I keep receiving this error3259 message when i try to update my ipad 2 . is there some way i can download the ios 4.3.5 update besides using itunes??

network connection error keeps coming up but i can download from safari just fine.

What version shows in Settings > General > About > Version ? If that doesn't show 5.0.1 then see if you can update to it via the following.
To update to iOS 5.0.1 you need iTunes 10.5 on your computer. When you've got iTunes 10.5 installed then connect your iPad to it and copy any purchases off the iPad to your computer's iTunes via File > Transfer Purchases. You should also backup the device (right-click the iPad 'device' and select 'back up'), and copy off any important documents, file, notes etc (e.g. by email, the file sharing section at the bottom of the Apps tab in iTunes, wifi, whatever the apps that you use support) - the update process should backup and restore the content but it's best to be safe.
If iTunes doesn't prompt you to update to iOS 5.0.1 on your iPad, then with your iPad connected to and selected on the left-hand side of it, then on the Summary tab on the right-hand side click the Check For Updates button.

Similar Messages

The iPad "my iPad name" could not be synced because the iPad could not be found on the network. Why am I keep receiving this error message when i try to wifi synce my iPad?

How can I fix this problem? The iPad appears under devices in iTunes but when i try to synce it, thats the error message I receive.

Hello Gentlemen,
I too have the same problem, and I see that nobody has found a working fix yet. How dissapointing. I would have thought that Apple would have tried to fix this by now. Who knows how many others are in the same boat?
I am unable to sync my iPad at all. This means that I can't make a backup and so can't clean and restore it. I can't add any music. I can't get my photos off the iPad either. And so on! My brand new iPad is incapable of doing anything usefull! Don't fret Apple, I WILL tell all my friends what my opinion of your devices are.
In my opinion this is a CRITICAL FAILURE FROM APPLE!
I believe that it's undeniable that this is a stupid uniformative error message that leads me nowhere. Of course the connection went away. BUT WHY? HOW AM I SUPPOSED TO RESOLVE THE PROBLEM IF YOUR ERROR MESSAGE DOESN'T GIVE ME ANY USEFULL INFORMATION????
AND WHY CAN'T I CAUSE IT TO SKIP OVER THE BACKUP STEP SO AT LEAST THE DEVICE HAS SOME FUNCTIONALITY?
There are no published fixes that work. The only thing close, was a recommendation to reset the iPad and try again. This didn't do anything but waste more of my time.
Hopefully, my Rant will cause someone to take a stab at coming up with a resolution. I JUST NEED TO KNOW HOW TO GET MY IPAD WORKING AGAIN.
Is that too much to ask?
Regards,
Steve

I keep receiving an error message when i try to sync my phone of : 1450 What does this mean?

I keep receiving an error message when I try to Sync my I phone 4. It says Can't Sync 1450. What does this mean? I've had this phone for over a year with no problems.

Yep. Tried that. And just did it again.
Still no joy.

I keep getting an error message when I try to sync my ipad or iphone to my iMac: "The iPad (or iPhone) cannot be synced. An unknown error occurred (-50)." What is this about? Thanks

I keep getting an error message when I try to sync my iPad or iPhone to my iMac, as follows: The iPad "_________" cannot be synced. An unknonw error occurred (-50). Does anyone know what this is about - thanks.

Error -50 is a very unhelpful generic communications error with a number of possible causes. Something between the drive to which you are downloading and the drive from which it is all coming is not working correctly, which probably leaves several hundred options.

I keep receiving an error message when I try to send an adobe document through Outlook email.

I keep receiving an error message when I try to send an adobe document through Outlook email.
The message is : Either there is not default mail client or the current mail client cannot fulfill the message request. Please run Microsoft Outlook and set it as the default mail client.
I have checked everywhere on my system and changed Microsoft Outlook as the default mail program but nothing is helping. Does anyone have any ideas?

I am having the same issue, just replied to a different post on the issue. I am running Acrobat X Pro with Win 7 Pro 64-bit. This is a new PC, but my last PC was a 32-bit OS and I didn't have this issue. I was suspecting that it is due to the 64-bit OS.
Reading this post though, I am starting to wonder if there isn't something else going on. When I go to Edit>Preferences, I don't have anything related to email under Categories, or even within any of the categories listed. I am I missing a plug in or something? Or is this a component of a previous version of Acrobat?
I tried to attach a screenshot of the error message but getting a new error while trying to attach! File is only 25kb! Will have to live without i guess.

I keep getting this error message when I try to download Photoshop Elements -413 Header Length too Large

i keep getting this error message when I try to download Photoshop Elements -413 Header Length too Large
Any suggestions gratefully received

clear your adobe.com cookies or use a different browser.

I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme.

I keep getting this error message when i try to install the latest version of itunes, the program can't start because MSVCR80.dll is missing from your computer. try reinstalling the program to fix this problem??

I am having trouble reinstalling my Itunes on my desktop which uses Windows 7 and I can download it but once it's complete i keep getting this error message...The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Please help me.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I keep receiving an error message when i try to update/uninstall 0x80004002

I receive an error message whenever I try to update/uninstall iTunes. It says, "error message 0x80004002: this feature cannot be used, please contact your technical administrator"

Yep. Tried that. And just did it again.
Still no joy.

I keep receiving this error message when I am online:

Flash Player not available for your device
Apple restricts use of technologies required by products like Adobe® Flash® Player. Until Apple eliminates these restrictions, Adobe cannot provide Flash Player for the iPhone, iPad or iPod touch.
Copyright © 2011 Adobe Systems Incorporated. All rights reserved.

planb77,
I am not doubting what you have said, but isn't that kind of crazy? I mean, a huge chunk of the internet uses flash. Why is it that Apple will not fix this situation? I have and still use an eMac with OS X version 10.5.8 and it handles flash just fine. My eMac was not capable of running 10.6. This is the first time I have not been able to upgrade to the newest version of OS X. I have read where 10.7 Lion will be coming out sometime this summer and I plan on purchasing a new Mac when that happens. Either a new Mac Book or an iMac. Folks are saying that Lion is a merging of OS X and the iOS. Will lion support flash? I do apologize if I am asking questions that you cannot answer. Thank you, for taking the time to respond to my question.
Larry Campbell
North Carolina

I keep getting this error message when I try to open a project?

Projects created with Adobe Premiere Pro and Adobe Premiere Elements are not compatibe. Please use the appropriate application to open this project.
I have tryed to open old projects/start new and just keep getting this message.
Thanks in advance for the help.

Leha23
Thanks for the follow up. Let us go through the usual drill for users of Premiere Elements 8 (not too old from my point of view).
1. Are you working from the 8.0.1 Update of the program? That is very important for everyday performance of the version.
2. Do you have the automatic features of Background Rendering and AutoAnalyzer turned off. Very important since they are major grabbers of computer resources. Both are in preferences, Background Rendering in the Premiere Elements workspace Edit Menu/Preferences/General and AutoAnalyzer in the Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer options.
3. Let us try flushing the preferences...the path for Windows 8 64 bit would be
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
8.0
and in the 8.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not do the job, the delete the whole 8.0 Folder in which the Adobe Premiere Elements Prefs exists.
Make sure to be working from Folder Options Show Hidden Files, Folders, and Drives active so that you can see the complete path.
I did not see anything in Hunt's link that cited your error message specifically. It appeared to be an overall troubleshooting article on damaged projects. I did not go down that path since you said that you are having the error message problem with new as well as old projects.
About 3 years ago, I worked with another Premiere Elements 8 user with this same error message. In that case, it spontaneous disappeared. When you get this error message, does it present with an OK or Continue button? This problem has been reported before here and with Premiere Elements 8.0/8.0.1. In each case, the core of the problem was left undefined.
Looking forward to your follow up.
Thanks.
ATR

I keep gettin this error message when i try to compile can't fix

MY CODE
import java.text.DecimalFormat;
public class MotelBase{
private int nite;
private int numadult;
private int numchild;
final double ADULT_RATE = 25.0;
final double CHILD_RATE = 8.0;
public MotelBase (int inNite, int inNumAdult, int inNumChild){
     nite = inNite;
     numadult = inNumAdult;
     numchild = inNumChild;}
public int getNumAdult(){return numadult;}
public int getNumChild(){return numchild;}
public int getNite(){return nite;}
public double getAchg(){return numadult * nite * ADULT_RATE;}
public double getCchg(){return numchild * nite * CHILD_RATE;}
public double getBase;{return (getAchg + getCchg);}
public double getTax;{return (getBase) * .10;}
public double getTotal;{return (getTax) + (getBase);}
public void setNite(int inNite){nite = inNite;}
public void setNumAdult(int inNumAdult){numadult = inNumAdult;}
public void setNumChild(int inNumChild){numchild = inNumChild;}
public String toString(){return "Number of Adults: " + this.numadult + "\n" +
                                "Number of Children: " + this.numchild + "\n" +
                                "Number of Nights: " + this.nite + "\n" +
                                "Base rate: " + this.getBase + "\n" ;}}
**Here are the error messages when i compile**
javac -d . -g -classpath . MotelBase.java
MotelBase.java:17: return outside method
public double getBase;{return (getAchg + getCchg);}
^
MotelBase.java:18: return outside method
public double getTax;{return (getBase) * .10;}
^
MotelBase.java:19: return outside method
public double getTotal;{return (getTax) + (getBase);}
^
3 errors
Can anyone help me

so i removes the semi's and added ()'s
public double getBase(){return (getAchg) + (getCchg);}
public double getTax(){return (getBase) * .10;}
public double getTotal(){return (getTax) + (getBase);}
and this happened
javac -d . -g -classpath . MotelBase.java
MotelBase.java:17: cannot find symbol
symbol : variable getAchg
location: class MotelBase
public double getBase(){return (getAchg) + (getCchg);}
^
MotelBase.java:17: illegal start of type
public double getBase(){return (getAchg) + (getCchg);}
^
MotelBase.java:17: cannot find symbol
symbol : variable getCchg
location: class MotelBase
public double getBase(){return (getAchg) + (getCchg);}
^
MotelBase.java:17: illegal start of type
public double getBase(){return (getAchg) + (getCchg);}
^
MotelBase.java:17: incompatible types
found : java.lang.String
required: double
public double getBase(){return (getAchg) + (getCchg);}
^
MotelBase.java:18: cannot find symbol
symbol : variable getBase
location: class MotelBase
public double getTax(){return (getBase) * .10;}
^
MotelBase.java:18: illegal start of type
public double getTax(){return (getBase) * .10;}
^
MotelBase.java:19: cannot find symbol
symbol : variable getTax
location: class MotelBase
public double getTotal(){return (getTax) + (getBase);}
^
MotelBase.java:19: illegal start of type
public double getTotal(){return (getTax) + (getBase);}
^
MotelBase.java:19: cannot find symbol
symbol : variable getBase
location: class MotelBase
public double getTotal(){return (getTax) + (getBase);}
^
MotelBase.java:19: illegal start of type
public double getTotal(){return (getTax) + (getBase);}
^
MotelBase.java:19: incompatible types
found : java.lang.String
required: double
public double getTotal(){return (getTax) + (getBase);}
^
MotelBase.java:26: cannot find symbol
symbol : variable getBase
location: class MotelBase
"Base rate: " + this.getBase + "\n" ;}}
^
13 errors
it seem like everytime i fix something there is a virtual landrush of errors, i appreciate all of your help thank you for taking the time to answer my questions

TS3297 keep receiving this error message -42408

keep receiving this error message:
"We could not complete your iTunes Store request. An unknown error occurred (-42408).
I am sure I am using my correct Apple ID and password as I can log in without a problem but my iTunes keeps sending me this message and doesn't allow me to sync with my iPhone...

https://forums.adobe.com/search.jspa?q=%22Lightroom+encountered+and+error+when+reading+fro m+its+preview+cache+and+needs+…

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

I received this error message when trying to use my time capsule. MacBook Air.sparsebundle is already in use. What does this mean?

I received this error message when trying to use my time capsule. Macbook Air.sparsebundle already is use. What does this mean?

First, restart the MacBook Air and the Time Capsule. In most of the cases, this solves the problem.
If not, see > http://pondini.org/TM/C12.html

I keep receiving this error3259 message when i try to update my ipad 2 . is there some way i can download the ios 4.3.5 update besides using itunes??

Similar Messages

Maybe you are looking for