World of Warcraft items & try to go past the first page :
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files\Mozilla Firefox\firefox.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.As Firefox won't even start how am I to do this?
-
When I try to upgrade Labview 6.0i to 6.0.2 by running the setup.exe file I downloaded from the NI site, I immediately get a dialog box with the header "Microsoft Visual C++ Runtime Library" and it says "Runtime Error! Program: C:\setup.exe abnormal program termination."
I'm running Windows 2000, but I've successfully installed it on another computer with the same setup. I'm guess some of the DLL files in system32 has been corrupted or mismatched versions. But I don't know which one...
Anyone know what this means?Hello,
You can probably solve this problem by going to Start >> Run and typing the following:
Regsvr32 \msi.dll
Where is the folder where the msi.dll file resides on your computer (you can use Start >> Find to find the exact location). Once you do this, the installation of the 6.0.2 update should work properly.
Please let me know if you continue to have any problems. Thanks for your patience on this issue, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
How to solve dreaded Microsoft Visual C ++ Runtime error?
Hi,
This is my first post. Grrrrr!
I recently installed 2.5 after having 2.4 and 2.3 and everything has been running along great...until tonight.
When I tried to open 2.5 I get the following message:
"Microsoft Visual C ++ Runtime library
Program C :/ prog
This application has requested the runtime to terminate in an unusual way. please contact the application's support team for more info"
I have checked out on line for a work around but there doesn't seem anything that makes clear sense....ie looking for a state-.dat file that doesn't seem to exist in my computer (PC vista xp).
I have also seen that holding down the cntrl button when opening Lightroom can overcome the problem, which it does, at least up until it asks me to create a new directory, but I have no idea what I'm supposed to do to create a new directory.
Another thing, I notice that in my program files that I have both 2.4 and 2.5...I don't know if that's behind the conflict.
Many thanks,
AdrianI think you will find that the older LR folder is almost empty and so you'd have to reinstall 2.4 to get it running again and that wouldn't be the first thing to try.
A message about C++ Runtime error really doesn't indicate a particular problem but there are several possibilities:
1) Hard disk error or corruption where running a ScanDisk or ChkDsk or whatever it is called nowadays might help fix the problem.
2) Corrupt program files. Reinstalling might fix that.
3) A corrupt catalog, where holding down Ctrl (or Alt) when starting up LR will allow you to create a new catalog or at least open a different one, which might work, and get you past the error. Then you'd need to go to a backup catalog and redo all your work since then, where if you've been writing changes to XMP files, it would be a lot easier.
4) A corrupt preferences file. Navigate to C:\Users\[yourusername]Steve\AppData\Roaming\Adobe\Lightroom\Preferences and at least rename the whatever.agprefs file to whatever.agprefsX or something and then restart LR and see if things work differently.
5) An errant plug-in you've recently installed.
Item 4 might be the easiest to try and be the easiest to recover from, where all you'd need to do is re-adjust your settings, again, I think.
Item 3, a corrupt catalog, is also easy to test for, but recovery is more difficult. -
Labview 8.6 Microsoft Visual C++ Runtime error while installing
I am installing Labview 8.6 on my laptop which is having Windows Vista Home premium edition.
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I am unable to install it on my laptop. Can anybody please help me.
Thank youhi
broadly the error could be because of two reasons:
1. Runtime Engine exe file is corrupt in the CD you are using to install LabVIEW.
Solution: Download LabVIEW Runtime Engine 8.6 from http://joule.ni.com/nidu/cds/view/p/id/1101/lang/en
2. There's some problem with the windows installation in your PC.
Solution: you know reinstall windows
But before trying to reinstall, make sure you installed the msi.dll using "Regsvr32 (system folder path)\msi.dll" . I'm sure you did.
thanx
Ravi
Maybe you are looking for
-
How to create an External Alias for a Portal URL ?
Hi Gurus, Can anybody tell me how to create an external alias for a portal link(URL). Actually, my problem is i want to send this Portal URL(link) thru' a SendMail step to the user so that when he clicks on it, it will take him to his UWL(Ofcourse af
-
MXF codecs & encoder for pc? MXF AVI or MOV
Hello, I have a question about MXF codecs for PPro CS3. I have a Sony PDW-530 (2/3" professional SD camera) and I shoot on IMX50. I have a problem when I import the .MXF files in PPro CS3. PPro CS3 says, 'unsupported format or codec is missing'. When
-
Hi guys, I created events in sm64. These events should start a process chain. However when I trigger them manually I do not get the event in the event history nor does my process chain start. Do I have to activate any other stuff for events? Thanks i
-
i restored my phone and when i want to activate it, it requires the icloud id and password. i tried to sign in using apple id's password but it is wrong. plus, the icloud's id and password was set up at the shop. i don't know and can't remember what
-
hi i have written a jms message sender and receiver. i am using j2ee server to provide the jms service. no how do i get the initial context. i am not able to get the initial context and it is giving NoInitialContextException could anyone help me out.