I KNOW THE BEST SETTING FOR "HANDBRAKE" !!!!!!!!!!

Hi all Brendan here!
I have to say this handbrake thing was very frustrating at the start, but with alot of trial and error, I have all the settings fine tuned!!!
From DVD movie to iPod!
You can trust these settings!
File format: Mp4 file.
Codecs: MPEG-4 Video/ACC AUDIO.
In AUDIO, change only the sample rate to 48000.
Encoder: FFmpeg
Average bitrate: 700
Framerate: 29.97
These are the only settings you need to be sure of, to
have concious free ripping.
Other then that you need to change the Picture Settings
to 320 by 192(for this turn aspect ratio off). Then you need to adustust the left & right in crop, tick the custom icon & then add about 30 onto both left and right sections in crop,(this may result in figures no matching, but as long as the picture looks good things will be ok).
I hope this has helped one and all.......Bren!

I have done 15 tests and i'm telling you....there is no diff in quality between h.264 & mpeg4. After all the I pod cannot use the full potential of h.264 & it takes over 2 times longer to rip!
There are differences if you examine the videos side-by-side in a magnified or zoomed in context and compare the file sizes produced. (Or try taking the iPod output and upconverting it for HD display.) The only question is "do you care about these differences?" On an iPod screen the differences are likely to be less than discernible. To give the same gradation of color transition or texture to objects, an MPEG4 file requires 3-4 times as much data as an H.264 file. If time is more important than storage space, then use MPEG4. If storage space is critical and you have plenty of time to spend on the conversion process, then use a high quality, high compression, multi-pass H.264 format.

Similar Messages

  • What's the best setting for a best shades quality?

    Hi!
    I would like to know what are the best codec and the best setting for a video with 1920x1080 of resolution.
    I've tried them all but nothing because the shades...are not shades.
    I want a video that is like a uncompressed video but lighter. Same quality, same shades.
    I've tried with Canopus Lossless but the video is darker and huge (7 min for >17 gb),
    then with Canopus HQ, same quality but a little bit lighter (6 gb),
    I've tried with all of codecs and settings but I haven't found what I want.
    Who can help me for the best settings for the best shades?
    Thanks so much.
    P.S: Sorry for my english!

    I used the PNG codec but the video is too big.
    New Question:  I've tried to encode the video with Canopus HQ but to 720p and now the video is more lighter, I wanted to upload it on YouTube but is not compatible with the standards.
    If I encode this video by changeing the codec to Microsoft Avi uncompressed, can I have the same quality and the same weight?

  • What is the best setting for export movie in widescreen format?

    Please tell me what is the best setting for exporting movie in Widescreen format?

    Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
    Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
    Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
    However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
    bogiesan

  • Can anyone help me with getting the best setting for me system

    can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help  

    my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
    i wouldnt be too concerned...those temps are pretty low to begin with.

  • What is the best setting for compressing to a Window Media Player?

    I now have the latest Compressor, just now need to figure out which is the best setting to use for compressing to a Windows Media Player. Does anyone know which is the best method?

    I'd propose you buy a licence for Telestreams FLip4MAC (flipfactory) Quicktime components to enable ENCODING for HD and SD as you need. It works ok however none of my work requires specifics for windows player. I have a licence just the same.
    If you have Flip4mac already installed, you can use the system preferneces  panel to order a an ENCODER component licence. There may be others around as well.
    You can just use compressor.app and change the inspector video to use "quicktime components/windows media encoder" in the batch job.. its pretty easy.
    hth

  • What is the best setting for exporting an HD sequence as DV?

    I want to make sure that my end product is the highest quality and for some reason I don't think I am getting it. when I play it on my big screen, it doesn't look sharp.
    I am doing a project weekly that has 3 movies; one is nothing but pictures trasitioning to music. The second is a corporate TV 30 second spot that I converted to a .mov file (it came to me as a super huge .wmv file). The third is high def with photos to music.
    For some reason, when I put all three in the same time line, it freezes FCP. (I guess that is another thread....) So I am doing all three in separate timelines, then bringing them all into DVD Studio Pro.
    I do the clips 1 and 3 in HD, but have to export them as apple pro res 422 1280x480 30 because if I go "current settings", it makes it a HD .mov. The reason I don't want this is because in DVD Studio, I can't have 2 HD clips and 1 that is not. (I posted that problem in that forum and figured out that was the reason why the DVD wasn't playing)
    So my question: am I down grading this HD sequence the best way? Here are the sequence's settings:
    frame size: 1440x810
    pixel aspect ratio: hd (1440x1080)
    field dom: Upper (odd)
    editing timebase: 29.97
    Quicktime Video setting: compressor hdv 1080i60
    Also, the fact that a 7 minute movie is only taking 10 minutes to render makes me nervous.......
    Thanks in advance!

    Aubry,
    why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
    G.

  • Need to know the best practice for converting string to double

    I have a string and want to convert to double if it is a valid number, else want to keep as it is. There can be couple of ways doing it and I want to know which one is best if I have lots of strings, specially from performance point of view.
    1) Use Double.parseDouble(myString) and catching Number format exception to detect it is not a number. One of my colleague said it does not give good performance because of exception catching,
    2) Use of org.apache.commons.lang.math.NumberUtils.isNumber() and if it is true then only parse it - so don't rely on exception.
    I did some performance testing - putting it in a loop and trying out for 2 scenarios - one loop for proper numeric value string and another for non-numeric. What I found out was if strings are not proper then parseDouble() is taking long time (because of exception catching) and in that case using NumberUtils.isNumber() makes sense.
    Would like to hear expert views on this.
    Thanks
    Manisha

    If you need it as a double you must convert it to a double and catch the exception. This means that testing it first is a waste of time in the case when the test succeeds - did your colleague think of that?
    Catching the exception is possibly slower than the test. Whether this is significant depends on the relative timings of the test and catching the exception, and also on the expected error rate. If this is below about 40% I suggest your colleague is talking through his esteemed hat.
    And of course the best test by far is the conversion itself. Using any other test runs the risk of its rules being different from those applied by the conversion.
    In any case you are obliged to write the code that catches the exception. You're not obliged to write the pre-test code.
    My personal rule for efficiency is to minimize lines of code until hard evidence to the contrary proves that further improvement is required.

  • What's the best setting for iPhone 4s video in Final Cut Pro 6

    What's the best project setting in Final Cut Studio 2 for iPhone 4S 1080p footage?

    Hi,
        Convert your clips to Pro Res (LT if you have FCP7) with MPEG streamclip or similar and import to FCP.
    Drag the first clip to the timeline and click ""yes" on the message that asks if you want to "change sequence settings to match clip settings". You're all set to edit.
    DM

  • Is anybody tell me which is the best setting for firewall, Flash player, safari and other applications  to protect my mac from risk

    what are the best setings to protect from risks

    Hi.
    I've been a Mac user since the days of the Mac Plus, about 1986.
    It's been my experience that the system defaults are generally enough to keep your Mac safe.  I know there are going to be others who will swear up and down that you HAVE TO do more... but the setup that ships with the newest Macs is pretty d*mn good.
    The best thing you can do to protect your machine is practice a little self control.  By that I mean, just follow some basic rules when your on using the machine and the internet.
    > Don't download files or apps from untrusted sites... sites you don't know.
    > Don't allow an application to install itself if you didn't initiate it. (This is how a trojan would infect a machine.)
    > Don't click on links in your e-mail if it's from someone you don't know.
    > Don't share your user IDs and passwords with others.
    > Install and use an anti-virus (Kaspersky, Symantic, et al).
    > Use Software Update regularly.
    There are other basics that you should keep in mind when using your Mac, and I'm sure others can add to this.
    Most of the issuse that people have when using Macs is because they don't use common sense... not because their machine has been hacked or attacked.
    OS X is pretty secure as it ships. And Apple is pretty proactive in keeping it updated.

  • What is the best setting for previews in aperture for creating DVDs ?

    Hi,
    I would like to send clients DVDs of the photo shoots by dragging over the preview jpegs into iDVD. Not having a clue about the quality I should set for the previews [ in aperture preferences] could any one give some idea what preview size `I should be using for fairly decent quality. I should state I do not own a Television set and never will, so cannot test for myself. Seeing as widescreen is the most poular type of goggle box I intend to set IDVD to the widescreen dimensions.
    Also does the size and quality of previews affect the overall responsivness of Aperture?

    Congratulations on your avoidance of TV - I wish I could.
    The most expensive High definition sets around at the moment have a resolution that can display 1080 horizontal lines, so anything greater than this would seem to be a waste.
    Depending on who you believe the definition of "High Definition" as it refers to TV begins at 720 horizontal lines and extends up to 1080 lines. This is considerably less than what any half decent computer monitor can display.
    If you set your previews to the one with an asterisk you will be perfectly matched to display fullscreen on your computer monitor, and as I said above this should be better than most TVs. If you set a step or two lower thaen you probably won't have any problems on most TVs.

  • Need to know the best method for pattern matching

    Hi,
    I need a best a way to do the pattern matching with better performance
    for the following requirement.
    i need to search for a set of records as per the following requirements.
    1. The input string will be split into tokens with space as delimiter
    so if the user enters the text 'severe head ache',the tokens formed will be
    severe
    head
    ache
    2. The terms which contain exact match of the tokens formed should be fetched from the database
    (i.e)
    i. the token should appear in the term as such and no alpha-numeric character should be appended to it but a single space or any single non alpha-numeric characer is allowed
    ii. the token may occur anywhere in the string.(like start, end, middle etc.)
    iii. the term should contain all the tokens
    For ex. the following terms will be fetched for the above input
    1. patient has severe head ache
    2. severe, head ache are present
    3. leg pain "severe" #head pain
    4. pain, severe in head, leg
    But following terms should not be fetched
    1. severe leg pain - (it does not have the token 'head')
    2. headache severe and leg pain - (head is a part of the word headache)
    3. head67 severe pain - (head is a part of the word head67)
    Thanks

    How about Oracle Text? There's even a Text dedicated on this topic here.
    C.

  • Help!  Does anyone know the best framework for delivering an enterprise-quality Flex-based reporting system?

    Background
    We need to build a commercial-quality, Flex-based reporting system for the corporate customers who use our English learning system.  Ours is a multi-tenant web-based Saas solution.
    he solution must include:
    >  a slick, professional design, including Flex/Flash UI and charting and graphing
    >  a full suite of serverside functionality such as report management, scheduling, export and delivery
    >  strong security in a multi-tenant environment
    >  can be integrated seamlessly with our existing Flex/.NET application
    >  data sources are MS SQL Server database and/or OLAP cubes
    >  scalability/performance to serve tens of thousands of users
    >  no per-user license fees (we need to own this system)
    The initial focus is on "canned" reports with some parameter controls, while future releases will include more freeform report designer/builder capabilities.
    Do you know of a good example/approach?  Please reply here, or to [email protected]
    Thanks in advance!

    Hello,
    The recommended way is with JCA Connector.
    Adaptive RFC is included from NW7.1,
    See "Creating an Adaptive RFC2 Sample Application without using Web Dynpro"
    in the SAP HELP of NWCE7.1 or NWCE7.2.
    Seems to be based in JCo 3.0 and Java5 so it will not work in NW70.
    For older Versions like EP 5 there is also a JCo ClientService available.
    Regards
    Johannes

  • Let me know the best Ebook for Strutts,Hibernate,Spring

    Hello Dude,
    Please give some good book details for Struts , hibernate, Spring .
    Thank a lot in advance,

    corlettk wrote:
    georgemc wrote:
    I don't know of any e-books on those subjects. Maybe you'll just have to invest actual money in your career, like the rest of us
    The Hibernate bible is available as a PDF, and (IIRC) it's about half the price of the treeware version, and is delivered to your (broad-band) door in under 30 seconds. Beat that [Mr Carrier Pigeon|http://hungrybeast.abc.net.au/stories/great-pigeon-race]!
    Usually when someone asks for "e-books on struts" or anything, they implicitly mean "free". I could be wrong about the OP of course, in which case I apologise. But let's just see, shall we....

  • Anyone know the best resoluton for images in DPS folios?

    Do I recall hearing somewhere that they are automatically sized appropriately so as to avoid contributing to unnecessarily large folios?
    Thanks in advance.

    Hello,
    I believe PDF-compressed folios will resample placed bitmap images to 108 dpi -- sort of a compromise resolution between standard def and high def.
    Pass-through overlays will not resample images, however, so those would need to be compressed to whatever degree you feel is appropriate.
    Best,
    Jim

  • What is the best practice for setting up warehouse inventory for oil & gas tank farm

    Hi, i want to know the best practice for setting up warehouse inventory for oil & gas tank farm. SAP has these levels for inventory management in warehouse environment: warehouse-aisle-shelf-bin. To me the bin seems to be the central location for inventory. So do i set up each oil tank as a bin location?

    Hi,
    Please refer below link:
    https://help.sap.com/saphelp_sbo900/helpdata/EN/ad/4f233a7b864c7cbe2b57ad09246adb/content.htm
    SAP Business One 9.0 Training - Feb 6, 2013 - Warehouse Bins - YouTube
    Thanks & Regards,
    Nagarajan

Maybe you are looking for

  • JAXB Unmarshaller and errors to system.out

    Hi! I'm using JAXB in a complex XML binding project. The question is: is there a way to prevent javax.xml.bind.Unmarshaller to send to system.out the warnings/errors messages as DefaultValidationEventHandler: [ERROR]: bla bla bla which are sent immed

  • Need to post a reply to a thread but I'm forced to ask a question?

    It is embarrassing that I have to work around a registration bug by asking a question when all I need to do is establish and account to reply.

  • Problems with the latest firmware upgrade

    I found a problem with the 01-10-2006 firmware upgrade. Now that it is inside my ipod certain videos don't play properly anymore. Actually the video starts, it plays normally for a while and then it goes still for a few seconds and then, when it play

  • Necessity EP in NW BI 7.0?

    Hi all, We are facing an upgrade from BW 3.5 > NW BI 7.0. I'm a little bit confused about the (functional) necessity of EP. In most documentation I understood EP is at least a necessity as technical platform but also for publishing WebTemplates as th

  • . Try saving to disk first and then opening the file. when I download

    C:\Users\howie\AppData\Local\Temp\incredimail_install-12.exe could not be opened, because an unknown error occurred. Try saving to disk first and then opening the file.