I `ll get a new pc...what shall I do with my licenc-number of PS CS4?
I`ll get a new pc.....what shall I do with my licenc -number of CS 4? Can I transfer it easely?
Based on the title, I would have Moved the post to the Photoshop>General Discussions Forum, but would also have taken credit (or blame) for the Move. As the OP has gotten the answer, I am not sure if a Move now is warranted, but maybe so? If Pat saw it elsewhere, not sure how it did get here???
Now, some posts do defy logical moving, as it's impossible to tell which Adobe product is involved. Also, some of the Adobe Forums can be very confusing - I always struggle with which Acrobat sub-forum would be best. I am sure that I guess wrong quite often, and only hope that one of the Acrobat MOD's will correct my error. At least they know who to blame! Also, I usually PM the OP, to let them know where their post went, and why.
Hunt
Similar Messages
-
My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?
What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
Good Luck and report back all what you tried.
Also report what change occured before this tragedy happened, was there a Software Update? A EFI firmware update? Etc.
https://support.apple.com/kb/TS3148
more:
https://support.apple.com/kb/TS2570
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
To use Safe mode, hold down the Shift Key while booting.
Other assistance
https://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379
https://support.apple.com/kb/ht1782
https://support.apple.com/kb/HT1564 -
How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?
How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0F
SMC Version (system): 1.57f18You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV -
I AM HAVING ISSUES GETTING MY NEW ADOBE PHOTOSHOP ELEMENTS 12 TO ACCEPT THE SERIAL NUMBER IT HAS GIVEN ME. SEVERAL MONTHS AGO I FINALLY MANAGED TO FIND THE ONLINE HELP AND THEY SPENT AN HOUR OR SO TRYING TO HELP ME AND THEN WHEN I WENT TO USE IT AGAIN AND SIGN IN IT WAS THE SERIAL NUMBER AGAIN AND SAYS IT DOES WORK. I NEED HELP. I'VE HAD THIS FOR NEARLY A YEAR AND CAN'T USE IT.
Error "The serial number is not valid for this product" | Creative Suite
if that fails to help you click 'still need help' at adobe support, https://helpx.adobe.com/contact.html -
Hi there,
On my iMac from 2009 - 3,06 Ghz Core 2 Duo with Mac OS X lion 10.7.5 (11G63) I'm having the iPhoto (8.1.2 version) making auto-shutdown with no reason;
Does anybody know what shall I do with it ???
Regards,
Miguel Sim.Hello again,
Process: iPhoto [2771]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1.2 (8.1.2)
Build Info: iPhotoProject-4240000~8
Code Type: X86 (Native)
Parent Process: launchd [141]
Date/Time: 2013-11-14 18:53:17.814 +0000
OS Version: Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report: 106324 sec
Crashes Since Last Report: 2
Per-App Interval Since Last Report: 634 sec
Per-App Crashes Since Last Report: 2
Anonymous UUID: 637A60DB-E15A-441E-BAAB-F21EF18FA1B6
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: 0x000000000000000a, 0x000000000cfbc000
VM Regions Near 0xcfbc000:
JS JIT generated code 000000000cfb4000-000000000cfbc000 [ 32K] rwx/rwx SM=PRV
--> mapped file 000000000cfbc000-000000000cfcc000 [ 64K] r--/rwx SM=COW /Users/USER/Pictures/*/*.jpg
TC malloc 000000000cfcc000-000000000d0cc000 [ 1024K] rw-/rwx SM=PRV
Application Specific Information:
objc[2771]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_c.dylib 0x9144ebe1 memmove$VARIANT$sse3x + 35
1 com.apple.ImageIO.framework 0x99396ca0 _CGImageSourceBindToPlugin + 300
2 com.apple.ImageIO.framework 0x99396b63 CGImageSourceGetType + 55
3 com.apple.CoreGraphics 0x939bdc4c CGImageCreateWithJPEGDataProvider2 + 166
4 com.apple.CoreGraphics 0x939bddc4 CGImageCreateWithJPEGDataProvider + 47
5 com.apple.iPhoto 0x001aa38e 0x1000 + 1741710
6 com.apple.iPhoto 0x0043d5a6 0x1000 + 4441510
7 com.apple.iPhoto 0x00448902 0x1000 + 4487426
8 com.apple.AppKit 0x9494f79d -[NSView _drawRect:clip:] + 3929
9 com.apple.AppKit 0x9494d7bc -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 2650
10 com.apple.AppKit 0x9494e193 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 5169
11 com.apple.AppKit 0x9494e193 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 5169
12 com.apple.AppKit 0x9494e193 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 5169
13 com.apple.AppKit 0x94947caa -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 4817
14 com.apple.AppKit 0x94940bd9 -[NSView displayIfNeeded] + 1365
15 com.apple.AppKit 0x94945872 -[NSClipView _immediateScrollToPoint:] + 6543
16 com.apple.AppKit 0x94943e2e -[NSClipView scrollToPoint:] + 234
17 com.apple.AppKit 0x94a34137 -[NSScrollView scrollClipView:toPoint:] + 279
18 com.apple.AppKit 0x94a33efb -[NSClipView _scrollTo:animateScroll:flashScrollerKnobs:] + 1533
19 com.apple.AppKit 0x94a3711c -[NSClipView _scrollTo:animate:] + 62
20 com.apple.AppKit 0x94a370d4 -[NSClipView _scrollTo:] + 48
21 com.apple.AppKit 0x94a3709b -[NSClipView _scrollPoint:fromView:] + 107
22 com.apple.AppKit 0x94a37029 -[NSView(NSPrivate) _scrollPoint:fromView:] + 50
23 com.apple.AppKit 0x94a36fef -[NSView scrollPoint:] + 65
24 com.apple.iPhoto 0x001c08e4 0x1000 + 1833188
25 com.apple.iPhoto 0x001bff5b 0x1000 + 1830747
26 com.apple.AppKit 0x949d1508 -[NSWindow sendEvent:] + 9384
27 com.apple.AppKit 0x94969f77 -[NSApplication sendEvent:] + 4788
28 com.apple.iPhoto 0x00229973 0x1000 + 2263411
29 com.apple.AppKit 0x948fbb21 -[NSApplication run] + 1007
30 com.apple.AppKit 0x94b8cac5 NSApplicationMain + 1054
31 com.apple.iPhoto 0x00124b80 0x1000 + 1194880
32 com.apple.iPhoto 0x00003172 0x1000 + 8562
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x9982ab5e __select_nocancel + 10
1 libdispatch.dylib 0x9c80bcbd _dispatch_mgr_invoke + 642
2 libdispatch.dylib 0x9c80a853 _dispatch_mgr_thread + 53
Thread 2:: Dispatch queue: CFPreferences Background Sync Queue
0 libsystem_kernel.dylib 0x9982a71e __open_nocancel + 10
1 libsystem_c.dylib 0x914c643d _gettemp + 554
2 libsystem_c.dylib 0x914c65df mkstemp + 32
3 com.apple.CoreFoundation 0x9685fc06 -[CFXPreferencesPropertyListSourceSynchronizer writePlistToDisk] + 1366
4 com.apple.CoreFoundation 0x968243a3 -[CFXPreferencesPropertyListSourceSynchronizer synchronizeAlreadyFlocked] + 595
5 com.apple.CoreFoundation 0x968240fa -[CFXPreferencesPropertyListSourceSynchronizer synchronize] + 522
6 com.apple.CoreFoundation 0x9686750a __-[CFXPreferencesPropertyListSource synchronizeInBackgroundWithCompletionBlock:]_block_invoke_1 + 122
7 libdispatch.dylib 0x9c809fbd _dispatch_call_block_and_release + 15
8 libdispatch.dylib 0x9c80b943 _dispatch_queue_drain + 224
9 libdispatch.dylib 0x9c80b7e8 _dispatch_queue_invoke + 47
10 libdispatch.dylib 0x9c80aff0 _dispatch_worker_thread2 + 187
11 libsystem_c.dylib 0x91478b24 _pthread_wqthread + 346
12 libsystem_c.dylib 0x9147a6fe start_wqthread + 30
Regards,
Miguel Sim -
I just created my 1st travel expense report - Now what shall I do with the original paper?
Hello,
I just created my first travel expense report. The original paperwork (e.g. from hotels) had been photographed and assigned as expenses. One question: What shall I do with the original papers? Can I throw them away (which I hope). Or is there any legal / tax-related duty to keep them (which would be stupid).
- WolframHi Wolfram,
This community is used by all Cloud for Travel and Expense customers, and each customer's travel policy varies. Please refer to your travel department's policies to confirm what you should do with the paperwork.
Thank you! -
I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number? I'm about to migrate back to PC soon and I'd love to not have to buy the program again since I just bought it. Under my order history though it only shows it for Mac so I wanted to make sure.
ihavea4
The boxed packaging is not sold by Adobe direct. If you want to explore that type of purchase which offers the perk of a Windows and a Mac installation disc, you need to purchase from an authorized reseller who is not going to offer you "upgraded pricing". The seller would be its own entity with its own pricing and own return/refund policy. Sometimes the authorized reseller price may be less than the Adobe"upgraded pricing".
Did you purchase your Premiere Elements 13 Mac from Adobe direct and are within 30 days of purchase? If so, you can contact Adobe Chat Orders to ask for return/refund. And, then you can explore the authorized resellers for pricing and availability of the box packaging. Maybe check out the pricing all around before making any final decisions.
Please review and consider.
Thank you.
ATR -
While updating new software i am getting an error -50 what shall i do
while updating software i am getting message that software cannot be updated because of error -50. what shall i do?
http://support.apple.com/kb/TS3694#error50
-
I am getting a new computer and need to be sure to back things up from the old computer in order to put everything onto the new computer. I know that itunes music I have uploaded from cd's will not sync from ipad to new computer, but what else should I be aware I will lose when I move to sync with the new computer?
IMHO the best solution is to clone your disk. That will give you a copy of everything. You can do that with either SuperDuper or CCC.
Allan -
What shall I do with a very slow running macbook pro with OS X Mavericks
Please help me. my macbok pro is running too slow specially when booting up. It's with OS X Mavericks. How can I restore it with the previous OS? i just upgraded it with Mavericks.
If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm=Process,ruid=User,%cpu | sed 's/ */:/g' | head -6 | awk -F: '{ printf "%-10s\t%s\t%s\n", $1, $2, $3 }'); PR "CPU usage by process"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal. Please note:
☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
☞ When you type your password, you won't see what you're typing.
☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
☞ The commands don't change anything, and merely running them will do neither good nor harm.
☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply
☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
☞ Don't post the contents of the Terminal window.
☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply. -
What shall I do with these datasources
I'm working on infocube 0pp_c03 and the datasources which go with it are 0pp_wccp, 2lis_04_s281, and 2lis_04_p_arbpl and I'm not able to find them in rsa6, and I therefore can't find them in rsa5. So what shall I do inorder for me to install them into bw...
Thanks,
CalvinJust a thought here > Apple Recycling Program
-
When I get a new iPhone, can I restore it with my backup files from my previous phone?
My iPhone was stolen and I'm wondering if when I get a new iphone, if I can update my new phone with my backup files stored on my mac in itunes somehow?
thank youYes. Follow these directions:
http://support.apple.com/kb/ht2109 -
What does the iCloud with a phone number beside it mean when I pull my screen up on safari?
when I press the + button on the bottom of screen on safari, I see a little iCloud with a phone number beside it that is not mine. what does this mean?
sorry, not the + but the double square one that brings up the +
-
My daughter has a iPhone five under my account how can I get her messages to come to my iPad? Under my number?
This can happen when you both share the same Apple ID for iMessage. You can continue to share the same ID for purchasing from the iTunes and App stores, but you should use separate IDs for iMessage and FaceTime.
To fix this, on one of the phones, to go Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a separate ID. Then do the same thing in Settings>FaceTime. -
What shall I do with my set up and new HD?
I just bought a new 250GB USB 7200RPM HD....finally!
I have often gotten the "HD too slow" error with Logic Express.
Should I just move the entire OS and all Logic Express software and components over to the new drive?
Use Logic Express on the new HD only?
Is there some sort of Raid set up I can use?
I am also a little concerned about the USB bus since I will have my Tascam US428, keyboard, etc. on the same.
What is the best way to handle this....please tell me your experiences and resolutions.
I am running L.E. 7.1.1
Thanks
Mini 1.42 Mac OS X (10.3.9) 1 gb ramHi Madison,
OOPS... you might have searched the forum before buying that USB hard drive.
Most audio recording is done best witha FireWire hard drive.This is because the USB protocol is not as fast as the FireWire protocol,in the real world.
And it looks as if you also have already too much going on in the USB department anyways.
Please do NOT move your applications and system to the USB drive,that would not work at all.
The best would be to get a FireWire drive.Or hopefully you bought a hard drive that has both FireWire and USB connections.
Cheers,
noeqplease
Maybe you are looking for
-
After turning on my macbook pro for only the second time it will not start up properly. It will only display the loading screen with the apple logo and the loading wheel icon. After i bought it i installed Microsoft office and t-mobile mobile broadba
-
My wife and I have Ipods but I cant get her music to play on itunes?
please help
-
HT1918 I'm trying to buy an app, but it keeps telling me to contact iTunes support?
Help please! I need to figure this out.
-
Creating large DVD onto USB memory to be played back on a smart TV
I want to create a 20 gig. movie in Premiere Elements 13 that uses movie themes so I can choose sections from a main menu and store it on a USB memory stick that will be played back on a smart TV. Is this possible?
-
hi, I want to value my RM at purchase cost. There are 2 purchases for same material for Rs. 10, Rs. 15 for quantity 1000, 1100. When we issue the same for consumption against process order as follows from 1st lot 1000 2nd lot 750 then at what