I-Link DSR-450WSP doesn't work

Hello,
I've got a Sony DSR-450WSP connected true firewire on my FCP system. The settings are FireWire Pal & DV PAL 48Khz Anamorphic. Status VTR is OK but I do'n t have remote controle of the camera so I can't log and capture clips; I can only capture when device control is non controled device but than I do'nt have timecode.
Best regards,
Wim

I can only speculate that there is something on the camera you must set to turn control over to remote...
Patrick

Similar Messages

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Broken links report generator doesn't work

I found a website that didn't work with Firefox 3.6.15. I selected the Report broken website menu item. Typed in the problem description and clicked the Submit button. The popup broken link report continues to show 'sending report' with an in progress bar for the last 10 minutes! Apparently report sw cannot contact Firefox server to send report.

Mozilla Website Evangelism has ended, the '''Report Broken Website...''' function is gone in 4.0 & later versions, and the server was shutdown in December - which is the problem you are experiencing. You can use the Submit Feedback... feature in the Help menu in 4.0 & later, but if the report is about a website that doesn't work properly in Firefox, Mozilla isn't going to contact the website and encourage them to fix their issues.

Contextual menu on links in mail doesn't work

I had hoped that this annoying bug was fixed in release 10.10.1 of Yosemite. It is not and I have to ask the question.
There is a contextual menu in mail if you option click on a link:
The problem is: it doesn't work! All the three options do nothing. I submitted it to Apple but unfortunately it wasn't fixed. Somebody else has this problem and was able to fix it? It is quite annoying, like almost everything these days in Yosemite.
I've don't a clean install of Yosemite several times. Didn't fix.

Hi cchauvin08,
If you can't post your page on the web for others to see,
then perhaps you can paste the relevant markup/code. For example,
what type of inputs are you using? You said "text box" do you mean
a TextArea or a TextField? What does the widget constructor for
that particular validation field look like? What does the markup
look like, including the markup for the <form> tag?
We're going to need more info due to the fact that some of
these validation widgets have multiple configurations (types of
validation).
--== Kin ==--

TS3999 Argentina holiday link for iCal doesn't work, please help!!

İ want to add argentina holiday calendar to my iCal but the link on apple page doesnt work.

As you say the link doesn't work; neither does its originating domain alone. The note on the page concerned says that the calendar is valid only for 2010 and 2011, so evidently it's been withdrawn and not updated by its originator. I'm afraid that a number of the links on Apple's page have gone dead.

Save link as option doesn't work as expected anymore

When I formerly right clicked a link to a file (to download) and chose the option '''Save link as''', I was able to save the file to the location I specified.
At the moment this doesn't work anymore. When I click the same link as before and choose save link as, firefox wants to save the .htm page instead of the .csv file.

You can try "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

LInks over shape doesn't work

I just recently reformatted my iWeb pages and I love them. The problem is that most of them are buried under a pictures category (I want them that way). When I created hyperlinks in iWeb it changed the color of my font. So I inserted a shape behind the text and put the hyperlinks there.
That doesn't work. I also tried putting the hyperlinks back on the text and when I publish, they don't work either. I like the shapes and don't want to remove them. How can I keep the pink shapes under my pictures page and keep the text white?
http://web.mac.com/kryst1012/iWeb/Krystin/Photos.html

Keep all of your shapes right where they are! To make your text into hyperlinks then, just insert another shape...make it big or small enough to cover your text. Go ahead and drag it right over your text. Now attach the hyperlink to this shape. Now in the INspector,click over to the Graphics tab and change the opacity of this shape to 1%.
You have now created a "hotspot" hyperlink over your text! All without moving any of your other shapes around! Publish and see the results... Let me know if it works out for you!

Object link BOM header doesn't work

Hello,
We are in version 4.6C (standard) and I have a following problem with DMS.
I have created a document type and assigned object links STKO_DOC BOM header (screen 258). I have created other document type quite similar, just with different object links, and they work just fine. However, when I create or change my document type with tra CV01N or tra CV02N I cannot see the sheet for assigning the BOM header. I have no error messages. I have tried to compare to the standard document types and simply cannot find out what's wrong.
If I go to the tra CS02 (BOM) to assign my document - I cannot - because the list doesn't show it even though I can see it using CV02N -- CV04N.
I tried to add also object link BOM item (screen 257) but without help.
Can anybody help with this - thank you in advance.
Pipsa

Dear Pipsa,
please see SAP note 956853 and make sure that the necessary objects are maintained correctly in customizing.
Best regards
Christoph

HT1338 Dual Link DVI Adapter Doesn't Work

I have a brand new MacBook Pro with Retina which replaced a 17" MacBook Pro. The 17" machine was connected via an Apple-branded Dual Link DVI adapter to a Dell 30" (2560 x 1600) external display - the best I can get the MacBook Pro/Retina to do is 1600 x 1000 using the same adapter that the 17" was using.
I have run all system updates - including one that was targeted at stability/support for external monitors - still cannot get better than 1600x1000 resolution.
Any advise?

Didn't find this answer on a general search, but once I submitted my post, the MORE LIKE THIS bar (right side of screen) showed up and gave me the answer! See below:
Update from Applecare: this problem made its way to engineering and they pointed out a 'hidden' way to fix this with no special 3rd party software:
When you bring up the resolutions for a given display, as its set to 'best for display' hold down the 'option' key while clicking 'scaled'. The scaled menu should now show all the resolutions supported by the monitor. On my Dell it shows 2560x1600 and everything works fine when I select that.
I held down OPTION and re-clicked SCALED; all resolutions came up and I'm now good to go!

Mini DisplayPort to Dual-Link DVI Adapter doesn't work on Battery Power

When I'm using the Apple Mini DisplayPort to Dual-Link DVI Adapter to connect a MacBook Air 13" to a 27" Display, it only works as long as the Power Adapter is connected. In other words
Can anyone tell if this is normal behavior?

Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

Unable to install Captivate 8 on my Macbook Pro. Akamai Download Mgr won't install and direct link to file doesn't work. Help!

I get an error message when trying to install the Akamai Download Manager Installer. When I click on the link to download the files directly, it does nothing. I've tried on Chrome, FF, and Safari. I'm running OS 10.9.3. This is for my laptop at home; I've had no trouble installing it at work on an iMac.

clear your adobe.com cookies if you're getting a header error here, http://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate

Links on Homepage doesn't work.

Hello,
I created some homepage on a R3 backend linked to an iview on a producer. The iview is then remoted in a federated portal role.
With some test user, the links in the homepage works correctly. But when I login with my user (which has several other roles), unfortunatly the link don't works.
For information, we are using an LDAP for the login.
Thanks in advance for your help.
Regards,
Julien

Hi Julien,
There could be several reasons for the links not working for you and at the same time working for some other user. Please check for the permissions for the iviews (end user). Also, check is there any difference b/w the browser you are using and that being used by other user. Do check for any traces in the log files (defaultTrace.trc).
Thanks,
Nikhil

Links button rollover doesn't work

I've checked the code & all the links should work. Any
ideas? All the other buttons work beautifully.
koi

Impossible to tell. Can we have a link or the code or
something...?
Andy

Link to action doesn't work in a POWL application

Hi,
I have developed a web dynpro ABAP application and it is called by portal,
This WD calls standard POWL, in a POWL there is a LinkToAction field.
When I click on field the system should open a new window (shopping cart detail),
but it doesn't happen anything.
which could the problem be?
Thank you.
Best regards.
Al

Hi Alberto,
1. Define an Action (corresponding to your Link to action which is typically the FIELD Name of the column in POWL Table) in your POWL feeder Implementation "IF_POWL_FEEDER~GET_ACTION" .
IF_POWL_FEEDER~GET_ACTION is a standard object of custom feeder class, how can I define a new Action?
<Vineet> See the Wiki Link http://wiki.sdn.sap.com/wiki/display/WDABAP/DocumentationInformationabout+POWL
This has a document (POWL.doc) for POWL, refer page number 20. You can use parameter C_ACTION_DEFS for explicitly defining Actions.
2. Handle the defined action in another feeder implementation "IF_POWL_FEEDER~HANDLE_ACTION".
this code could be rigth?
METHOD if_powl_feeder~handle_action.
FIELD-SYMBOLS: <shopping_cart> TYPE STANDARD TABLE.
IF i_actionid = 'SELECTION'.
triggers the event
e_portal_actions-fire_wdevent = abap_true.
Pass parameters to event
ASSIGN c_result_tab TO <shopping_cart>.
i_shopping_cart = <shopping_cart>.
selected row
READ TABLE c_selected INTO ls_selected INDEX y_index.
Read selected POWL data
READ TABLE i_shopping_cart INDEX ls_selected-TABIX INTO s_shopping_cart.
CHECK sy-subrc = 0.
Pass parameters
ls_parameter-key = 'OBJECT_ID'.
ls_parameter-value = 'I_'.
APPEND ls_parameter TO e_portal_actions-parameters.
ENDIF.
ENDMETHOD.
<Vineet> Seems good provided you have defined the action name in "your class->IF_POWL_FEEDER~GET_ACTION" as 'SELECTION'.
3. Now you need to raise an portal event from the method "IF_POWL_FEEDER~HANDLE_ACTION".
where a portal event has to be raised?
<Vineet> You have alrday raised it when you used "e_portal_actions-fire_wdevent = abap_true", as above you can additionally pass parameters as you have done in pushing some data in "e_portal_actions-parameters".
4. This Portal event will be again captured in the event "POWL_FOLLOW_UP" from POWL WD component "POWL_UI_COMP"
<Vineet>Let's assume your WD component is "MY_COMP" which uses "POWL_UI_COMP". then in the component controller or View you can handle an event "POWL_FOLLOW_UP" which is a POWL Interface event. This vene has the same action "SELECTION"a nd the parameters which you have raised from "your class->IF_POWL_FEEDER~HANDLE_ACTION".
5. You can handle this event "POWL_FOLLOW_UP" in your WD which uses "POWL_UI_COMP" and throw a pop-up from your WD component.
it is not clear point 5.
<Vineet> From the event handler of "POWL_FOLLOW_UP" you can launch another webdynpro in a po-up or a new winmdow.
Please let me knwo in case you face issue.
Regards
Vineet
thanks.
Best regards.

Upgraded to 8.0.1-send link in gmail doesn't work-Tried all send link ways

Vista 32 bit-Windows 7-Just upgraded to firefox 8.0.1 from 3.6 -Tried to send web page in Gmail link from File and Share and right clicking on Share Using Gmail. My Speed Dial page keeps coming up instead of Gmail. In addition, on top of Speed Dial page G Mail Manager log in box appears that says"Enter Account Info To Log In" but email and password are already there.
Upgraded because old version kept freezing. This one is horrible and not user friendly at all. I will be grateful for ANY help. Would like to uninstall and go back to old version but do not know how. Thank you.

I just got my emails again, not sure what did the magic, but this is what I did:
- Downloaded my enterprise certificates (device provisioining) - Maybe you don't have to do this step.
- Reset the iPAD (press power button and menu button until you see apple logo -> this doesn't erase data on the iPAD)
- Deleted the exchange account
- Created the exchange account - at this time the iPAD could confirm credentials
After a couple of minutes emails started coming again!
Btw, I had this issue after upgrading to iOS 8.1.1.

I-Link DSR-450WSP doesn't work

Similar Messages

Maybe you are looking for