I know my passcode but i put wrong 6 time, now its say connect to itunes ?
on my iphone 4s .i know my passcode but i put wrong 6 time, now its say connect to itunes . what i gonna do?
See: Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Similar Messages
-
put in updates and now is asking for passcode ive been putting wrong one in and now its disabled
recovery mode
open itunes on computer
plug cable into computer not phone
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
please help!!!!! i dont want to loose all my data, cant itunes please send it to me?
As user Wjosten previously replied to another user with that problem:
"Then you'll have to force the phone/touch into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still dont see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new." -
Someone put my iphone passcode in wrong to many times and now it says connect to itunes there is some stuff on my iphone which i havent backed up and i will loose if i restore my iphone what do i do?
If the phone is disabled, you have no choice but to restore it. You will lose the data that was not backed up.
the passcode did its job exactly as it was supposed to do. -
I restored and updated my iPod, but when I turned it on, it still says connect to iTunes
My brother just got an ipod for Christmas, and we told him not to put a passcode on it because he would forget... but he did it anyways and he did forget! He ended up disabling it trying to unlock it. It said ''Connect to iTunes." When I connected to iTunes, it said it was disabled and needed the passcode to do whatever, but I held the top button and the home button down for ten seconds to Restart it because we don't know the passcode! It said to Restore and Update, so I did that. Now it's in Recovery mode... and I can't get past that part! I thought I had done it right, but when it turns back on, it still says connect to iTunes! Help??
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
When I got my ipod I made an account with iTunes right from my ipod.Yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered on the computer. I've tried holding the home and sleep/wake button for 10 sec and then only the home for 5sec and that might have reset it, but it didn't help. If any of you guys know what to do so I can unlock it I would appreciate it VERY much.
If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
Follow the instructions here: iPhone and iPod touch: Unable to update or restore -
Just installed new update to phone 5s this morning, now its saying plug into itunes but itunes doesn't recognize device.
when the files were being extracted my pc stopped any idea of a fix?
or can i remove the update from the program files and re-download it for my phone to be functional again?Hello giz mckenna,
The article linked below details a number of steps that can help get iTunes to recognize your iPhone.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/en-us/TS1538
Cheers,
Allen -
iphone 4s is disabled. It says connect to itunes. Itunes ays could not connect because phone is locked with a passcode and to enter passcode on iphone before it can be used with itunes, but I can't enter the passcode because 1) don't know it 2) it's disabled. The device also does not show up in itunes, so how can I restore the phone or unlock it?
Same answer as last time you asked the exact same question:
HT1430 Iphone 4s says disabled connect to itunes and itunes won't connect because phone locked with a passcode. I don't have the passcode to unlock the phone -
HT4993 attempted the wrong code to many times now oys saying log into itunes
Attempted wrong code to many times now its satingblog into itunes
The following has instructions: http://support.apple.com/kb/ht1212
-
Trying to update to IOS 5 but having problems - the iphone now wants to connect to itunes (picture on screen) and when connected to laptop via usb iphone not recognised (ie might as well be unconnected!) - help! If I reset the iphoneit comes back to the picture screen requesting connection to Itunes!
adamea5 wrote:
I'm assuming since my internet is down itunes loaded on the desktop will not recognize the device even though the phone is connected through a USB.
That is an incorrect assumption.
Device not detected in iTunes -
I wanted to update version 4.1 to 4.3 but when i did it then the message came to restore it i also restore it then loading started and it was completed more than 75 % but then it gave an error of 1015. then i unplugged iphone and turn it on but it showed to connect with itunes i again connect it with itunes but it chowed again came message to restore i again did it but error occurs ?
You can't update to 4.3 any more. It's no longer signed by Apple.
The error you cite (1015) is indicative of jailbreaking or otherwise modifying the phone.
You can not get help here per the Terms of Service.
Try google or elsewhere or buy a phone you can use. -
help me
You could always restore your iPod and redownload all your itunes items to your ipod. No biggie.
-
Hi I have a itunes logo on screen and asking me to connect, i cannot charge the phones, switch one either can anyone help
You'll need to connect the iPod to your iTunes library in recovery mode using the instructions in this Apple support document.
http://support.apple.com/kb/ht1808
B-rock -
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
my ipad is locked and its saying connect to itunes which i have done and on itunes its saying ipad can not connect because its got a passcode but i cant type the pass code in because its locked what do i do
You need to follow the instructions in the second half of that page
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
So you need to click on the 'If you have never synced your device with iTunes, or you do not have access to a computer' heading and follow the instructions underneath it
Maybe you are looking for
-
I have also experienced the blue screen of death when working on my iPhone 5S in iWork. I HOPE this is an iPhone issue and not an iOS7 issue, as that will afffect my iPad 3 as well. It seems there is no fix for this>
-
How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow
Dear Experts, I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP. The registered domain name is e.g. contoso.com. a. What should I u
-
Hi All, Exploring KeyStore functionality to be implemented in File Adapter. As per the info, SOAP , Mail adapters support this functionality. Pls let me know whether the KeyStore functionality can be implemented in File Adapter using EJB or any other
-
Using my Treo 650 to connect to internet
Is there any Vista compatible software available so I can connect my Treo via USB to my laptop and allow the laptop to connect to the internet? I used to have this feature with an older laptop using an older Motorola cell phone. Was wondering if ther
-
GR quantity for movement type 101 not updated in PCA
Hi, Does anyone have an idea why quantity is not updated in GLPCA-MSL for 101 movement type?. It has updated in FI (BSEG-MENGE) but not in PCA (GLPCA-MSL). Appreciate prompt response. Thanks, Rashmi