I kept having errors on my Apple ID with frostycup=1 and STATUS_CODE_ERROR. How to troubleshoot them?

How to troubleshoot them and eliminate the frostycup=1 and STATUS_CODE_ERROR.

Hey Lee,
To make sure we are on the same page you are trying to access and download content the Mac App Store. From the time of your post, I do know that the multiple online stores were having issues with accessing content. Any time you have issues with connecting to any store, take a look at the link below to check the status of all of Apple’s services. If you cannot access that content now let me know.
Apple Services, Stores, and iCloud
https://www.apple.com/support/systemstatus/
Take care,
-Norm G.

Similar Messages

HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

My iMac won't start, it only has the apple sign with the timer and downloading bar at the bottom and then switches off.

My iMac won't start, it only has the apple sign with the timer and downloading bar at the bottom and then switches off.

Hi Paula2808,
I’m sorry you are having trouble starting up your iMac, that must be quite frustrating. There are some troubleshooting steps I would suggest in order to get you up and running again.
First I suggest using the steps in this article for the Apple logo appearing -
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
If things still are not working correctly, you may want to continue with the steps in this article -
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Thanks for using Apple Support Communities.
Best,
Brett L

I have different apple ids for my ipad and iphone - how do i sync so that the apps appear on both devices, e.g errands

I have different apple ids for my ipad and iphone - how do i sync so that the apps appear on both devices, e.g errands

If both accounts are authorised on the computer's iTunes that you sync them to, and the relevant apps are on that computer, then you should be able to sync them to both devices. The apps will be tied to the account that originally bought/downloaded them, so only that account will be able to download updates to them.
If you log into the other account on a device and re-download its apps onto them then you risk tying the device to that account for 90 days (and similarly redownloading on a computer's iTunes) : http://support.apple.com/kb/HT4627

How are businesses handling the "APPLE LOCK" on company cell phones when an employee leaves and their phone is unusable because the euipment was set up on the employee's personal Apple Account with their ID and password?

How are businesses handling the "APPLE LOCK" on company cell phones when an employee leaves and their phone is unusable because the euipment was set up on the employee's personal Apple Account with their ID and password? When an employee leaves a business and the company has purchased the equipment, the company should have the rights to reissue the equipment and Apple should provide an alternative to unlock the equipment from the employee's personal APPLE account and password so the company (that purchased the equipment) can reissue the line and equipment to another employee.

If you can prove ownership to Apple, they may be able to help you.
The best way of handing things would be strong policies requiring that the equipment be turned in in a usable state. i.e. not activation locked. Failing this, the employee should be charged the cost of the replacement phone. Held from their final paycheck if required.

My Apple Store lists prices in $ and not £ how can I change this?

My Apple Store lists prices in $ and not £ - how can I change this back to £?

Are you referring to the AppStore application, or to the Apple Store web-site? If the former, like Carolyn says; if the latter, then you need to go to http://www.apple.com/uk/
However, if the former then you haven't set up your computer for the UK, go into System Preferences and configure your region.

Can I use apple modem with ge keyboard and mouse?

can I use apple modem with ge keyboard and mouse?

Which Apple Modem is it exactly?
And why would/how could the Modem affect the Mouse or KB as you see it?

Mavericks will not sync Apple Contacts with Google, Linkedin, and Facebook?

I just upgraded to Mavericks. Here is what I find shocking...
1. Mavericks will NOT sync Apple Contacts with Google Contacts and vice-versa.
2. During the upgrade, Mavericks linked some of my Apple Contact cards with Google Contacts, but not all of them. It need to be clarified that linking is not syncing. Worse, it corrupted data, and deleted some of the contacts on Google Contacts.
3. Similarly, Apple Contacts will not sync with Linkedin or Facebook Contacts.
4. When I contacted Apple, Level 1 support had not idea and assumed that adding a Google Account with automatically sync Apple Contacts with Google Contacts as it did in OS Mountain Lion. Level 2 support did not have much of an idea either, but called me this morning to say that the matter has been escalated, and confirmed that OS X Maverick does NOT sync Apple Contacts with Google Contacts.
CAUTION before upgrading to Mavericks:
5. Your Google Contacts / Android devices will not be updated by Apple Contacts, and vice-versa.
6. Your Facebook / Linkedin contats will not be updated by Apple Contacts, and vice-versa.
The workaround:
7. Before upgrade, ensure that your Mountain Lion or earlier address book in synced with Google Contacts.
8. After upgrade, go to Contacts > Preferences > General > Default Account, and choose your Google Account as your default account. You will now add New Contact (or update existing Google Contacts) in Google Contacts, which your android devices can sync with. You will also see your Google Contacts in Apple Contacts. However, Apple Contacts will NOT sync with Google Contacts and vice-versa.
Welcome to Mavericks...

With all due respect @McFly_Marty, kindly do not mislead readers. As funny as it may sound, but you have been taken for a royal ride by Apple Support. Keep in mind that the tough taskmaster Steve Jobs, is no longer there, and it is no surprise that Apple’s innovations are sliding.
You probably have chosen Google as your default account under "Contacts > Preferences > General > Default Account”.
Now, when you add New Contact (or update existing Google Contacts) in Google Contacts, you will also see your Google Contacts in Apple Contacts. However, Apple Contacts will NOT sync with Google Contacts and vice-versa.
Try disabling your Google account in Apple Contacts, and all your new contacts are no longer in Apple contacts. Therefore Apple contacts is not syncing with Google Contacts.
Therefore, read the following from my original post again.
“1. Mavericks will NOT sync Apple Contacts with Google Contacts and vice-versa.
4. When I contacted Apple, Level 1 support had no idea and assumed that adding a Google Account will automatically sync Apple Contacts with Google Contacts as it did in OS Mountain Lion. Level 2 support did not have much of an idea either, but called me this morning to say that the matter has been escalated, and confirmed that OS X Maverick does NOT sync Apple Contacts with Google Contacts.
CAUTION before upgrading to Mavericks:
5. Your Google Contacts / Android devices will not be updated by Apple Contacts, and vice-versa.
6. Your Facebook / Linkedin contacts will not be updated by Apple Contacts, and vice-versa.
The workaround:
8. After upgrade, go to Contacts > Preferences > General > Default Account, and choose your Google Account as your default account. You will now add New Contact (or update existing Google Contacts) in Google Contacts, which your android devices can sync with. You will also see your Google Contacts in Apple Contacts. However, Apple Contacts will NOT sync with Google Contacts and vice-versa.”
Welcome to Maverick disaster...

Is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

Well it depends on the age. http://www.everymac.com/ should help you identify the age of the two models.
Apple may use two processors called i5, but newer models have different optimizations than older models.
The processor is usually not the main affect on speed. RAM helps, but barely unless everything is on an SSD already. Hard drive speed is usually the limiting factor of speed on computers. eSATA hard drives with higher RPM can often yield the fastest results because notebook hard drives tend to be slower that are not SSD, but for those you need either Express/34 or Thunderbolt based adapters.

I have problem to adjust my apple id with app store and before there was submitted another apple id?

I have problem to adjust my apple id with app store and before there was submitted another apple id?

settings->store change the appleID to what you want

When booting up get flashing apple folder with question mark and no sign, why?

When booting up get flashing apple folder with question mark and no sign, why? Computer will not open up. I have tried resetting the Pram. I can access the hard drive from another computer holding down the t key when starting up the Macbook Pro. What to do next?

The cable connecting the HDD to the logic board may be faulty. If the internal HDD can boot the MBP when in an external enclosure, that will confirm this issue. If not, the HDD may need to be replaced.
Ciao.

While i was updating my ipod touch it had an error and froze at the apple logo with a loading bar underneath.How do I fix it? Its stuck there, tried everything, turn off button home screen button even the volume buttons, nothing is working.

I was updating my ipod touch and the updation had an error and it froze at the apple logo with the loading bar underneath. How do I fix it? I tried the turn off button home screen button and even the volume buttons. I cant get anything to work. Please help me.

Connect to itunes and retore.

Apple TV with A4 chip and Quello

Forum,
I just upgraded my Apple TV with the A4 chip to the latest IOS which includes new channels like HBO Go, ESPN, and Quello. I am trying the one week free trial for Quello and I am noticing an issue with Apple TV. After playing content from Quello for about 30 minutes with no issues, Apple TV will just stop and reset itself (blinking white light) in the middle of the video. When it comes back on line, I resume what I was playing and within minutes it resets again. It appears to be a memory/buffer and/or processor issue because before it resets, the video gets slightly out of sync or skips and sometimes the audio goes mono. It is not my wireless network or my ISP as I have plenty of bandwidth from both the Internet and from my router to my Apple TV. This only happens with Quello not with anything else (HD movies, HD TV shows, music, etc).
Any thoughts/suggestions or is this a new issue Apple needs to be aware of since Quello is new content for Apple TV?
Regards,
JB

Same problem here... 9 out of 10 times the Qello app just kills my Apple TV and I have to restart. When the Qello app doesn't crash out the AppleTV it usually pixelates and has poor audio performance.
I have 20MB/sec internet access, the Apple TV is hardwired (no wireless) and my routers firmware shows that I'm not having any connection issues and should have plenty of bandwidth.
I think the issues are probably two fold... one is the Application itself is obviously buggy (suprised Apple didn't find this in any Q/A testing) but beyond that it looks like the service isn't setup to serve up the bits at the rate needed.
Too bad, I like the service but I'll be cancelling ASAP.

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Verity Error - Not letting user search with words NOT,AND,OR, etc. Why??

I've meticulously created collections of the music on my ecommerce music site. I am manually stripping off offending characters in the submitted search criteria with this code:
Trim(REReplaceNoCase(URLDecode(URL.searchcriteria),"[()<>##""'@]"," ","all"))
Then, if the user has ticked for an "exact word" search, I'm adding double quotes around it, otherwise, leaving it without. Then submitting it to the right collection for a search with this code (I've substituted ZZZ and XXX for my protection).
<CFSEARCH NAME="ZZZ" COLLECTION="XXX" type="simple" CRITERIA="#cleanedcriteria#" maxrows="300">
When a user does not tick "exact match" but types in any phrase that includes any of the Verity operators, they get the following error:
If you are using type="explicit", you must use Verity Query Language operators such as "<WORD>" or "<STEM>", or surround your search term with quotes. See the documentation for details.
Pass Me Not
will throw the error. but
"Pass Me Not"
which is passed when someone ticks "exact match" does just fine.
From what I've read, the simple search is supposed to assume the <WORD> and <MANY> operators, but it's like that's being ignored. What am I doing wrong, and/or how can I configure this so that my users can type terms, submit, and find what they're looking for?

I think I finally understand, and am posting the solution here for others' benefit.
Apparently the simple search is in fact behaving properly and will recognize AND OR NOT as operators instead of part of the search string. The work around for this is to enclose those words in double quotes. So that's what I've done. If the user has not specified an "exact match" search (where I enclose the entire string in double quotes), then I single out these three words and put double quotes around them. It appears to work beautifully.
QED, and am happy to have had a complete uninterrupted discussion with myself.
<cfset cleanedcriteria = ReplaceNoCase(cleanedcriteria,"and","""and""","all")>
<cfset cleanedcriteria = ReplaceNoCase(cleanedcriteria,"not","""not""","all")>
<cfset cleanedcriteria = ReplaceNoCase(cleanedcriteria,"or","""or""","all")>

I kept having errors on my Apple ID with frostycup=1 and STATUS_CODE_ERROR. How to troubleshoot them?

Similar Messages

Maybe you are looking for