I Know Why Your Router Doesn't Work---Maybe!
Did your wireless router recently just die for unknown reasons? Did the computers and other items connected to it fall off?
Question... Did you recently install the newest updates from Microsoft? If you did, there is a real good chance that is what caused it!
After I installed the Component Services 3.0 updates from MS, my entire network blew up! Nothing connected, I lost my internet, etc...
I pulled my system back with an old restore point and low and behold, I was able to get my internet back... however, I was not able to get the router to work. After much consideration, I reinstalled the router software and tah dah, it works, and it remembered my settings.
Don't believe me. I just installed the Component Services 3.0 on my laptop this morning... and it lost it's internet connection too. I created a restore point just prior to installed the Auto Updates and (boy I'm glad I did) and again, ended up restoring to the prior save.
Good Luck... And God Bless America!
Cheers... Marco
kbas114 wrote:
My this all started happening to me before I installed the latest updates from Microsoft, I only installed them thinking they might help me regain connection.
Hi
sometimes updates are for good , sometimes for Bad ofcourse.
Like a two faces of coin . its true , there might be a small update in windows firewall or something which forced the first guy to loose the connection .
at the same time , there might be some file missing or an error which was interruption the last guys internet connection which got reolved after installing the updates .
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com
Similar Messages
-
Who knows why the "repaint()"doesn't work when ....?
I use a "while(threadgroup.activeCount()!=0){} "to block the sentence below
from being excecuted before I finish the thread above, however since this "while"
the repaint() in the thread above doesn't work , but I have evidence that the thread
is really going on ( I use Sytem.out.print() to prove this)I'm not sure I follow. Try providing a snippet of the relevant code, and we'll see if anybody on the forum can figure it out for you.
-
I don´t know, why event counter doesn´t work
Hi, I have a problem. I use DAQ 6221 and when I configure in test panel of Measurement & Automation the edge counting, this is functional. Now I trie to run the code example of DAQmx ANSI C Dev, CntDigEv_Fn and the code ran, I hadn't problem, but the counter wasn't functional. I don´t know what's wrong. Please If somebody know, please tell me. It´s very important.
Hi,
The first thing that I would make sure is that you have the correct device number in the example you are trying to run. That is, the default for this program is dev1, and if this is not the same as in MAX then obviously your program won't run. So, make sure that these are the same, and let me know either way what happens.
George -
Routing doesn't work in my C# code
Hi guys,
I'm trying to make routing from an old aspx-page to the new one using the following code:
routes.MapRoute(
name: "Default",
url: "auto-vhd.aspx",
defaults: new { controller = "autovhd", action = "Index" }
This code dosen't work. But if I remove extension - url: "auto-vhd", it works fine. It also works fine for other pages' names, which don't contain special symbols, like '-'.
Does anyone knows the reason why the code doesn't work for url: "auto-vhd.aspx"? How can I fix it?
Thanks,
AlexPlease use the ASP.NET forums for ASP.NET related questions:
http://forums.asp.net -
I'm new with flash and don't know why the timers don't work like i would expect. In VB.NET timers are how you move stuff, but it doesn't look like they are ideal for moving stuff in flash at all (really slow). I'm making a game in which you throw a ball around the screen. i am using a timer to get the ball to move. this doesn't work well for 2 reasons; 1: the ball jumps alot, and 2: the timer should eventually run out of time. If anyone can help, i'd be thrilled cus this is my first post here, so yeah
Timing for movement would be more often dealt with using something that operates at the frame rate of the file. The ENTER_FRAME event is usually selected for this purpose.
stage.addEventListener(Event.ENTER_FRAME, moveBall);
function moveBall(evt:Event):void {
// your positioning code
You could use a Timer to control when to stop the listener from being active. -
hy, does anyone know why my computer doesn't recognise my iphone? I can't seem to make it see the personal hot spot any suggestions? thanks
Did you update to iOS 7? If yes you need to update iTunes on your computer to iTunes 11.1
If you are using iTunes 11.0 and iOS 6.x then show the left sidebar in iTunes.
When in iTunes on your computer use the View menu to View Sidebar. The device should show up there when connected. -
I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
How to use documentbeforesaved method? And why my code doesn't work in template files?
Can someone help me with these two codes?
----Beginning of code 1-------------
Private WithEvents App As Word.Application
Private Sub Document_Open()
Set App = Word.Application
End Sub
Private Sub App_DocumentBeforeSave(ByVal Doc As Document, SaveAsUI As Boolean, Cancel As Boolean)
MsgBox("BeforeSave")
End Sub
--------------End of the code----------------
Beginning of code 2--------------- Code 2 is from https://msdn.microsoft.com/en-us/library/office/ff838299(v=office.15).aspx
Public WithEvents appWord as Word.Application
Private Sub appWord_DocumentBeforeSave _
(ByVal Doc As Document, _
SaveAsUI As Boolean, _
Cancel As Boolean)
Dim intResponse As Integer
Private Sub App_DocumentBeforeSave(ByVal Doc As Document, SaveAsUI As Boolean, Cancel As Boolean)
MsgBox("BeforeSave")
End Sub
In the first code, they have:
Private Sub Document_Open()
Set App = Word.Application
End Sub
I test these two codes in "This document" object, and I find out the first code works but the second code are not!
Why second code doesn't work?
Extra question: I am using microsoft 2013. I insert this code into a macro-enabled template. But when I am about to save my file I am expecting these code works. However, they didn't work!
Thank you for solving these problem for me!Hello,
Please note that the code snippet 2 in your post is different from the code snippet in the MSDN document. Also please read the comments of the MSDN code sample:
This example prompts the user for a yes or no response before saving any document.
This code must be placed in a class module, and an instance of the class must be correctly initialized to see this example work; see
Using Events with the Application Object for directions on how to accomplish this.
Public WithEvents appWord as Word.Application
Private Sub appWord_DocumentBeforeSave _
(ByVal Doc As Document, _
SaveAsUI As Boolean, _
Cancel As Boolean)
Dim intResponse As Integer
intResponse = MsgBox("Do you really want to " _
& "save the document?", _
vbYesNo)
If intResponse = vbNo Then Cancel = True
End Sub
So the problem in your code snippet 2 is that you didn't put it into a class module and initialize the class module. If you just put it into ThisDocument, you have to initialize the word application object.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Does anyone know why my dvi adapter quite working
does anyone know why my dvi adapter quite working for my Imac. it worked fine one day and like a week later it didn't
WordPress takes a LOT of web server space. If you have adequate bandwidth, that should not be a problem.
In your source code, this is the path to your first banner image which cannot be found.
http://chumpspotter.com/chinapalace/restaurant/banner1.jpg
If your images are on that domain, in which folder are they?
Nancy O. -
I've a ipod nano general 7, I've just used it one year. Now, I can't charge the battery. When charging, the icon shows full power. But when I disconnect, the ipod becomes dark, no power is keeped. Why, the battery doesn't work ? the life of my ipod's battery is too short ?
Howdy tamsg,
Welcome to Apple Support Communities.
The article linked below provides a lot of great troubleshooting tips that can help you resolve the issue with your iPod nano charging or displaying a blank black screen.
iPod nano (7th generation): Hardware troubleshooting - Apple Support
So long,
-Jason -
Why the preloader doesn't work in IE 8 but works in FireFox?
Why the preloader doesn't work in IE 8 but works in FireFox?
Please see the attached files. Thanks in advance.Why doesn't the preloader work in IE8?
What's "virtual sandbox"? -
hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me
Go to
http://bt.custhelp.com/app/answers/detail/a_id/47531
and follow the instructions
This was put up by BT several months ago as part of the advance notification that the Yahoo service through them was closing -
Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D
sounds like the cable or the iphone connector are somehow damaged
-
Why the imsg doesn't work without a sim card with iOS 7???
Why the imsg doesn't work without a sim card with iOS 7???
If it worked for you using iOS 6, then it appears iOS 7 has made some changes. Was it working before?
-
HT1695 How to know if your router is outdated to connect to an iPad 2
How do you know if your router is too outdated to connect to an iPad2
Google it, and make sure you have its latest firmware.
Maybe you are looking for
-
I have a project where I had to start using sourcesafe for version control (two developers, have to share code etc). Since checking in the project, i have one file with a breakpoint that I can't remove. Anyone know where breakpoints are defined in th
-
Problem to compile InsuranceLogin.java on NT
Hello, When I do: javac -classpath $CLASSPATH -d $ORACLE_HOME/ifs/custom_classes *.java i have the following answer: Can't find class sun/tools/javac/Main Thank you for your answer null
-
BR0278E - Access denied in oracle backup and redolog backup
Hello All, I have been trying to take a redolog backup from DB13 and I am getting the below error BR0278E Command output of 'E: && cd E:\oracle\QAS\102\database && E:\usr\sap\QAS\SYS\exe\uc\NTAMD64\brtools.exe -f copyfile 12.6.2.0\Backup\hostname\QAS
-
Do I have to leave the non-compatible apps in my itunes apps list?
I finally figured out how to download apps compatible with my ipad1 running 5.1.1, but 2 of the apps ended up not having a 5.1.1 version and would not install after downloading b/c they needed a newer version of the sotware. They do, however, show u
-
Using Volume Keys to Change Walkman Tracks
Hi Guys, Is there a way to change the playing tracks in walkman app without going to the screen? In my previous walkman phone, you could do that by long pressing a volume key or even shake control I heard in other models. Not able to do that in Z1. S