I left a negative feedback, and now the seller won't stop emailing me.

I bought an item on eaby, and it was completely different from the picture, and honesty, just terrible. I'm not someone who jumps to leave a negative review, and this is the first time I've ever, ever done it. I left a negative because I think it's wrong to misrepresent a product. Ever since leaving the feedback, the seller has contacted me every day, sometimes twice, telling me to change my review. I'm not changing it. I left an honest review. The end. I want no further contact with this seller. How do I make them stop emailing me?

Well, I'm sorry to hear that you had a crummy experience with this transaction. Sometimes, if you let a seller know ahead of time that you are unhappy with your item, they might make amends, but it is completely within your right as a buyer to expect to get the item you bought the first time around so..... Assuming the messages are coming via ebay messages and not your personal email, you'll have to sit down at a desktop or open a web browser on your phone and log into your account. Go to your Messages. On each one, there should be a section at the bottom that looks like what I have attached below. Go to the Report an inappropriate email and follow the instructions. Do this for EVERY message that you've been sent by this person. I don't know what good it ever does but this is what you can do. Report them. For each message sent. When a seller makes a Feedback Revision request, they are warned by ebay NOT to harass the buyer to do comply. The seller really should know better than to do this to you. I too have a problem with unwarranted and unwanted messages from a fellow ebay member (not a customer) who has been reported by me to ebay multiple times and long-ago blocked but still has somehow managed to circumvent it to continue to contact me. In the most recent message, he suggested I have marital relations with a pig. He also told me he has run out of his meds. I don't reply to something like that. I would suggest you not either with this seller. Eventually, someone else will leave bad feedback for this seller and you'll be off the hook. Good luck as you carry forward.

Similar Messages

HT4367 just bought an apple tv and updated it and now the light won't stop flashing... even after i tried to restore via itunes and all i got was a unknown error message... hey apple you guys have a fix for this?

I just got an apple tv and it dosen't work at all. I tried to use the home share feature with my iMac and both devices don't see each other, yet they are o the same network. I am not using a apple router. I tried updating the apple tv to see if that would resolve the issue but now the status light just blinks rapidly. I tried using itunes restore it but all i get is an unknown error. So with all of this said what is the fix apple?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

I Have just returned from a 2 week vacation and had left my iMac plugged in, I noticed we suffered a power cut during our absence from home and now the iMac won't power up, help !

I Have just returned from a 2 week vacation and had left my iMac plugged in, I noticed we suffered a power cut during our absence from home and now the iMac won't power up, help !

What have you tried?
A safe boot?
A recovery boot?
Allan

My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

Now iTunes will not recognize my phone as a device...

Hi All, I have just applied an update to Photoshop CC and now the product won't open. I get an error

Hi All, I have just applied an update to Photoshop CC and now the product won't open. I get an error message 'Photoshop.exe - Entry Point Not Found'... any suggestions?

It won't open at all... that's the problem. When I try to execute the program, I get the 'Photoshop.exe - Entry Point Not Found' error message.

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.

I just bought a macbook pro and the mountain lion free update applied correctly but the internet went down and now the download won't appear/ continue, and when i open the app store it requests me to pay for the update? what can i do?

i just bought a macbook pro and the mountain lion free update applied correctly but the internet went down and now the download won't appear/ continue, and when i open the app store it requests me to pay for the update? what can i do?

Welcome to Apple Communities
http://www.apple.com/support/mac/app-store/contact

Mom used comp....and now the dock won't appear

Hi,
My mom used my scanner/printer recently and when I went onto my comp to use it there was a dialogue box that I couldn't click out of so I restarted it and now the dock won't appear when I hover at the bottom of the screen.
I had a similar problem this summer when I turned of the comp and moved it into another room to find that my desktop wallpaper had disapeared and I still havn't been able to reload it.
Can someone help me figure out what's wrong? Thanks in advance
Imac G4 Mac OS X (10.4.3)

Hello wandering:
Try trashing the dock preference file and restarting:
com.apple.dock.plist
Barry

I updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

To show the battery percentage used go to settings
from there click general scroll to usage and select
scroll to bottom of page for battery usage select on.
This will show the icon battery and the percent numbers on the top right.
When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct.

HT201274 I have an iphone 3g and I did the "erase all content and settings" and now the hone won't go further than the apple phote screen. I have left it over night and still the same?

I got an Iphone 3g from a frind , i went and pressed the "erase all content and settings" and now the phone doesn't pass the apple logo window. It stays over night and I after I connect to computer, itunes nor the pc detects it?
What Can I do to get get back to at least the basic or factory settings?
Regards,
Rafael

Recovery Mode: http://support.apple.com/kb/HT1808

10.6.8 update crashed before it completed and now the Finder won't launch

This morning I was installing the update on my 25" iMac 2.8 GHz Intel Core 2 Duo (was at 10.6.7) and after almost 15 minutes of the installer claiming to be moving files around, the screen went blank except for being backlit. After few minutes of pondering what to do, I restarted the computer and the "Finder quit unexpectedly." message started and all my iMac wants to do is have me send thousands of reports to Apple. I tried the safe restart and nothing changed expect the process number in the reports restarts in the low hundreds.
I have LOTS of applications on my dock and while most of the Apple applications (Safari, Disk Utility, etc.) crash upon launching, a few applications don't (Firefox takes a few minutes to crash while Chrome seems okay enough for me to send this report). The "About this Mac" claims that 10.6.8 is installed, so Software Update claims there are no updates, so I can't use that to reinstall the update (I'm not sure I should even if I could).
Because I cannot do is relaunch the Finder from either the Dock or via the "Force Quit" command I can't reinstall 10.6.8 via the. I can open a terminal window but I'm not sure what to do with that to get me out of this situation. I downloaded the combo update but without the Finder running, I don't know how to launch it via the a terminal window. Any suggestions welcomed.
TIA.

I've got my Mac back!
Even though the Finder wasn't running, because I had populated my Dock with dozens of applications, I was able to launch the Terminal app and open a window. From there I was eventually able to launch the Installer, point it at the 10.6.8 Combo Update (for some reason, fortunately, I had downloaded it rather than letting Software Update do it), and wait at least 30 minutes when the installer claimed that there was less than 1 minute left to complete the install. After it was done and I restarted the Mac, it no longer insisted that I needed to send/ignore thousands of "Finder quit unexpectedly." messages and the Finder was running.
BTW, towards the end of the installation (or re-installation), the Finder began to function (my desktop icons appeared and I could open folders) and now the only remaining issue is the Menu Bar won't appear unless I click the Finder in the Dock.
Thanks to those who helped me by providing the instructions needed to use the Terminal window correctly.

I had to return my first Ipad2, and now the new won't connect to itunes. I verified I had the latest itunes, used the new cable and verified the port worked by syncing with my ipod, I reloaded 10.2.2 and restarted my PC. Still won't work - thoughts?

I had to return my first IPad2, and now the new one won't connect to iTunes. I verified I had the latest version, used the new cable and verified the port worked by syncing with my iPod, I reloaded 10.2.2 and restarted my PC. Still won't work - thoughts?

Sorry - found a couple of good threads right after posting.

I installed Firefox 29 on my Mac and now the computer won't go to sleep.

I have a desktop Mac 10.6.8 with OS X. I recently did a software update with Firefox 29.0 and now my computer will not go to sleep. Do I need to revert back to an earlier version of Firefox?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

I tried to update the iTunes software on my iPhone today, and now the phone won't work unless I "restore" it. I don

I tried to update my iTunes software on my iPhone today and plugged it into my laptop. Before the process was complete, I received an error message saying I had to "restore" my iPhone before it would work with iTunes. Even more importantly, and troublesome, is the fact that now my phone won't even work at all. I can't turn the iPhone on, and all the screen shows is the iTunes icon with a picture of the white power cord. Can someone advise if there is a way to update the software without restoring my iPhone, which will cause me to lose everything on the phone (much of which I have not backed up yet)? Last, is my stuff already backed up by iCloud? I believe I have sellected that option on my phone, but honestly, have never really understood what iCloud is or does. Thanks in advance for any assistance/advice.

why dont someone answering gthis ******* problem..

Why is my iPod touch 5 screen unresponsive? I accidentally dropped it and now the screen won't do anything. I've tried resetting it over and over again but nothing is working. Can someone tell me what is going on? Thanks

My iPod touch is being unresponsive. I accidentally dropped it screen down and now when I go to slide to unlock it, it won't work. I've tried numerous times at resetting it, holding the home and sleep/wake button until it resets, with no luck. The Wi-Fi isn't even connecting. And the notification pull down screen and the pull up screen isn't present either. Would really like to know what is wrong with it. Thanks.

Try the following but you likely have a hardware problem:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I left a negative feedback, and now the seller won't stop emailing me.

Similar Messages

Maybe you are looking for