I know how to make firefox 12's tabs go to the bottom, but even so they still dont look exactly as they did in 3.6, how do I make them look exactly the same?

Considering a few websites stopped working for me seeing as I was still using 3.6.X, I reluctantly decided to finally upgrade today, and it automatically upgraded to version 12. Needless to say, I wanted it to look exactly as it did in 3.6.26, and I spent a good portion of the day tinkering with various add-ons and the like to get things back the way they were. One thing is still bugging me though, the tabs, which I managed to get to the bottom of the screen, still dont look exactly as they did. There used to be a small dividing line between the tabs and the actual page, and the + on the new tab button was smaller (and I know this all seems rather picky, but it does bother me). And while I'm at it, is there any add-on that will give me the same back/forward, X, refresh, and home icons as 3.6.26? Any help is greatly appreciated. Thank you.

Try this extension for the button:
*Classic (Small) Toolbar Buttons: https://addons.mozilla.org/firefox/addon/cstbb/
It should be possible to get the needed modifications.
You can check out this MozillaZine forum thread and ask there for advice about how to tweak the user interface.
*http://forums.mozillazine.org/viewtopic.php?f=7&t=2057009

Similar Messages

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

I have a iMac desktop and a macbook pro laptop I work mainly on the desktop but when i go away for work I take my laptop. Is there any way to make it automatically back up to mirror my desktop? Like when I update a file it updates on there too etc?

I have a iMac desktop and a macbook pro laptop I work mainly on the desktop but when i go away for work I take my laptop. Is there any way to make it automatically back up to mirror my desktop? Like when I update a file it updates on there too, if I install software it installs on there too etc?
When I first got the laptop I syned it to load with all the same software etc but it hasn't continued to sync
Thanks

I use
Chronosync (http://www.econtechnologies.com/pages/cs/chrono_overview.html)
and
Dropbox (https://www.dropbox.com/)
Both work very well. The former I use for manual, one-way synchroniziation of (nearly) entire systems. The latter for automatic syncing of very active directories through local and shared online storage.

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

I don't actually have an answer for you, but ditto on changing things that aren't broken. Drives me crazy!!

The bottom part of my iPod Touch screen isn't responding but I can slide to unlock the screen and slide the icons at the bottom but I just can't click on them, anyway to solve this?

The bottom part of my iPod Touch screen isn't responding but I can slide to unlock the screen and slide the icons at the bottom but I just can't click on them, anyway to solve this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Upgrading from an iPad1 (os 5.5.1) to iPad Air. I want to still use the original, but want to transfer my iPad 1 stuff to my new iPad. Do I restore (doesn't that also restore the old os?) or set up as new?

I'm ipgrading from an iPad1 (os 5.5.1) to a new iPad Air. I want to still use the original, but want to transfer my iPad 1 stuff to my new iPad. Do I restore (doesn't that also restore the old os?) or set up as new?
Also, every time I get a new device and transfer stuff from the old, I wind up with no folders. How can I avoid that this time?
Thanks in advance!

Make a backup of your old iPAd to itunes or iCloud.
Then restore from that backup when setting up the new iPad Air.
The restore will put your data onto the new iPad. (The Os will remain at 7).
Folder structure is a little iffy. Since backups don't restore Apps, only data, you would still need to re-download the Apps to the new Air and as such would need to create the folders for them.
Apple wrote:
iTunes will back up the following information
Camera Roll (Photos, screenshots, images saved, and videos taken.
Note: For devices without a camera, Camera Roll is called Saved Photos.
Contacts* and Contact Favorites (regularly sync contacts to a computer or cloud service such as iCloud to back them up).
Calendar accounts and subscribed calendars.
Calendar events.
Safari bookmarks, cookies, history, offline data, and currently open pages.
Autofill for webpages.
Offline web application cache/database.
Notes.
Mail accounts (mail messages are not backed up).
Microsoft Exchange account configurations.
Call history.
Messages (iMessage and carrier SMS or MMS pictures and videos).
Voicemail token. (This is not the voicemail password, but is used for validation when connecting. This is only restored to a phone with the same phone number on the SIM card).
Voice memos.
Network settings (saved Wi-Fi hotspots, VPN settings, network preferences).
Keychain (this includes email account passwords, Wi-Fi passwords, and passwords you enter into websites and some other applications. If you encrypt the backup, you can transfer the keychain information to the new device. With an unencrypted backup, you can restore the keychain only to the same iOS device. If you are restoring to a new device with an unencrypted backup, you will need to enter these passwords again.)
App Store Application data (except the Application itself, its tmp and Caches folder).
Application settings, preferences, and data, including documents.
In-app purchases.
Game Center account.
Wallpapers.
Location service preferences for apps and websites you have allowed to use your location.
Home screen arrangement.
Installed Profiles. When restoring a backup to a different device, installed configuration profiles are not restored (such as accounts, restrictions, or anything which can be specified through an installed profile.) Any accounts or settings that are not associated with an installed profile will still be restored.
Map bookmarks, recent searches, and the current location displayed in Maps.
Nike + iPod saved workouts and settings.
Paired Bluetooth devices (which can only be used if restored to the same phone that did the backup).
Saved suggestion corrections
Trusted hosts that have certificates that cannot be verified.
Web clips.

I tried to log on my new ipad and forgot the password combination. Due to several tries the ipad is locked up. I remembered the password but my ipad is still disabled. How do I get it going again?

I tried to log on my new ipad and forgot the password combination. Due to several tries the ipad is locked up. I remembered the password but my ipad is still disabled. How do I get it going again?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Wrong passcode results in red disabled screen
This will tell you how to restore
iTunes: Backing up, updating or restoring iOS software
If you cannot restore that way, you may have to use recovery mode
iPad: Unable to update or restore

TS1367 my mac book air opens to the password but won't go any further it stop right there! What soulh I do? I am sure I have the right pass word!

My Mac book air opens to m the password but won't go any further, it stop right there! what should i do? I am sure i have the right password

Here's an old fix for the problem. Don't know it applies now:
Clearing Caches to Fix Login Problem
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
/sbin/fsck -fy
Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
cd /System/Library/Caches
rm -r *
reboot
Press RETURN after each command.
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
If it isn't applicable in your version of OS X, then I suggest:
Be sure you backup your files to an external drive or second internal drive because the following
procedure will remove everything from the hard drive.
Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

I have totally forgotten my answers for the security and when i try to reset them by using the tutorial it says there should be a reset button at the bottom but there isn't one, please help

I am trying to but something on the appstore but since i had forgotten the answers to my security questions i am not able to do so.
I have tried resetting the questions by using tutorials but it says there should be a reset option at the bottom but there isn't one, what do I do?

Per the following, if there is no link to send a reset email then you need to contact Apple Support: If you forgot the answers to your Apple ID security questions
Apple Support: Apple ID: Contacting Apple for help with Apple ID account security

I cannot open my iphoto application. The minute I double click on the icon I get the rainbow which spins forever. I've used Applejack to repair the hd, but even that didn't work. I've getting into iphoto preferences..can't. Help!

I cannot open my iphoto application. The minute I double click on the icon I get the rainbow which spins forever. I've used Applejack to repair the hd, but even that didn't work. I've getting into iphoto preferences..can't. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

HT2493 I downloaded Maverick and when done noticed that the "BURN" icon for my cd/dvd burner is missing. Where did it go and how do I get it back?

I downloaded Maverick and when done noticed that the "BURN" icon for my cd/dvd burner is missing. Where did it go and how do I get it back?

In a Finder window, right click on the window's tool bar, select Customize, and drag the Burn button to the tool bar.

I want to download an app, but i can't because i have forgotten my security questions. Is there a way to change them without needing the old ones?

I want to download an app, but i can't because i have forgotten my security questions. Is there a way to change them without needing the old ones?

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103535)

I have an IMac desk top. Safari icon is down at the bottom, but nothing happens when I click it. How do I open safari. Was working fine earlier.

I have an IMac desk top. Safari icon is down at the bottom, but nothing happens when I click it. How do I open safari? Was working fine earlier.

You are in the iPad forum.
Open your Applications folder - find Safari in the applications, and double click on the icon in there. You may have a corrupt alias in the dock at the bottom.

Can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

Hello mate!
Are you sure u have the option on the up-right side of the arrange window checked to x-fade?

I know how to make firefox 12's tabs go to the bottom, but even so they still dont look exactly as they did in 3.6, how do I make them look exactly the same?

Similar Messages

Maybe you are looking for