I know this is not a Toad forum....

..but I have a problem with accessing another database via Dblink, 11.2 to 9.2.
I have written routines to test iteratively against dual, 100000s of times and this consistently succeeds.
I have written routines to test iteratively against dual, 10s of times against the largest table I could find (multi-million rows)
This too never fails, both of the above on select count(1)
But, when I am pulling a large volume of data over the dblink, purely to insert into another table, sometimes (not consistently) it fails, and then it will not work on that Toad session again, even though using sql*plus to connect via the same client still works.
Okay questions; given that Toad works for everything else, but I get this error on two different client machines, albeit intermittently, can anyone suggest what might help. (could this be virtual memory related?)
Two, I presume if I use dbms_job to time the same query in then as I have bypassed my client then provided comms between my servers is good then this should not fail 'off client'?
Three, is there any kind of time out setting that could help?
thanks for any input,
Robert

But, when I am pulling a large volume of data over the dblink, purely to insert into another table, sometimes (not consistently) it fails, and then it will not work on that Toad session again, even though using sql*plus to connect via the same client still works.It fails with which error? From your description I would guess at some kind of network/connection lost issue (Ora-3113). In such cases you can't reuse the same session again since the connection to that session is lost.
I don't use toad much but I have the same experience with sessions in SQL developer. If the connection was lost I need to close this connection (the tool sometimes doesn't nitice the lost conenction properly). And reopen a new connection+session again. Then it works usually. In very rare cases I have to close the whole SQL Developer and restart it (or open a second developer instance). Maybe it is the same with toad.
Also there are timeout settings on various parts of the system. At the moment I can think of the following locations:
* Your local SQLNET.ORA
* the SQLNET.ORA on the local database with the DB-Link
* Database parameters like DISTRIBUTED_LOCK_TIMEOUT
select * from v$parameter where name like '%timeout%';Edited by: Sven W. on Nov 19, 2010 3:26 PM

Similar Messages

I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s

I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s and keep my same plan but switch to the Edge program. Is this possible? I don't think I should have to pay an early termination fee or anything like that since my phone has become almost unusable. I know under normal circumstances you have to wait 2 yrs to upgrade but due to the update and the poor service I'm now getting I hope Verizon can make an exception. Thank you.

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

I apologise in advance if this is not the right forum, but I need to do a reformat on this computer. My question is, after deactivation of CC, PS, LR and Bridge do I need to uninstall them as well?

I apologise in advance if this is not the right forum, but I need to do a reformat on this computer. My question is, after deactivation of CC, PS, LR and Bridge do I need to uninstall them as well?

If you are going to reformat the hard drive, wiping out all data on the computer, there is no need to uninstall. Deactivation is enough.

I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now. I know this is not normal. What can I do? It synced just fine, but has been stuck on" updating ipod software for 3 hours now!

I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now. I know this is not normal. What can I do? It synced just fine, but has been stuck on "updating ipod software" for 3 hours now!
She has had it for about 6 months and this is the first time we have plugged it into the computer since then. I can not exit out of itunes either.

If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required. You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

Ipad appstore shows all Apps up-to-date, but I know this is not the case. How to fix?

App store shows all apps are updated, but this is not the case. Yesterday I opened the appstore and saw 7 apps that needed to be updated, however after a refresh it shows that all apps are updated. Unfortunately I didn't update any apps and I found several apps by manual search that will update. In addition imovie can't be updated on ios 5.1.1 but this used to show in updates.
How can I get the appstore to correctly show apps that can be updated.

Quit the App Store app.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

Sorry I know this is not new...

but can somebody please help me with this? I just got the iphone4. Was very excited about it too...
I got home and I connected to my time capsule using password etc. Looked like it connected fine (got the wifi bars at the top, full) but when i tested it by trying to watch youtube clips, it was VERY slow to load, and then maybe played 10secs before it stopped and buffered or something - it outright paused and waiting for it to load further took an age.
Was a bit puzzled as I had never had problems with my 3GS. In fact, checked my 3GS side by side and lo and behold, my old phone was much faster at loading clips, and didn't pause half way through.
I tried reconnecting my time-capsule, rebooting my iphone, restoring factory settings, network connections and all the rest of it - no luck with wifi.
I turned the Wifi option off and found that it played the videos much better (but not perfect) just using 3g, while other apps that used video (for example Trailers which shows movie trailers) worked perfectly fine.
I also downloaded speedtest and looked at my upload/download speeds - again, doesn't appear to be a big issue (speeds are 7-12mb/s)
Can anyone help me fix this issue? is it a glitch with the Youtube software and IOS 4.0.1? Is my phone faulty? My 3GS works perfectly fine and it has IOS 4.0.1... I am regretting having 'upgraded' to the new iphone...
Hope somebody can help me
Many thanks

Ok - fwiw - I went to my local Apple store yesterday. Showed them Youtube clips side-by-side and they agreed my phone looked a little faulty.
They then gave me a new phone. Same problem. Another new phone. Same problem. On my third new phone, the senior Genius Bar guy came over to help out.
His take on it was that the new iphone displays Youtube clips at a higher resolution, so hence the longer load time versus the 3GS. I'll be honest - I have no idea whether this is the case but having seen 3new phones ALL underperform versus the 3GS, maybe this is the case.
In anycase, I hope they fix this problem, or at least add options to the Youtube app so that we can play clips that don't take hours to load.
If anyone finds the same problem, or you think Apple's explanation is wrong, can you please let me know thanks!!

Zen Nano Plus Volume (I know this is not n

The problem of the minimum volume of /25 being too loud for many still exists. I would like to ask if it is possible to reverse this glitch even if a new firmware if released? Or does the mp3 player, being a flash player mean that once it's done, it's irreversible?
I know many have suggested finding external volume control means. However, I'm having a horrid time searching for such ear phones. Most of which are cheap ,of low quality and with this specific feature needed, my choice of earphones are greatly restricted. I notice that the creative ,other better brand earphones and those expensi've ones do not include this external volume control system probably because the quality of the sound will be affected.
Volume control cables are an option too. However, the quality as mentioned earlier, would drop too. In addition, it's such a chore. I don't know what can be done to solve this problem, but I'm definately not satisfied after the change happened.
Any help is appreciated, thanks.

All
OK, I have just reverted my N200 back to the latest f/w (.20.04) with the 0-25 volume scale and have twice managed to get it to go back to an earlier f/w (.2.0) with the 0-40 volume scale.
Before doing the following ensure that you can consistently connect your player to your PC in Recovery Mode. You must have pre-installed the drivers from your CD or the website and connect the player while holding the Play button. Keep the button held until the New Hardware Wizard starts (if this is the first time into Recovery Mode) or you get the USB icon appear in the System Tray. If you get the USB icon, click on it and it should say "HI SPEED USB device attached to non-HI SPEED USB hub". Click Close on this window.</LI>
Check that you are in Recovery Mode by looking in Device Manager - it should show as Player Recovery Device and not as your normal player's entry such as N200 USB Device.</LI>
If you can't connect in Recovery Mode then investigate that first before continuing.</LI>
If you have any programs that start when you plug in your player, such as MediaSource, then disable them from starting (Tools, Settings, Detector in MediaSource). This step seems to be quite important as it stops your device from being detected half-way through the upgrade process - I think this is what was causing me problems before.</LI>
Connect your player in Recovery Mode as outlined above.</LI>
Run the earlier f/w file (.2.0 or earlier for the N200 have the 0-40 scale).</LI>
The Searching for Devices box should show - wait and do not press Cancel.</LI>
You should then get "Media State Not Initialized" - click OK.</LI>
Check the Format Data Area box and say Yes to the next window.</LI>
Press Start - the upgrade should start with Allocating Tables and then continue.</LI>
When Complete is displayed press Close.</LI>
Player should now have earlier f/w on it with 0-40 volume scale.</LI>
So, in the end, it was quite a simple procedure to get back to the 0-40 volume scale. Remember that you will lose any enhancements to the f/w such as support for 3 levels of sub-folders and Thai language support so you have to make a choice on what is most important to you.
For the Nano Plus you can try version %20Firmware%20.03.02].03.02. Not sure if this was 0-40 though.
For the TX FM you can try .5.0.
PB

TS1702 I am unable to retrieve my Daily Mail Newspaper (iPad edition) in the Newsstand. I have already deleted and attempted to reinstate it but am now told this is no longer available, however I know this is not the case!

I am unable to retrieve my Daily Mail Newspaper (iPad edition) after deleting the icon as the daily edition was not appearing. I finally found it only to be told this is no longer available however I have a subscription vaild till 2013 which I am currently unable to use ! Ay ideas as to how to download , retrieve this successfully. I have rebooted etc made all the usual attempts..please help ASAP

I am unable to retrieve my Daily Mail Newspaper (iPad edition) after deleting the icon as the daily edition was not appearing. I finally found it only to be told this is no longer available however I have a subscription vaild till 2013 which I am currently unable to use ! Ay ideas as to how to download , retrieve this successfully. I have rebooted etc made all the usual attempts..please help ASAP

I know this is not right...

Okay, so my charger has been getting very hot lately, that, at the connection part, where I plug it in. The casing gets very soft, and has started to lose its shape, and has cracked... And when i smell it, it smells like a faint hint of burning plastic. What should I do? Am I covered?

No, for it to smell and get soft is definitely dodgy. If it is less than 12 months old you would be entitled to a replacement. If you are under Applecare call them and discuss your problem.
If it is not covered by any warranty you should seek to replace it anyway.
Be reticent using it until you get this rectified - you don't want to start a fire or damage your iBook. It is not a matter to procrastinate.

Where can I download Firefox 7 from? I know this is not the latest version, but I need to explicitly install this particular version.

I simply need to be able to download (and install) Firefox 7, even though this version is outdated.

Hi barryr,
You may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. That page is no longer being maintained by Google.
You should try changing your home page to:
about:home
If you don't know how to change the home page, you should take a look at the Knowledge Base article [[How to set the home page]].
Hopefully this helps

I know this is a dead product forum but...

Small Business - 25 user
My personal feeling is - only an idiot would put a Firewall software on a
Server so:
Firewall / Spam/Anti-Virus done via external Watchguard type
gateway - no need to tie up server resources
Print is via Print Server no need to bogg down server when these
things cost 50
File - for 25 user, 3 main groups (need about 300Gb space - shared and user
data)
Email -GW - about 10 users are heavy mail users (3 domains)
BackupExec and Tape for backup
Anti-Virus
Needs Remote access for 5 users (Accounts programe, CRM, Payroll)
No SQL required
Windows SBS or OWS as there is NO Novell SB any more)
What would you use and Why ?
Hardware Specification
Same again for 50 users
Currently using Windows NT
Let us say NO real knowledge of Linux and therefore feel uncomfortable.

LOL, get off NT :-D Love it.
This kind of question always brings me back to the old Word Processor
Question, "what is the worlds best Word processor?" the answer is,
naturally WordStar, err, oops, sorry ... "the one you know best "
Darn I still get that one wrong!
Are you comfortable with NW65? Do you know and Love GW? If so why
change. If you go down the MSBS route, in 18 months they will find a
bunch or reasons why you have to get off NT. The Exchange will be 64
bit only etc, etc.
NW 65 has 9 years of support, in that time I believe that you will be
doing a whole bunch more 'nix stuff. By following the OWS you can
change over as and when you wish without additional penalty. When you
want to try a Linux based server you just add it into the tree and off
you go...
What most folk refuse to accept is that OES on Linux was just the
first step, bringing the features that we have had for years on NW
onto the Linux Platform. The real test is yet to come, what does
Novell produce with OES 2 next year. At that point there will be some
real drivers to go there and you would be able to if you wish.
Lastly just to stir the pot a little more, do you remember MODESTO? it
was to be NetWare 7.0
Well the reason that XEN changed from v2.0 to V3.0 so quickly was the
inclusion of the code that Novell had done for Modesto.. So NW65 on
XEN is NetWare 7... have a look at this 1998 article on the subject
http://support.novell.com/techcenter...d19980504.html
Enjoy
Tim
Tim Heywood (SYSOP)
NDS8
Scotland
(God's Country)
www.nds8.co.uk
In theory, practice and theory are the same
In Practice, they are different

Itunes will open but the store will not, tells me connection is unavailable and yet I know this is not true, as I am on the internet writing on this website....Please help?

Itunes will open but Itunes store won't. Tells me there is no internet connection and yet I am able to write this question on your site! Can anyone help, as I can't update Ipod without it?

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

I know this is not the place to post but other locations not helping

i was at a big box store web site over x mas and it asked me to down load a new version of flash, when i did and went on to some sites, safari,, or firefox would shut down,, what do i do?
please give step by step instructions

First, go to the Safari forum here
http://discussions.apple.com/category.jspa?categoryID=169

I need help with the Media Encoder, but do not see a forum for that

I'm having difficulty with some large Windows Media Files--200 to 300 MB--using the CS4 Media Encoder to encode into FLV. Is there a file size limit for source files? I moved the files locally to remove any network issues. If this is not the correct forum, pelase advise.
Thanks!

http://forums.adobe.com/community/ame

When I request a software update, i am told my software is already up to date but I know it's not. how can I fix this?

when I request a software update, i am told my software is already up to date but I know it's not. how can I fix this?

The pre-2006 iMacs this forum covers cannot run any higher than OS10.5.8, and Apple pretty much stopped pushing out any updates for anything other than the current version.
If your iMac is a newer model (covered here: iMac (Intel) forum) you can run at least 10.6.8, available for purchase rather cheaply here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and it's possible you can run higher depending on your iMac variant. So find your iMac variant, please do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info" button to get this screen:
Please tell us the code name ans number for your computer in the line I've indicated with the red arrow. For an iMac, it will either be in the format, "PowerMacX,X" or "iMacX,X" depending on the age of your iMac. The trailing numbers where I put Xs will help us help you determine what exact variant you have and what upgrade options are available.
Also tell us how much RAM is installed. Newer OS versions often need more RAM that older iMacs shipped with.

I know this is not a Toad forum....

Similar Messages

Maybe you are looking for