I locked a remote screen and now it's locked for ever!
Hi,
I have ML and I did Curtain another computer (Lion) with Remote Desktop 3.6. I don't know what happened in the middle of my working after I took control it disconnected. Now I'm trying to Control or do anything to make it to the normal but it's not working! It goes forever to connect and there is no response.
The remote computer is locked and I did a restart by holding power button but the screen still locked.
What should I do?
It was a MAC Pro and all I was doing was holding power button. I unplug a power and it worked. It was bad that I haven't seen this post though I searched a lot! But this might work too just in case:
varjak paw The old house on the hill
This solved my questionApple Remote Desktop - remote server says it's locked by me! How to get in?
Jan 13, 2011 11:27 PM (in response to geerm)
geermc4 wrote:
Is there a settings file where it will say it's locked and then maybe to a -HUP on the ARD process?
Not that I know of. You could try a restart of the ARD agent:
/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart -restart -agent
and see if that helps (you may need to try killing the screenlock process again afterwards). If not, force-restarting the server may be your only option.
Regards.
Similar Messages
-
I took pictures on my iphone when it was on the lock screen and now I can't view the pictures in all of my photos. How do I view them?
If you go to the Photos app, is there content in the Photo Library? These would be pictures that are synced to the phone from the computer. Photos in the camera roll are those that you take with the phone, or save from email, MMS on the phone. What type of pictures are you trying to get rid of? If you are trying to get rid of the synced photos, you need to connect to iTunes, select the iPhone in the device pane, then go to the Photo tab in iTunes and remove the check mark by sync.
-
My macbook pro was recently returned to me after having been lost. When I turned it on and connected to the internet at home, the activation lock activated. I put my password in and the macbook went to a white apple screen and now won't do anything else. How do I get it running again?
Take it to an Apple Store. Take proof of purchase with you.
-
I downloaded the latest Firefox. In trying to learn some of the new features, I hit the Full Screen option. It went to full screen and now I do not have access to the functions I need. I can't do anything! I need to find out how to undo my mistake or I will not be able to use firefox at all. I can't even get to the portion where I can go to my gmail.
Have you tried pressing the F11 key on your keyboard? It toggles Fullscreen mode.
-
A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHeroIf you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else ) -
I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?
Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you... -
I just updated my iPhone 4s to IOS 7 and now all my icons for apps I had previously downloaded B4 the upgrade dont show on my home screen,does anyone know what happen and how I can get the icons back on my screen??
Apps are in iTunes, are not part of the backup and when you updated the phone, you need to sync that content back.
-
i upgraded new software onto my iphone 4 however it stopped syncing and said error so when i tried to access my phone the itunes USB was showing in my phone screen and now i cannot access my phone
When it stopped and said error, what was the error? You are saying that you disconnected the phone from the computer and all you see is the USB showing on the phone? Then you need to reconnect to the computer and restore the phone.
-
I drug my safari icon off the bottom of the screen and now it is nowhere to be found on my ibook. When I search anywhere for it, it is not there. What do I do?!?!
Click on the Applications folder in the Finder's sidebar and drag it back.
(64066) -
Trying to get my toshiba laptop to turn on so I hit "0" on the toshiba screen and now
i am trying to get my toshiba laptop to turn on so I hit "0" on the toshiba screen and now it says this on the screen......what do I do next?
"hard drives: 1, int13,: F000607D, int15: FE590033
get_diskinfo(80), int13/41(80),version=AA300005, int13/08(80),version=0, C/H/S=1023/255/63, int13/02(80),err=0,
Warning: MBR cylanders(1024) is not equal to BIOS one (1023)
Warning: MBR total sectors (16450560) is greater than the BIOS one(16434495).
Some buggy BIOSes could hang when you access sectors exceeding the BIOS limit.
LBA, C/H/S=1024/255/63, sector Count/Size=16450560/512
boot drive=80, int13/4B01(80),err=1,drive=80, Not CD
get_cdinfo(7f), int13/4B01(7f),err=1,drive=7f, cdrom_drive == FFFFFFFF."If you backed up the iPhone to either iTunes or the iCloud, restore the backup. If not, the data is gone.
(126342) -
I bought iMac 27 quad core i7 last June. Last month i have noticed lots of dark patches on the screen and now they are growing more. i bought this from US but now i have moved to Kuwait. How much it cost to replace the screen?
Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck! -
i own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I locked my MacBook from my iPhone with the "find my iPhone" app and now it's asking for a 6 digit passcode
Normally, you d want to connect to computer, iphone had been synced with previously. If computer does not exist you may have to enter phone in recovery mode, just search youtube for iphone recovery.
-
Icloud backup message popped up on screen and now i cant get phone to do anything, whats going on
Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the device restarts, so you will be able to use it -
I reset my IPod touch because there were gray lines don the screen, and now the screen is flickering
I reset my IPod because there were gray lines down the screen, and now the screen is flickering, any ideas?
Try:
- Reset the iOS device. Nothing will be lost (not sure which reset you did)
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
So a lot of my music in iTunes is CDs and recently I was trying to download another CD to it and everything went as normal until I downloaded it to my iPod. So I know that to get everything to match you have to change the names and stuff to get the a
-
Indesign file won't open native CS5 file, gives me "missing plug-in or being used?
I've tried to open both a CS4 and CS5 file from another designer, and it gives me a message "InDesign may not support the file format, a plug-in that supports the file may be missing, or the file may be open in another application." (which it is not)
-
Dear experts, I am executing Canada payroll , when executing payroll I got the error"Business numbers not found check account and registration number configuration I have configured Business numbers in IMG, still i am getting error in KTXDM functi
-
Hi I am wanting to postion text within a Box/block, these are list items that I have used as navigation buttons. I have set the box size and have selected "center" for text positioning, this positions the text in the centre horizontally ok. I would l
-
How to Install Skype - Nokia Asha 311
hi.. Please tell me how to install skype in nokia asha 311. Awaiting your reply Moderator's Note: A more appropriate subject was provided as the post and it's reply were moved to the correct board.