I know there's a simple answer
Hi ...
New to this software, Life Cycle 7.1. I was able to design the form rather easily. Previewed the form. Sent it as an email attachment (the file came through as a .pdf) to someone who was able to fill in the form very easily.
When they clicked the "submit" button, the file attached to the email as a .xml format. The file comes through as an .xml format. When I receive the email and try to open the file, it goes to a web page with each field listed.
I want it to open in the pdf format in which it was created. How is this accomplished? If this is not possible, how can I use the web page information?
Thanks
Sandee L. Hill
Change the "email submit" Button to a regular button.
Under the submit tab, change "submit as" to PDF. change the button text to "Submit" DONE!
Similar Messages
-
My garageband can't be used because when I open a project (new or old) the program extends beyond the bottom of the display screen and I can't access what is below the bottom of the screen (like the record button). I know there's a simple fix, but what?
two things to try: either click the green "zoom" bottom at the topLeft of the window in the title bar, or go to your System Prefs and then Displays, and increase the resolution that is used
-
I can't view my photos on my TV using AppleTV. This is because when I get to the iCloud Photo Settings page and turn on My Photo Stream,there seems nowhere else to go to look at my photos. I guess there is a simple answer! Can anyone help.....please
artschic:
Welcome to Apple Discussions.
Congratulations on your new MacBook Pro. You'll love it.
In terms of your PowerBook G4, apparently your Hard Disk Drive has failed completely and I am not sure what else it wrong.
First, try this:
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately hold down Shift key to start up in Safe Mode.
• Log in and empty Trash.
• Restart normally and log in.
If that does not work try Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
If still no dice, try the procedure outlined in the article Resolve startup issues and perform disk maintenance with Disk Utility and fsck.
cornelius -
I know there must be an answer, but I cannot find one....
Recently my daughter "misplaced" her iPod touch. I know the serial # and it was registered with Apple. There should be a way for the iTunes store to recognize if it is connected and report it found. I know about www.ihoundsoftware.com, but I did not have the app on the device, so it is useless now. It really irks me that we cannot find it and after days of searching I suspect it might have "walked." It seems extremely technically "easy" to validate a serial # when logged in and find it surprising that Apple's programmers aren't capable of such a convenient feature. Unfortuantely I cannot afford another one. Does anyone have any ideas of what I may be able to do, or services besides www.ihoundsoftware.com that can be used after the fact?
Thanks in advance for any helpWell, what if I buy an iPod on Ebay.
Seems legit, I have no reason to think it's stolen (or "found")
Now, I plug it in, it "talks" to Apple, and they accuse me of using a stolen iPod.
I'd be pretty p*ssed off if that were the case, and believe me, legalities do come into play there.
I'm sure in time that a method of doing this will be accomplished, in the meantime, have her watch Polar Express and cross her little fingers -
I'm sure there's a simple answer...Copy/Paste InD to PS pixel shift...
Howdy, I'm copying from indesign and pasting intophotoshop, and the 'pixels' keep shifting--I'm using points as the measurement in inDesign and would think they would translate to the PS pixels but not so much. Is there a setting to turn of anti-alaising or something on paaste? Are the units of measurment just a hair of enough different that it causes issues?
Thanks in advance,
-TedThanks Bob, was doing that, seems that it's juts an error ID-ten-T, if you know what I mean (user )
just sorted it out...
Seems my default in PS for placing the object from the clipboard is set to W: 101.7% H: 110.0% instead of 100%/100%.
Putting it back to 100% fixed it.
*sigh* there goes an hour
Thanks anyhow. -
I am sure there's a simple answer to this newbie question
Hi group,
I am trying to burn my movie for my DVD Player.
I am using PAL format.
I edit the movie in Pinnacle Studio.
I imported it into Encore.
I try to burn a project 1.8 Gigas in Size and no problem
I try to burn a project 2.0 or greater and it won't work!!!
I am using DVD R/W
I am sure there's no problem with the DVD Burner because I am able to
burn a DVD movie using Nero onto a DVD R disc and no problem.
My Burning speed is 1X.
I have a machine built for editing: 2 giga of memory/ A8N-SLI premium
Mother board / AMD 4200+ processor / 700 gigas of hard disk, etc
How do I solve this problem?
Thanks in advance for any help.I am using MPG 2 as a source for my movie.
It won't work means that I appear to burn it successfully but when I go to the DVD player, it movie skip, drags after about half way through.
If I burn the smaller sized file It will play well throughout but I need
a 3.5+ capacity.
Thank you. -
I am sure there is a simple answer... but why can't I find where my extension is after install?
Hello,
I downloaded KT-ly 's 151 shapes and borders, tried to instal them, but when I open my PS I can't find anywhere. I can find my other downloads under brushes and actions, but not this one... where should i be looking??
Also, on another border download, which installed the borders under the brushes (??) I can only change the color of the inside of the image, but the outline stays in black??
I am new to this!!
THanks!slfranchuk11 wrote:
I am new to PS, and have spent the day learning.
I am not new to Photoshop, have spent the last six years learning, use the application for at least about fifty hours per week, and I feel that I've barely scratched the surface.
slfranchuk11 wrote:
I can't find any 'shapes', how would I get to that menu?
Not a "menu".
Go to the Tools panel, select custom shape,
then: -
I ca not install Itunes 10.5 on vista or windows 7 my iPhone 4 is much slower and freezes and also certain apps and also certain features will not work on the phone now that I cannot update it to ios5. When I go to the store they turn me away with my laptops and tell me to buy there computer that's the only answer. I know there has to be away around it? I am also up for a new upgrade on my second phone line and was going to get a 4s but now I am thinking it may be the wrong choice I am very unhappy with Apple right now...
WOW! That font is difficult to read. But, see if this support document helps you http://support.apple.com/kb/TS3989. Photos stream is based on date and photos more than 30 days old are removed. Photostream is designed as a temporary storage to allow you to download the photos to the computer.
-
Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
If I use DE is there a way to know when your question is answered or where to find it?
I new and I just need to know if I can get answers to my questions.
Hello
When you sign into the DE ( using a valid email and your password) and ask a question, you will get an email notification indicating activity on a post you have made whenever someone responds. The email will have a link to the post and the title of the post. So it would be best to use a valid email.
It should be just like the email you will get when I post this response to your question. Unless you used an invalid email, in which case, I guess you wont know.
I hope this answers the question.
Bilal Durrani
NI
Bilal Durrani
NI -
Looking for a simple answer ........ without the ...
looking for a simple answer ........why is it more difficult for skype to connect than before . It fails to ring most times and your never sure if it is just slow or did not dial in the first place??? and is there any way to disable the leave a message feature ??? I am afraid soon it will be like most wondows applications where you will need endless updates and patches just to keep it running ..... Why is it that everyone is trying to fix everthing when it isnt broken.
WTF? I'm sure you can find plenty of examples on google. It's on you to take the time to go through them, study them, and, if you still don't understand something, post a clear, concrete question that indicates what you read and what you didn't understand about it.
As is, you're essentially treating folks here as your research flunkies and saying, "Give me an example that's better than all the ones already easily available to me. Read my mind to know why I didn't like them." -
Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
You don't like it.
You've heard it recently and don't want to hear it now.
Simply don't want to hear it at this time.
For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
I'm not trying to be prescriptive, just giving you food for thought.
(They are all cheaper options than buying a car which can control the iPod from the steering wheel.) -
Need a simple answer for simple question???
simple question... what is the best way to export my fce movie and burn it on idvd for the best quality for genaral use ... sd..4x3 ratio tv.. lots of ken burn effects on photos... lots of sd video... ???
not so simple answer... i have read manuals.. apple discussions.. etc etc my eyes are blurry.. i have been exporting out of fce to qk time movie, then import to idvd and burn..
i get lots of wavy or jitter when doing kens burn effects on photos.. i have been told that 1 field must be missing.. and its better to take the qk time movie convert it again making sure hi quality is checked(movie properties 720 x 480) and self contained movie, then import to imovie ver 5.02 which has better codecs then to idvd ... an apple store tech said..
then another apple store tech said...dv pro or dv stream or interlaced or on and on and on
its not 16x9, or for the web or anything but simply burn it and give it to my grandma to play in a standard dvd player.. best quality.. period.. i know it won't any better than my source video but the wavy photos bother me..
helpThe Apple store tech told you garbage. The quality will be the same. It's using the same QuickTime engine. There may be a difference because going through iMovie will go through a file conversion and the picture might be softened a little, which will mitigated this flicker you see.
The wavy photos can be a lot of things, most likely due to the nature of the images themselves and the movements you've done on them. What often works on still images is to apply a one pixel vertical motion blur in an application like Photoshop or Elements. This helps to reduce interlace flicker on motion when the material is brought into a video editing application. -
Whether there is a simple way to add new Mapping operators on a mapping?
Whether there is a simple way to add new Mapping operators on existing mapping?
For example I have a mapping, but now I need to add new Filter or Aggregator operator, so I must delete all connections between attributes, then add new operator, connect source attributes to the input attribute for the operator and so on.
Is there way to turn down this operations, simply drop new operator on source object or on a connection between two objects, and necessary operations will be automatically executed.
As I remember in OWB2 something similar existed in a way to add new Filter operator.Dmitry,
Unfortunately there is not. What you should aim for, is to use the group-by-group mapping using match by name (with some additional options, such as ignore source/target prefix, suffix, etc.).
I.e. if you want to insert another operator, then I recommend you first populate attributes based on an operator that is currently on the mapping delete the old operator (to delete all connections), map into the new operator and add another operator in order to re-create what you previously had. I know it is not ideal... but in my experience it is the most productive way to work.
Thanks,
Mark. -
Is there an easier/simpler way of obtaining this result ?
Good morning (afternoon to you, BluShadow),
I obtained the following correct, as desired, output (derived from the EMP table):
D10 D20 D30 PREZ MGRS ANALS SALESM CLERKS
CLARK JONES WARD KING BLAKE FORD ALLEN ADAMS
KING FORD TURNER CLARK SCOTT MARTIN JAMES
MILLER ADAMS ALLEN JONES TURNER MILLER
SMITH JAMES WARD SMITH
SCOTT BLAKE
MARTINusing the following query:
with
-- pivoted departments (haven't studied the Oracle PIVOT clause yet)
depts as
select max(case deptno
when 10 then ename
end) as d10,
max(case deptno
when 20 then ename
end) as d20,
max(case deptno
when 30 then ename
end) as d30,
rnd
from (
select deptno,
ename,
row_number() over (partition by deptno
order by deptno) rnd
from emp
group by rnd
order by rnd
-- pivoted jobs
jobs as
select max(case job
when 'CLERK' then ename
end) as Clerks,
max(case job
when 'PRESIDENT' then ename
end) as Prez,
max(case job
when 'MANAGER' then ename
end) as Mgrs,
max(case job
when 'ANALYST' then ename
end) as Anals,
max(case job
when 'SALESMAN' then ename
end) as SalesM,
rnj
from (
select job,
ename,
row_number() over (partition by job
order by ename) as rnj
from emp
group by rnj
order by rnj
select d10,
d20,
d30,
Prez,
Mgrs,
Anals,
SalesM,
Clerks
from depts a full outer join jobs b
on a.rnd = b.rnj
order by rnj, rnd;which takes a total of 5 selects to get there.
I was trying to find a query that would be, hopefully simpler, easier and didn't require as many selects. My last attempt is the following (which is close to the desired result but doesn't get a cigar yet):
select case deptno
when 10 then ename
end as d10,
case deptno
when 20 then ename
end as d20,
case deptno
when 30 then ename
end as d30,
case job
when 'CLERK' then ename
end as Clerks,
case job
when 'PRESIDENT' then ename
end as Prez,
case job
when 'MANAGER' then ename
end as Mgrs,
case job
when 'ANALYST' then ename
end as Anals,
case job
when 'SALESMAN' then ename
end as SalesM,
row_number() over (partition by deptno
order by deptno) as rnd,
row_number() over (partition by job
order by ename) as rnj
from emp
order by rnj;The above query gets me to this result which is encouraging but... short of the mark:
D10 D20 D30 CLERKS PREZ MGRS ANALS SALESM RND RNJ
ALLEN ALLEN 3 1
ADAMS ADAMS 2 1
BLAKE BLAKE 6 1
KING KING 2 1
FORD FORD 1 1
SCOTT SCOTT 5 2
JAMES JAMES 5 2
CLARK CLARK 3 2
MARTIN MARTIN 2 2
TURNER TURNER 1 3
MILLER MILLER 1 3
D10 D20 D30 CLERKS PREZ MGRS ANALS SALESM RND RNJ
JONES JONES 3 3
WARD WARD 4 4
SMITH SMITH 4 4It uses only one SELECT statement and has all the data that needs to be displayed but, I cannot find a way of eliminating the nulls without losing either some jobs or some depts.
Your help is welcome and appreciated,
John.
PS: I'll be perfectly happy learning that there is no easier/simpler way. In other words, if the answer is simply "No, there is no simpler/easier way", please do let me know that is the case. (I ask that you be fairly sure of that though, thank you)
Edited by: 440bx - 11gR2 on Jul 25, 2010 7:19 AM - Added PS.Hi, John,
You had part of the solution in each of your attempts.
Do a FULL OUTER JOIN, as in your first query, on two copies of the result set of your second query.
Using Oracle 9 features only:
WITH got_row_numbers AS
select case WHEN deptno = 10 then ename end as d10,
case WHEN deptno = 20 then ename end as d20,
case WHEN deptno = 30 then ename end as d30,
case WHEN job = 'CLERK' then ename end as Clerks,
case WHEN job = 'PRESIDENT' then ename end as Prez,
case WHEN job = 'MANAGER' then ename end as Mgrs,
case WHEN job = 'ANALYST' then ename end as Anals,
case WHEN job = 'SALESMAN' then ename end as SalesM,
row_number () over ( partition by deptno
order by NULL
) as rnd,
row_number () over ( partition by job
order by ename
) as rnj
from emp
SELECT MIN (d.d10) AS d10
, MIN (d.d20) AS d20
, MIN (d.d30) AS d30
, MIN (j.clerks) AS clerks
, MIN (j.prez) AS prez
, MIN (j.mgrs) AS mgrs
, MIN (j.anals) AS anals
-- , MIN (j.salesm) AS salesm
FROM got_row_numbers d
FULL OUTER JOIN got_row_numbers j ON d.rnd = j.rnj
GROUP BY NVL (d.rnd, j.rnj)
ORDER BY NVL (d.rnd, j.rnj)
;I've been trying to think of a good name for this kind of query where the items one the n-th row have nothing in common except that they are on the n-th row. For lack of anything better, I call it a Prix Fixe Query , because it resembles the menus where, for a fixed price, yuu can choose different options for each course:
Appetizer Soup Main Course Desert
Pakora Coconut Aloo Gobi Galabjamun
Salad Lentil Bharta Halwa
Samosa Dhosa Kulfi
Saag PaneerAbove, each column is sorted alphabeticlly. There is nothing but pure coincidence linking 'Pakora' with 'Coconut' or "Aloo Ghobi' with 'Galabjamun': they just happen the be the first items, in alphabetic order, in their respective columns.
You may notice that I used
"PARTITION BY deptno ORDER BY NULL " where you used
"PARTITION BY deptno ORDER BY deptno "
It never makes sense to ORDER BY anything in the PARTITION BY list. Each distinct item in the PARTITION BY list is a world of its own. You will only sort things that are identical with respect to the PARTITION BY list. That is, if the system has to decide whether to give 'CLARK' or 'KING' the lower ROW_NUMBER in deptno=10, deptno itself will not help the decision: the deptno for both will necessarily be the same. There's no syntax error, it just doesn't do any good, and the order of the output will be arbitrary.
There would be a syntax error if you omitted the ORDER BY clause: ROW_NUMBER must be done in the context of some ordering. If you really want the order to be arbitrary, then be clear about it. ORDER BY a constant (such as NULL) so that nobody reading the query quickly is fooled into thinking you really are ordering by something. (A comment would be helpful in that case, also.)
You probably want to "ORDER BY ename", or something meaningful, in this case.
Edited by: Frank Kulash on Jul 25, 2010 2:41 PM
Added digression of "PARTITION BY x ORDER BY x"
Maybe you are looking for
-
New ipad3,just getting started,trying to get on FaceTime but when I try to set up a message appears saying my email address is already in use. I can not get any further, help please
-
Customized Reports through Stored Procedure
Dear All, Will the SAP Policy allows in creating the Stored Procedure to design a crystal report within the SAP Company Database. Thanks, Uma
-
Safe to update using different computer?
I'm currently on vacation and the place I'm staying at uses Windows computers, no macs. My phone is usually updated on my MBP. Is it safe to update the OS using a windows computer that is not mine? I've already made sure that my phone will not sync a
-
My Nokia 5233 Is Stopped Working When I Was Updati...
I connect my phone to computer and check for updates in Nokia Software Update. After some update It get hang . and i push the wire from mobile . the mobile gets switched off . and now its not turning on.
-
Is it possible to install Keynote on a Windows laptop?
As you are all well aware Keynote rocks. My company however only buys Dell equipment and I would very much like to have the functionality of Keynote (and Pages for that matter) on my Dell laptop. Is there a Windows version available?