I know it has been asked...how do I export audio soundtrack to Powerpoint

This is totally hosing me right now. Any suggestions? I have never found an answer that works when I am having to use a PC to open an imported KN presentation that I have turned into a powerpoint.
Thx

What's selected there now? Whatever it is, select it again, and the window to allow you to change will open.
Regards
TD

Similar Messages

  • How can i increase the height of the navigation toolbar to make my persona more visible? adding toolbars puts them all below the navi bar and it looks weird. i know this has been asked many times but the answer's always "add toolbars".

    How can i increase the height of the navigation toolbar to make my persona more visible?
    adding toolbars puts them all below the navi bar and it looks weird.
    i know this has been asked many times but the answer's always "add toolbars".

    Look here.
    http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search

  • So, I know this has been asked before. But, has anyone heard from Apple?

    So, I know this has been asked before, but I'm just looking to see if anyone had heard from Apple on this at all. The minimum volume on my iPod Classic 160gb is too high, and I can't lower it. (AKA when I kill the volume, I can still hear music).
    I called them today, but the rep was pretty useless. He even dropped the "well, just press pause" line on me. Took him a while to understand that when I'm in bed or studying, etc. the minimum volume is too loud, and I wanted to be able to set it lower.
    The best workaround I've found so far is to buy headphones with their own volume control, but I just can't help but feel that someone shouldn't have to by additonal gear after buying this thing on account of such a basic feature exclusion.
    Anyways, thanks for any help !

    Wow, easy there company boy!
    I've heard all of what you spit up before.  And for your point of "Well, in several cases, people have complained (here in these discussion pages), that they expect the volume to be zero when turned to minimum position" that kind of ties in to why Apple should fix this.
    And yeah....it's pretty much a given that "you and I have different interpretations of what constitues too loud" This is where the option to adjust the minimum volume comes in to play.  (I relly feel bad for you. Honestly. Having to live everyday of your life this way must be just brutal)
    The wording would be pretty simple too. " Be aware there are many instances of the minimum volume being too loud, so think twice before dropping a few hundred bucks on this"
    And, you're right. It is horrible to 'whine' about being ripped off and asking if there is a possible fix for the issue. I really do apologize for that. I should just suck it up and not voice my opinion that this is not fair to consumers, and Apple shouldn't fix a known issue with a product.
    I did reset & restore, I figured that was pretty much implied since I said I spoke to Support.
    And I am not at all surprised that you would say "I - for one - am not surprised that Apple might say, "simply hit the pause button"."  Again, I don't want it on muteReading your post made my eye twitch at least three times.
    This is exactly the reason I was resitant to post on a forum. But, I got a good laugh anyways. Thanks guy!

  • I'm burning dvd's that won't play on a regular dvd player.  What am I doing wrong?  Are there some simple things to check to figure this out?  (Sorry, I know this has been asked many times)

    I'm burning dvd's that won't play on a regular dvd player.  What am I doing wrong?  They play fine on computers but not on dvd players.  Are there some simple things to check to figure this out?  (Sorry, I know this has been asked many times).  Created in DVD studio pro.

    Hi
    Just my thoughts to add to the excellent answers above.
    • BRAND of DVD used - Matters when doing Video-DVDs
    Memorex, NoName etc cheap brands usually do NOT work
    I only Use Verbatim (more organic dye in these)
    • Type of DVD - matters
    - DVD+/RW - usually results in problems
    - DL-DVDs are more problematic than SL-DVDs
    - DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
    I only use DVD-R
    • BURN SPEED - matters
    - Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
    I set this down to x2 or x4 max.
    Yours Bengt W

  • I know this has been asked before But I Deleted 6 mths worth of Bookmark folders, Cant use Undo,

    I know this has been asked before But I Deleted 10 mths worth of Bookmark folders, Cant use Undo & havent backed up (live & learn) Someone posted do a restore from "Import & Backup" My listing in Restore is only 2010-6-29 back to 2010-6-22. Is this the way to go to retrieve as much as possible or is there another solution?

    Those dates are when a backup was automatically made by Firefox, not dates when you saved specific bookmarks. Try restoring the backup from the day before you deleted all those bookmarks. It will restore the entire backup file - not just what you deleted, you will lose any bookmarks that you saved after the date of the file you restore.
    [https://support.mozilla.com/en-US/kb/Lost+Bookmarks]

  • Ok I know it has been asked a million times.. but I am du

    Hi, I know it has been asked a million times, and I have read over the posts, but it still is not helping me. I installed the program on my computer when I first got my MP3 player (a Zen Micro) and I no longer have that computer, or the CD. I have looked over the download pages, and all I am finding are upgrades and stuff. Can someone please help me?
    Thanks a bunch!!
    -Kellie

    Get everything you need from here.
    PB

  • Contact Form - I Know this has been asked before. . .

    Hello
    I know this question has been asked before! But even searching the forums hasn't got me the direct answer i am after.
    I need a 'Contact us' form on a website and i have come across posts with people who have got part way with one and needed help - but i need one from scratch. .
    I have been told by 11Mystics that 'VaskGirl' can help me with a tutorial she has??
    All help will be greatly appreciated. . .
    Thanks

    I have been told by 11Mystics that 'VaskGirl' can help me with a tutorial she has?? [sic]
    "Varkgirl"
    http://iweb.aardvarkland.com/
    Mark

  • I'd like to go back to a specific date in my messages? I know this has been asked billions of times.

    (Specifically April 30 of 2013) but I text a lot so pressing "load earlier messages" isn't an option. Is there anyway I could load the messages on my computer, or is there an app that I could use to search by date? I could get them off my iphone or ipad.

    Hi,
    The iPhone (iOS Device) and the Mac will only Sync from the day that both start using the same App ID or OS X 10.8.2 whichever is the earlier.
    The "Sync" as Apple calls it was different before this time.
    The "Sync" is only "Display on all Devices" and does not involve anything else (if you delete a message on one device it remains on the other)
    The iMessages are "pushed" at the devices that have the Apple ID or iPhone number and when the iMessages has been sent that is it.
    It will not re-sync if you remove the iMessage.
    I really don't use iMessages on my iPhone enough to even try "Load earlier Messages".
    If you have synced (Backup) the iPhone onto the Mac using iTunes it is apparently possible to extract the messages from the Backup.
    However I don't sync this way and  don't know the names of the apps involved.
    9:06 pm      Wednesday; February 19, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Not to belabor the issue, as I know this has been asked befo

    Is there an aftermarket charger that people agree works with the Zen V? I had looked at the Gomadic and Boxwave models, but still cannot seem to find a consensus as to whether they actually work.
    I have an old USB charger from RIO Carbon I had. It's output is 5v, amp, but it does not seem to work. Nothing semed to happed. A bit later the player died. Not sure if the two were related.
    Thanks, RALPH

    Well I ended up getting the PowerMac Dual 2.5 from my friend. The local tech support guy told him the processors when out on the unit and he decided to get a new one. This unit sat in his basement I would say a good couple months packed away. After he gave it to me last week I plugged it in with not much hope. However, to my surprise it actually powered up and has been working great now! It has not given me a single issue. I even purchased Techtools Pro and ran the tests and everything came back pass.
    Now, the only thing that concerned me was when I turned it on for the first time. I heard a slight gurgle noise that came from the liquid cooling. It lasted about half a second and I have not heard it since. I pulled the cover off of the processors and looked for signs of leaking. Everything looked clean (no signs of corrosion). However, the mosre I am using this unit, the more I am liking it. Now I am starting to get worried in the back of my mind that a leak could be there and I would like to prevent any damage.
    Is it fairly easy to remove the cooling unit and do a better inspection? I am sure there is people how mapped out detailed instructions on how to do this. However, I was just wondering form someone first hand if this was not that hard. Nothing more then patients and common sense?
    Thanks again

  • "no un-bridged adapter" - and yes, I know this has been asked many times before :)

    OK, so I installed vmware workstation 10 on windows 8.1 update. I got the above error. "No problem" I thought, and followed the community and googled advice, I:
    1) uninstalled vmware
    2) disabled my antivirus (Kaspersky)
    3) ran the installer "As administrator" (I'm a member of the local administrators group, so hopefully anything else that doesn't require elevated permissions would be OK)
    Result: Virtual Network Editor does not show VMnet0, but I see it in C:\ProgramData\VMware\netmap.conf
    #This file is automatically generated.
    # Hand-editing this file is not recommended.
    network0.name = "HostOnly"
    network0.device = "vmnet1"
    network1.name = "NAT"
    network1.device = "vmnet8"
    network2.name = "VMNet0"
    network2.device = "vmnet0"
    Looking at the properties of my network adapter (Intel(R) Ethernet Connection I217-LM) I see the vmware bridge protocol and the vmnetbridge service is running.
    So next I try the "restore defaults" in the network editor - no change. I try removing the protocol from the adapter and I get error 0x80070005 but if i click OK and go back into the properties, it's gone. I can't add it back, because I'm told it's marked for deletion. So I reboot, try to add it, and I get access denied, but again if I close the dialog, and go back, the service is now there.
    I'm just in a workgroup and i have not applied any Group Policies...
    Happy to try any suggestions...

    Uninstalling AntiVirus and or EndPoint Security software has been discussed a considerable number of times and has been discussed for many years and uninstalling any given AntiVirus and or EndPoint Security software is SOP when dealing with some issues with VMware Type 2 Hypervisors, especially when there are Network related issues.  At times both Avast and Kaspersky as well as others have been mention in these forums and at times in the product release notes too.

  • I know this has been asked before but how can i put dvds on my ipod

    how can i put dvds on my computer and or save them to it any help apreciated
      Windows XP  

    To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
    To get started: http://www.videora.com/en-us/Converter/iPod/
    If you have questions: http://www.videora.com/en-us/Converter/guides.html
    If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
    Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
    GFF

  • I know this has been asked before, but still can't work out how to merge a split album

    I've read all the guidance, but can't even find the buttons to push! 
    I am using the latest itunes for windows
    Thanks,

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • I know this has been asked before...

    After about nine months, my Northbridge chipset fan has gone from simply noisy to an irritating vibration.  I know that the Zalman Fanmate 2 will slow it down to 5000 rpm, but it sounds like the fan is on its way out.  I'm reluctant to spray it with WD 40 because I don't want to remove the fan unless I'm going to replace it.  I did e-mail tech support at MSI and they probably will send me a new fan.  What are some other good aftermarket options?  I appreciate any advice that people can offer.  BTW, other than the fan, I've had no problems with the board, which is about as good as you can get without going to SLI. 

    Will it fit on the Neo-4 Platinum?  It seems to me that I have a few options here:
    (1)  Buy a Zalman Fanmate 2 and turn down the fan.  It used to run regularly at 7,670 RPM, but lately, it's running at 8,000 RPM+ and is rattling things.  Yet, Speedfan says the temp of the Northbridge is 17 or 18C, so it's not overheating.
    (2)  Buy a general four channel fan controller.  I like the Zalman that fits in the 3.5 bay, but my case has a plastic door that closes, so I may need one with just push buttons.  Any advice on that is appreciated.  The problem with that idea is that the back fan is a 120mm Antec Smartcool and the front is the Antec 120mm that came with the case set on medium.
    (3)  Buy a Vantec Iceberg copper heatsink and fan, some Arctic Silver 5 and the Arctic Silver clean kit, pull the motherboard out (next time I get the case with a removable motherboard tray) and install it.
    (4)  Buy this(http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=872908&CatId=99) or (http://www.quietpcusa.com/acb/showdetl.cfm?&DID=8&User_ID=760103&st=7443&st2=-49144413&st3=35057438&Product_ID=91&CATID=5), cut some pins off with my Dremel Moto-Tool and install.
    (5)  Buy this (http://www.quietpcusa.com/acb/showdetl.cfm?&DID=8&User_ID=760103&st=7443&st2=-49144413&st3=35057438&Product_ID=359&CATID=5), cut some pins off--probably still won't fit though--and install.
    My video card just clears the Northbridge but probably can be worked around.  Next to it I put an Antec blue LED cyclone blower to help keep the card, and the system, cool.  On high, it's still not that loud.  Even with two 120mm Antec fans, the system still hits 41C during gaming.  Thanks for the advice so far guys.

  • I know this has been asked several times but I never saw an answer,

    What can you do if you get this error:
    Podcast was not copied to ipod because it cannot be played on this ipod.
    I am using the latest firmware upgrade and itunes. I bought my ipod touch last week so it already had the January upgrade.
    I changed all to acc format. Then reversed the unicode on the ID3 tags Like a Apple herlp screen suggested. I reset the ipod and then restored. Can any one else give any other suggestions.

    Hi Clamo!
    Well, I think I know what's your problem. If you donwloaded this podcast from iTunes Store, then you can only sync it to your iPod, if the Podcast has the perfect format for iPod! So you can't sync HD Podcasts or Large size... You need to download iPod size podcasts or over the correspondent "Convert Selection to iPod/iPhone". Then, you'll be able to sync it with your iPod Touch

  • Ok I know this has been asked before but....

    OK AFTER I MADE MY OWN RINGTONE AND THEN DRAG IT OVER TO MY IPHONE....I SEE IT IN MY RINGTONE FOLDER BUT IN THE IPHONE UNDER SETTING IT DOESNT SHOW AND I ALSO HAVE TWO OF THE SAME RINGTONES THAT WAS ALREADY THERE!!!!
    IM TOOOOO LOST I BEEN FOOLING AROUND WITH IT FOR LIKE 3HR NOW TRYING DIFFERENT THINGS....WHAT AM I DOING WRONG??
    PLEEEEEEASE HELP!!

    Well since the only official way for ringtones is to buy them, it is hard for us to help you since you really didn't tell us how you tried to circumvent the only officially supported way.
    And as mentioned, turn off caps lock.

Maybe you are looking for