I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?
I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers / Headphones
Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it.
Similar Messages
-
We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up
From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions. -
my iphone does not pop up under devices when I plug it into my new macbook pro. Any ideas?
iOS: Device not recognized in iTunes for Mac OS X
-
I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?
See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747 -
Can I transfer the hard drive from my Macbook into a new Macbook Pro?
I have been planning on purchasing a Macbook Pro for quite sometime now, however I find that the storage space on the base models is quite small. I currently have a 500gb hard drive on my Macbook, and I was wondering if there's any way I could transfer this hard drive into a new Macbook Pro.
If you are considering to purchase Mac Book Pro is not Retina, you can get 1TB HDD as option with +$50.
-
Capture HDMI into a new MacBook pro?
Hello,
I was wondering if anyone knew a way of capturing HDMI into my new MacBook pro? I've had a search and cannot find anything. I'm not sure if any of the black magic products could do it? http://www.blackmagic-design.com/products/
Many thanks,
TomHi - If your MacBook Pro has an Express 34 card slot (I believe only the 17" Mac Book Pros have them now) then you should look at the Matrox products, like the Matrox 02 Mini for laptops:
http://www.bhphotovideo.com/c/product/618349-REG/MatroxMXO2MINIMAX_L_MXO2_Mini_Maxfor.html
MTD -
How do I import an iPhoto Library (V.7.1.5) created on my old MacBook (10. 6.8) into my new Macbook pro (10.9.1) running iPhoto 9.5.1? I tried copying onto memory stick and moving to new mac, but new iPhoto doesn't recognise the library.
So what exactly did you copy over? If it's a 12 gig iPhoto Library then it sounds like the files are there. Perhaps the copy went wrong along the way.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums. -
How do I install CS5 from CDs into my new MacBook Pro?
How do I install CS5 from CDs into my new MacBook Pro?
Buy a cheap external DVD drive, connect via USB and then install
Download CS5 Trial version from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html then activate with your CS5 serial number to convert to a permanent version -
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
I'm having trouble opening a word document on my new Macbook Pro. I opened it with no problems on my iPhone5. I tried using TextEdit and OpenOffice. Thanks!
I open Word documents on my Mac using Pages and textedit without any problems.
I also have a copy of OpenOffice and it can also open Word documents without any problems.
Could you please provide more details on exactly what you mean when you say you having troubles opening Word documents? What kind of troubles?
Allan -
I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?
Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it. -
Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?
Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
However, I suspect you zapped the Mini, maybe the lower voltage part since you siad the fan works.
The power surge could have went into HDMI and damaged the TV.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please?
See if this helps
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch -
I get this message when syncing my Ipod touch "itunes can not back up the ipod because a session could not be started" any ideas?
Have you looked at the previous posts on the right side of this page under the heading "More Like This" with your same problem?
Maybe you are looking for
-
ADF 11.1.1.2 application - Jmeter Stress testing issues
All, I followed Chris Muir's blog and was trying to do stress testing of my ADF application. I have a login page before going to application pages, I am getting below message for the application URLs: <html><head><meta http-equiv="refresh" content="1
-
Hello, I have an image of a fish, and when you roll your mouse over it, it gets swapped with a film loop - showing 3 bubbles coming out of its mouth. However, when you roll over it, the film loop pushes the fish down for some reason. They all have th
-
Has Photoshop CS5's Memory Handling Gotten Worst with Updates?
Hi, For the last year + I've been running: Photoshop CS5 Windows 7 12 GB RAM - 7GB allocated to Photoshop, although Windows Task Manager can show as much as 11GB being used by Photoshop. Asus P6T Deluxe v2 Motherboard Latest nVidia and now latest ATI
-
Ipod away from computer for 1 year
Hi, if anyone has any advice I'd be very grateful. I'm travelling and will be away from home for about 1 year. If I take my ipod (ipod photo) and a travel charger, will the music "last" for a year without being updated from the computer? I'm worried
-
We realtors use MLS constantly. In our community the address is www.nnerenmls.com I can search for properties, but as soon as I select one to gather more information, and then go back to the search results, I get a message saying that Mozilla does no