I know this has been discussed but the login error...

i know i know! many people have posted about this. i have been working with this error for quite a time now and i was happily waiting for apple to solve this. there is still no change and it is getting VERY annoying that apple is not doing something about it!
is there any plan that this error will be removed or will it stay forever?
max

The continuing issue of this login error has been an on-going discussion in "The Lounge". The Hosts are very much aware of it, so all of us need to be patient.

Similar Messages

  • System Fonts. I know this has been discussed, but...

    I need to use Tahoma in muse and I do NOT want it to rasterize for the sake of cleanliness and good SEO. I don't understand why I can't just specify a backup font for people who may not have Tahoma. When I designed in dreamweaver I would just set Tahoma as the primary then Arial or serif as the backup and that worked fine. My company has chosen Tahoma for ALL of our documents, internal and external. Please tell me there's a workaround for this that doesn't involve getting hurt mentally or physically.
    Thanks

    Hi,
    There is no workaround short of manually editing the CSS after Muse exports it. Since you've used Dreamweaver in the past, this may be doable for you (one tip: using paragraph styles will make your job easier). Of course, you'll have to do this every time you change something and re-export.
    Background:
    The set of web-safe fonts exposed in Muse were carefully chosen based on how universally available they are. Secondly, the set of fonts in a Muse web-safe font stack such as 'Arial, Helvetica Neue, Helvetica, sans-serif' are similar enough that swapping one for the other will not cause much noticeable layout changes. Making it all too easy to create arbitray font stacks is fraught with risk: both in terms of universality and the potential for layout changes.
    Abhishek

  • I know this has been answered but... X11 and Gimp

    I have read all the advice about reinstalling X11 from the Snow Leopard disk and then doing an Update from Apple.
    Recently my hard drive was replaced at the Apple Store and I have had to reinstall all my software but Open Source software like GIMP and INKSCAPE didn't work. SO I religiously read all the docs about this problem and religiously did the stuff above.
    Yes I have X11 reinstalled and updated but Gimp and Inkscape STILL do not work - they load but no fonts or anything else does and they just sit there doing nothing no access.
    Any ideas - I have taken them off and reinstalled. This has only happened since the new hard drive - everything else is fine but this is very frustrating and I can't work on graphics with these progs now.
    Please could some kind person advise another strategy I'm pulling my hair out this end?

    I updated this morning and x11 no longer starts. I am now running 10.6.8.  The dump from x11 starting
    and crashing is below.  Looks like a library version problem.
    Process:         X11.bin [674]
    Path:            /Applications/Utilities/X11.app/Contents/MacOS/X11
    Identifier:      org.x.X11
    Version:         ??? (???)
    Build Info:      X11server-850300~2
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [192]
    Date/Time:       2011-10-19 08:30:16.502 -0700
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          566289 sec
    Crashes Since Last Report:           6
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      0108C5BC-F883-4756-BD87-EEB33B514D4A
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /usr/X11/lib/libfreetype.6.dylib
      Referenced from: /usr/X11/lib/libXfont.1.dylib
      Reason: Incompatible library version: libXfont.1.dylib requires version 13.0.0 or later, but libfreetype.6.dylib provides version 10.0.0
    Binary Images:
        0x7fff5fc00000 -     0x7fff5fc3bdef  dyld 132.1 (???) <B536F2F1-9DF1-3B6C-1C2C-9075EA219A06> /usr/lib/dyld
    Model: MacBookPro6,1, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.57f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB Storage, 0x05e3  (Genesys Logic, Inc.), 0x0715, 0xfa130000 / 6
    USB Device: FreeAgent GoFlex, 0x0bc2  (Seagate LLC), 0x5021, 0xfa140000 / 5
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0xfa120000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8218, 0xfa113000 / 7
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Hub, 0x05ac  (Apple Inc.), 0x9126, 0xfd130000 / 5
    USB Device: i860, 0x04a9  (Canon Inc.), 0x107f, 0xfd132000 / 10
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0xfd133000 / 9
    USB Device: Combo Free KVM, 0x10d5  (Uni Class Technology Co., Ltd.), 0x5000, 0xfd133100 / 12
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfd133200 / 11
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfd133220 / 13
    USB Device: Display Audio, 0x05ac  (Apple Inc.), 0x1105, 0xfd134000 / 8
    USB Device: Apple LED Cinema Display, 0x05ac  (Apple Inc.), 0x9226, 0xfd136000 / 7
    USB Device: Display iSight, 0x05ac  (Apple Inc.), 0x8508, 0xfd135000 / 6
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0xfd110000 / 3

  • I know this has been said BUT K8N plat won't post

    I am at my wits end with this damn thing.  I have installed a ton of PCs and never as much trouble as I have with this AMD64 3000.  First I ordered it with the Chaintech 150 board after reading great reviews on it.  That was my mistake for not looking at the forums to see what the real users say.  
    OK after RMAing the board back and forth and getting jack I gave up on it, set it aside and got the MSI K8N.  Installed it with the things below only and actually got the power to stay on only to lock on keyboard and not post.  
    I then read everything I could find in forums and tried everything that was suggested on top of what is the usual steps and got squat.  I am wondering now if the board is bad and I need to RMA it.  Has anyone found a fix to this post problem as I see a lot of people have had it.  I can tell you that my board is not shorted out, I tried other ram and am convinced that is not the problem.  Went and bought a new USB keyboard I did not need and still crapo.  God what I would not do to see a bios screen or even a post!
    Any other suggestions?  If I RMA this and get the same damn problem I swear I am going to start looking for my chainsaw!  
    2 months and counting while Doom3 sits unopen!  

    OK I tried moving the SATA connect to all the other 3 plus I moved the mem.  I think now I have tried about every combo with the mem and have had no luck.
    One thing that I didn't mention as I thought it was part of how this mobo sets up, but as soon as I plug in the power cable and turn on the PS the PC powers up.  I then can control it via the power switch., but if I unplug it then it will repower as soon as the plug is reinserted.
    I let iit sit in this error state for quite some time also and it doesnt appear to be a heat issue.  There has to be something simple that I either did wrong or am missing.  I have read a lot of post of people with this exact same problem and now I am getting emails of more having the problem and asking me to let them know what worked.  It would have to have been a really bad Monday at MSI for this many boards to be faulty(and that is humor as I think it has to be something I am missing).
    Oh and the Chaintech board would powerup for a split second then shut off.  It never made it near a post .   Read someplace that Corsair mem would not work with the Chaintech (plus many others) and decided to switch to the mobo choice most forum people were suggesting for a AMD64.
    I appreciate all the suggestions.

  • I know this has been discussed

    I did a search but I guess im not typing something in right.
    I was wondering if there is anyway to put everything that is on my ipod on to itunes.
    My itunes has been completely erased and I have all the tunes on my ipod but I am not sure if they can go back to itunes.
    I have itunes 7.1.1

    Copying from iPod to Computer threads...
    http://discussions.apple.com/thread.jspa?threadID=868833&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=893334&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=797432&#797432
    Also these useful internet articles...
    http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
    http://playlistmag.com/help/2005/01/2waystreet/
    iPod: Frequently Asked Questions
    http://docs.info.apple.com/article.html?artnum=60920
    Patrick

  • I know this has been discussed alot but...phone does not see wifi

    Yet, the free app, ewifi sees 8 networks...ive dont all the troubleshooting suggested by apple with no effect.
    So to sumarize, if i go to my wifi settings, it sees no networks. If i load ewifi it sees many and i can connect to them at will.
    Have tried all the resets suggested by apple, and i do have a mac address for the wifi in the "about" screen

    You might try switching to another channel on your router and switching from g/b to b only. It worked recently for one guy here:
    http://discussions.apple.com/thread.jspa?threadID=2345332&tstart=0

  • Yes I know this has been covered but not answered

    Hi I have an IMac that is only a few weeks old with fully updated software on all levels.
    Ok so I get that I had to go buy an external CD drive so that I can be old fashioned and still burn music from my CD's into ITunes.  I get that I will have to replace my 5.1 surround sound speakers because Jacks and Plugs change over time.
    What I cannot fathom is why this silly ISight camera just doesnt work on a chat site I have been a member of for years.  Yes its a flash based chat room and no when you right click the ISight camera is not in the list there is only one in the list and it aint the built in one. 
    Can anyone tell me where I can go to find out how to control this camera - there is no camera or video control under the system preferences - I have ensured that Photobooth and other programs that may use the camera are off or logged out - I have googled extensively - I have even emailed the chat host...
    Where can I get access to some camera controls or software that will enable the cam to talk with a broader range of sites??
    Max

    Ok so use  > System Preferences ... > Flash > Advanced to verify you have the latest Flash software update that is compatible with your system.
    Ok so then also check   > System Preferences ... > Flash > Camera and Mic to verify that your Flash settings are not blocking the camera for the site(s) you want.
    Ok so if your trouble continues after the above, see  How to Troubleshoot iSight.
    Ok so at this point, if your ONLY trouble in every user account you tested is with Flash-based camera sites, you need Adobe Flash Player Help.
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

  • Photo Booth Disappeared... I know this has been discussed before...

    My Photo Booth Icon is gone, its not in applications or the trash, nor does it come up in spotlight.
    I checked my backup, and the file must have been gone for some time, because it is not in the backup either...
    Now the really fun part, I do not have my install DVD... so I cannot get it there or with pacifist.
    I found a link to download it, and the zip file opens and the photo booth icon appears, but it crashes when opening... so probably an old or corrupt download.
    Are there any other suggestions you guys can give me? Or another place to re-download a current copy? OR... If I take it to the Genius Bar, can they reload from an install DVD they might have?
    Thanks much.

    the main suggestion is to get an install dvd. what happened to yours? you need to have one.

  • I know this has been covered but, another sound issue (K8N Diamond Plus)

    Ok, I just spent another $111 on a new PSU w/dual 12V blah blah with a 19A rating and I'm still experiencing some pretty weak ass sound. Instead of an eight pin power connecter it gave me a four. Do I need to place the four pins in a diff. placement? i.e. 2,3,6,7 instead of 1,2,5,6? I checked the jumpers and DL all the drivers. Could it be the fact that my processor is 64bit dual core? Do I need diff. power supply or powered speakers? I'm at the end of my rope here. Any thoughts?

    PSU: Antec True Power 2.0 550watt or http://www.newegg.com/Product/Product.asp?Item=N82E16817103931
    AMD Athlon 64 x2 dual core
    WD Hard Drives SATA 80G X 2
    old cd and cdr drives not to be mentioned
    Corsair 1G
    nVidia GeForce 7800GT
    thats it so far

  • Video on Mac to Storm...I know this has been covered!

    Sorry, I know this has been covered, but it has a ton of things I can not use....or understand.
    I am on a mac. I have some movie previews that are in a .mov format.  I had uderstood I need to convert them into .mp4 format....I did this in Quicktime....and exprteded them a few different ways....but every time I go to play them they break up and get all pixialated!
    I have a 16g card, and I am putting them in the Videos folder on the chip through usb reader.....what am I doing wrong?!
    Thanks

    It was magical. I did something to my router, I'm not sure what, and iChat now connects to Windows machines with audio/video. I think the problem is very specific to what type of router you have.

  • How can i increase the height of the navigation toolbar to make my persona more visible? adding toolbars puts them all below the navi bar and it looks weird. i know this has been asked many times but the answer's always "add toolbars".

    How can i increase the height of the navigation toolbar to make my persona more visible?
    adding toolbars puts them all below the navi bar and it looks weird.
    i know this has been asked many times but the answer's always "add toolbars".

    Look here.
    http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search

  • So, I know this has been asked before. But, has anyone heard from Apple?

    So, I know this has been asked before, but I'm just looking to see if anyone had heard from Apple on this at all. The minimum volume on my iPod Classic 160gb is too high, and I can't lower it. (AKA when I kill the volume, I can still hear music).
    I called them today, but the rep was pretty useless. He even dropped the "well, just press pause" line on me. Took him a while to understand that when I'm in bed or studying, etc. the minimum volume is too loud, and I wanted to be able to set it lower.
    The best workaround I've found so far is to buy headphones with their own volume control, but I just can't help but feel that someone shouldn't have to by additonal gear after buying this thing on account of such a basic feature exclusion.
    Anyways, thanks for any help !

    Wow, easy there company boy!
    I've heard all of what you spit up before.  And for your point of "Well, in several cases, people have complained (here in these discussion pages), that they expect the volume to be zero when turned to minimum position" that kind of ties in to why Apple should fix this.
    And yeah....it's pretty much a given that "you and I have different interpretations of what constitues too loud" This is where the option to adjust the minimum volume comes in to play.  (I relly feel bad for you. Honestly. Having to live everyday of your life this way must be just brutal)
    The wording would be pretty simple too. " Be aware there are many instances of the minimum volume being too loud, so think twice before dropping a few hundred bucks on this"
    And, you're right. It is horrible to 'whine' about being ripped off and asking if there is a possible fix for the issue. I really do apologize for that. I should just suck it up and not voice my opinion that this is not fair to consumers, and Apple shouldn't fix a known issue with a product.
    I did reset & restore, I figured that was pretty much implied since I said I spoke to Support.
    And I am not at all surprised that you would say "I - for one - am not surprised that Apple might say, "simply hit the pause button"."  Again, I don't want it on muteReading your post made my eye twitch at least three times.
    This is exactly the reason I was resitant to post on a forum. But, I got a good laugh anyways. Thanks guy!

  • I know this has been asked before But I Deleted 6 mths worth of Bookmark folders, Cant use Undo,

    I know this has been asked before But I Deleted 10 mths worth of Bookmark folders, Cant use Undo & havent backed up (live & learn) Someone posted do a restore from "Import & Backup" My listing in Restore is only 2010-6-29 back to 2010-6-22. Is this the way to go to retrieve as much as possible or is there another solution?

    Those dates are when a backup was automatically made by Firefox, not dates when you saved specific bookmarks. Try restoring the backup from the day before you deleted all those bookmarks. It will restore the entire backup file - not just what you deleted, you will lose any bookmarks that you saved after the date of the file you restore.
    [https://support.mozilla.com/en-US/kb/Lost+Bookmarks]

  • My network symbol keeps working on my home page even when I'm not doing anything, I know there has been problems in the past with this so has it come back, help it's killing my battery!

    My network symbol keeps working on my home page even when I'm not doing anything, I know there has been problems in the past with this so has it come back, help it's killing my battery!

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • During CS5 master collection update, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

    During CS5 master collection update on Windows 7, 64-bit laptop, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

    Since CS5 is from 4+ years before the Cloud, this is not the right forum... but I don't really know a correct forum for that very old product
    Have you tried to manually update the individual programs?
    All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Maybe you are looking for