I keep receiving this error: "the application cannot be installed due to a certificate problem" when trying to update program that use adobe AIR (vudu-to-go)
Can anyone tell me how I can get around this error? I've tried reinstalling adobe air and reinstalling the programs but neither works.
This issue happens when an older version of Adobe Story is already installed on a system.
To resolve this issue you will have to first remove that version and then install the latest one.
Now depending upon which system you are using, below are the steps:
MAC:
Open 'Applications' folder in Finder.
Move 'Adobe Story' application to Trash and remove it from Trash too.
Just to make sure that this application is not installed on a different drive, do a search for 'Adobe Story' in spotlight. If it is present on a different location, then remove it from there too.
Now log into story.adobe.com and download the desktop application again and install it.
WINDOWS:
Open Controls Panel and uninstall Adobe Story application
Now log into story.adobe.com and download the desktop application again and install it
Similar Messages
-
can anyone help
Please follow these steps:
- Remove the currently installed Adobe Story app from your system
- If you are using windows, you can do it through control panel
- If you are using Mac, open the Applications folder and move 'Adobe Story' application to Trash. (Please remove it from trash too)
( Please make sure that no other installation of Adobe Story is present in your system by searching 'Adobe Story' in Spotlight. Remove if present. )
- Then install the latest version by downloading the installer file directly from: http://story.adobe.com/AIR/AdobeStory.air -
How can I downloade a trial of Adobe Elements 12?
I followed the instructions to download assistant...but get this message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.Hi alposer,
Please remove the copy of the Adobe Download Assistant you currently have installed and then reinstall the Adobe Download Assistant.
Regards,
Rave -
the application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.
i DONT HAVE THE DISK FOR aDOBE 6.0 ANYMORE HOW DO i UPGRADE??You cannot in any case buy an upgrade from Acrobat 6, it is too old. So it's a full price purchase I'm afraid.
-
Has anybody seen this in Mac OS 10.10?
Ok, just Acrobat XI Pro? Nothing else? (I've seen talk of this message, but for different Adobe products).
And was Acrobat XI Pro ever installed before? -
Hi All,
I've been running into this error message when trying to create a new subsite
Sorry, something went wrong
The formula cannot refer to another column. Check the formula for spelling mistakes or update the formula to reference only this column.
Note everything was working fine before, this just started happening recently...
At first I thought it was because of my template, but as I have tried, I can't even create subsite using the templates provided by Sharepoint...
has anybody encountered similar problems recently?
Any help is apprieciated!
Fan YangHi Fan,
If you create asubsite using the SharePoint default template, what error did you meet? Was it same with the error?
Which site template did you use for the parent site?
Please check whether you can create subsite at other site collection.
In addition, please trace the exact error by using Correlation ID.
Here are two great blogs for you to take a look at:
http://www.habaneroconsulting.com/insights/An-Even-Better-Way-to-Get-the-Real-SharePoint-Error#.UwrFamiwrwo
http://blog.credera.com/technology-insights/microsoft-solutions/troubleshooting-sharepoint-errors/
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Application cannot be installed due to a certificate or damaged installer problem.
I downloaded from here (http://www.adobe.com/go/muse_latest_mac) since the CC App Manager (for Muse) is not working either.
I also tried launching my old version of Muse. I saw the option to download a new one so I did. This time it says the installer is damaged.
I uninstalled the old application and attempted a re-install using the link from above. Installer damaged message followed.
Looks like I won't be doing much with this for a while. I'll check back later...Please refer to the following article on working through this error message - http://helpx.adobe.com/muse/kb/installer-file-damaged.html.
Thanks,
Vinayak -
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???
Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.
-
I keep getting this error message and cannot back up my Mac Book Air to Time Machine; "Air.sparsebundle” is already in use" how do I correct this?
Restart the Time Capsule. Launch AirPort Utility and check for a firmware update.
-
i keep receiving this message "the disc was not ejected properly. if possible, always eject a disk before unplugging it or turning it off"
I had this problem too, where it seemed I couldn't go eight hours without the Duo drives dropping and getting the "disc was not ejected properly" error message.
I tried the following and so far it seems to have fixed the problem:
In System Preferences > EnergySaver, make sure the setting “Put hard disks to sleep when possible" is unchecked.
I did this only on the Power Adaptor tab, but you might want to uncheck the setting on the Battery tab as well to be safe. (In my case, the Duo drives are unlikely to be attached when I’m running on battery, so I left the setting checked for the Battery tab so that the system can still power down the internal drive.)
Since I made the above change ten days ago, the Duo disks have not dropped, even when I left the system on with the Duo disks connected for a couple of days.
FYI I have the Duo set up with two RAID 1 sets spanning the two drives. I'm using Mavericks 10.9.4. -
Compressor 4 crashes on opening keep getting this warning: The application “Compressor” unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again? Tried Restoring windows. It crashes again. Tried not = Same result. This is the first time I've actually used the app although I purchased it back in April (I think). I had my first longform project completed in FCPX and tried sending it to Compressor 4 and got this result over and over again.
Steve,
Sorry to say I've not had any success in getting Compressor 4 to work. I've tried every suggestion mentioned earlier on this topic to no avail. Compressor 4 is dead in the water. On the last two projects I had to go back to Compressor 3.x.xx to complete the projects. The only hint that I have of wha may have happened concerns something I did early on. When I bought this computer I decided to replace the hard drive with a larger one. Since I already had my software up and working on the drive that came with the computer I decided to clone everything to the new larger drive. As I recall, Compressor 4 worked on the original drive but it doesn't work on this cloned version. So maybe there is a relationship there. I haven't had a chance yet to reinstall my old drive and see if C 4 works on it. If it does work then I know the source of the problem but not how to fix it on the new drive. Did you do anything like cloning your drive recently too? It's just a thought and may not lead anywhere but later this week when I catch a break I'll give the old drive a try and will post my results.
Thanks,
Peter -
TS3297 keep receiving this error message -42408
keep receiving this error message:
"We could not complete your iTunes Store request. An unknown error occurred (-42408).
I am sure I am using my correct Apple ID and password as I can log in without a problem but my iTunes keeps sending me this message and doesn't allow me to sync with my iPhone...https://forums.adobe.com/search.jspa?q=%22Lightroom+encountered+and+error+when+reading+fro m+its+preview+cache+and+needs+…
-
I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That’s all we know. in English
Bookmark and use this;
Download the '''[https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
This add-on is very simple: on installation, it backs up
and then resets your search preferences and home page
to their default values, and then uninstalls itself. This
affects the search bar, URL bar searches, and the home page.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
i have this error ''the iphone *** cannot be updatet at this time because the iphone software update server could not be countacted ore is temporarily unavailable'' i have 2-3 days tha try to update or restore the iphone but tha same again :/ plzz helppp
Try updating directly on the device, via iTunes on the computer, and iTunes on a different computer.
If the iPhone has been hacked or jailbroken, it may not be possible to update. -
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?
Maybe you are looking for
-
Facebook app issue - lumia 530
I have an issue with my facebook app not updating as u scroll down news feed and group pages It's not an ipv6 issue as I have a virgin media SH2 router and only ipv4 capability. All other phones/tablets run fb apps fine (ios and android). Issue is on
-
Searching only a particular list or library
Just completed an upgrade from WSS 3 to 2013 Foundation. All went well, but overlooked in our testing was that it seems users can no longer only search within the particular document library they are in. We have a couple knowledge base sites that sh
-
Hi, I will be configuring ALE to trigger Master data, change pointers and may be some custom development. What Authorization I must have to do the job?. Our basis team is new, Please help me what Roles I must have to do my job. Please note I dont nee
-
RMAN start_time and End time in Oracle 9i .
Hi , To find exact time duartion for RMAN backup on 10g i used following query . select operation, start_time, end_time from V$RMAN_STATUS where start_time > sysdate -1 and operation='RMAN' ; But in Oracle 9i v$RMAN_STATUS view doesn't exist . How to
-
I'm working with Application Server WebLogic 5.1. In my Servlet or JSP why can't I invoke the ResultSet methods getRow, afterLast, beforeFirst when the method next works? My error message is: Servlet failed with Exception java.lang.AbstractMethodErro