I keep receiving the 3030 error when trying to connect to itunes.

I am unable to connect to itunes on my pc running Windows 7 64bit. I have attempted every possible fix for this that I have been able to find online. I have also deleted all antivirus software from the machine and made sure itunes is allowed through the firewall. I have no idea what else to try since I can't find any conflicting items. Is this just a case of itunes not being able to run on my computer, or is there a know issue that is easy to correct and I just haven't found the solution? Thanks for any help.

OK. Good. The most likely culprit is either your firewall or anti-virus software. Temporarily disable both while you are doing the update (then, of course, turn them back on when you are done).

Similar Messages

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please Help

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

Keep getting sync service error when trying to connect my iphone 5S.

Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Receiving Win32 app error when trying to download latest itunes

I am receiving the following error when I try to update itunes. .....Local Settings\Temporary Internet Files\Content.IES\37LS4QDM\iTunesSetup[1].exe is not a valid Win32 application.
I saw a previous post from someone with a similar problem. It was suggested that she update Windows XP and that solved the problem. I also have Windows XP and it is completely updated. I also tried emptying the files in the Temp Folder as suggested my another iTunes support page, but couldn't delete everything because two files were running and I couldn't figure out from what program. There were also folders inside the temp folder for iTunes, but I was afraid to delete them.
Any ideas???

Local Settings\Temporary Internet Files\Content.IES\37LS4QDM\iTunesSetup[1].exe is not a valid Win32 application.
hmmmmm.
are you running the install "online" or are you saving the iTunesSetup.exe to your hard drive and then running the install by doubleclicking the installer file?
are you connecting to a network (or directly to the internet) wirelessly?

Keeping getting the -3 error when trying to burn purchased music

Keeping getting the -3 error when I try to burn the music to an audio cd.

trying to transfer over library from my old hp itunes to new powerbook. burned some of the songs onto cds as data instead of audio but once the playlist was burned it said unknown error -50. then when i put the cd in my mac the same thing came up and it wasnt recognized by itunes on the powerbook. AHHHH. help please. oh and also some of my songs from the cd then went into itunes if i dragged them but some didnt. both mp3 and m4a. and i want my purchased songs to transfer too

I keep getting the -1 error when trying to restore?

So I'm trying to restore my iPhone 3GS but I keep getting the -1 error in iTunes.
I have tried putting the iPhone in dfu mode but had no luck.
Can anyone help?

https://discussions.apple.com/message/23298645#23298645
more
https://www.google.dk/search?q=iphone+restore+error+1&oq=iphone+restore+error+1& aqs=chrome..69i57j0l5.6429j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

I am receiving a 102 error when trying to update to iTunes 11.1.0

I am trying to update to iTunes 11.1 and OSX 10.8.5 but continue to receive the following error message:
"An error occurred while downloading the updates.(102)"
Here is the activity recorded from my Console.
Sep 18 14:14:10 kpl-kdileepan.kumc.edu Software Update[4014]: Product zzzz041-9488: no package found for identifier com.apple.pkg.iTunesX.11.1.0.delta
Sep 18 14:14:10 --- last message repeated 8 times ---
Sep 18 14:14:10 kpl-kdileepan.kumc.edu installd[4020]: PackageKit: Sandbox /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandboxManager/1.sandbox: relevance 136
Any thoughts are greatly appreciated.

I'm in the same boat.
Tried uploading to iOS7 on my laptop. It looked like it was working, but then said I needed to restore my phone. I did. Now I have a phone that won't turn on, won't "activate".
So I switch to my desktop, just to get my phone turned on again and working. Try to install iTunes 11.1 and get this message:
The operation couldn’t be completed. (NSURLErrorDomain error -1102.)(102)

I keep getting the same error when trying to subscribe to Creative Cloud

Hello,
I've tried several times to subscribe to Creative Cloud and everytime I get an error when I try to confirm the subscription.
I tried it yesterday and today on two different computers and got the exact same message :
"We're sorry, but we're having trouble processing your order. Please come back and try again later. To finish your purchase immadiately, please call us at +1 800-585-0774. If you're not in North America, you can look up a local number here."
I also tried to contact the phone number 08 05 77 00 77 (French one) but can't reach anyone...
Any idea on why this happens ?

Hi LRQDO
Sorry to hear you're having issues.
If you could send me a private message with a contact phone number I can arrange for our Sales team to contact you to assist.
Kind regards
Bev

[SOLVED] Keep receiving the same error when I try to install packages

Hello,
I keep receiving this:
[alessio@myhost ~]$ sudo pacman -S calibre
Password:
resolving dependencies...
looking for inter-conflicts...
:: libusbx and libusb are in conflict. Remove libusb? [y/N] y
:: python-dbus-common and dbus-python are in conflict. Remove dbus-python? [y/N] y
Targets (21): chmlib-0.40-3 dbus-python-1.0.0-1 [removal] libunrar-4.2.4-1
libusb-1.0.9-1 [removal] libusbx-1.0.12-2 podofo-0.9.1-3
poppler-qt-0.20.1-1 pyqt-common-4.9.4-1
python-dbus-common-1.1.1-1 python-imaging-1.1.7-4
python-mechanize-0.2.5-2 python2-beautifulsoup3-3.2.1-1
python2-cherrypy-3.2.2-1 python2-cssutils-0.9.9-2
python2-dateutil-1.5-2 python2-dbus-1.1.1-1
python2-dnspython-1.10.0-1 python2-lxml-2.3.4-2
python2-pyqt-4.9.4-1 python2-sip-4.13.3-2 calibre-0.8.59-1
Total Installed Size: 76.94 MiB
Net Upgrade Size: 75.93 MiB
Proceed with installation? [Y/n] y
(19/19) checking package integrity [######################] 100%
:: File /var/cache/pacman/pkg/calibre-0.8.59-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (checksum)).
Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package (checksum))
Errors occurred, no packages were upgraded.
[alessio@myhost ~]$
This happens with a lot of packages (linux-api-headers too for example) and makes it impossible for me to upgrade the system. I cleaned the cache, but the issue persists. Any ideas what I might be doing wrong?
Last edited by kfk (2012-08-09 05:52:45)

kfk wrote: I cleaned the cache, but the issue persists.
try changing mirrors then

Keep getting an unknown error when trying to burn an itunes cd

I cannot burn a cd from my itunes. I have done all the steps correctly. I keep getting an unknown error seconds after i hit the burn disc button and my cd pops out of my disc drive. I can burn cds using real media player but I cannot burn my itunes music. What do I do?

trying to transfer over library from my old hp itunes to new powerbook. burned some of the songs onto cds as data instead of audio but once the playlist was burned it said unknown error -50. then when i put the cd in my mac the same thing came up and it wasnt recognized by itunes on the powerbook. AHHHH. help please. oh and also some of my songs from the cd then went into itunes if i dragged them but some didnt. both mp3 and m4a. and i want my purchased songs to transfer too

I get an error when trying to connect to Itunes Connect

I recently submitted my payment for my Apple developer account and it was approved and the $99 paid.
However when I try to connect to Itunes Connect, I get the error message:
Apple ID does not have permission to access iTunes Connect.
Is there something that I am missing? Thanks in advance for the help.
-J

You can start with this troubleshooting article.
http://support.apple.com/kb/ts1368
You may want to restart the iPad and restart your computer as well. You can always download the updates in iTunes on your computer and sync them that way - but that does not solve the problem - it just gets you the updates.

I received a Runtime error when trying to do an iTunes update: R6034 An application has made an attempt to load the C runtime library incorrectly.

How do I resolve this problem. When I try to rerun the upgrade I keep getting same message.

First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I keep getting the same error when trying to install?

any ideas?

what OS are you trying to install this on? If it's Windows 7 or later you will need to run the install as an administrator.

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

Oracle Fatal error when trying to connect through sqlplus

Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
Mannu

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

I keep receiving the 3030 error when trying to connect to itunes.

Similar Messages

Maybe you are looking for