I locked my iphone and forgot the password and i hooked it up to Itunes and it said it couldn't do it because of the password and i called the store and they said they couldn't help. What do i do?

I locked my iphone and forgot the password and i hooked it up to Itunes and it said it couldn't do it because of the password and i called the store and they said they couldn't help. What do i do?

Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Similar Messages

  • I bought my iphone at an apple store in calgary and its a rogers devce, rogers charged me 50$ to unlock my device and now they say they cannot unlock it because it was not purchased at a rogers store and at an apple store. What do I do?

    i bought my iphone at an apple store in calgary and its a rogers devce, rogers charged me 50$ to unlock my device and now they say they cannot unlock it because it was not purchased at a rogers store and at an apple store. What do I do?

    linzarella wrote:
    i bought my iphone at an apple store in calgary and its a rogers devce, rogers charged me 50$ to unlock my device and now they say they cannot unlock it because it was not purchased at a rogers store and at an apple store. What do I do?
    Get your $50 back.

  • HT201210 i have locked my iphone but forgot my passcode. how do i unlock it

    i have locked my iphone but forgot my passcode. how do i unlock it

    Do as the manual says and restore your iphone

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

    Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

    I am looking at an issue with users not getting specific group policies. 
    After searching a number of client computers I found that the following error
    The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
    I can find the folder in the Sysvol folder on all of the domain controllers. 
    The issue with end users seems to be that the proxy settings for internet explorer is not being applied. 
    Potential problems?
    one folder in sysvol entry is empty 
    \\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
    or is this our issue
    The old method of configuring proxy settings  to Internet Explorer 9 has changed?
    https://support2.microsoft.com/kb/2530309?wa=wsignin1.0 
    http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

    Hi all 
    In administering this policy I am a little confused. 
    We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
    I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

  • Cannot synch or d/l new os5 software. Cannot access apple store. I called support and they wouldn't help unless I pay for it. Called apple store and they laughed over the phone

    Very frustrated with Apple. I have removed and re-downloaded itunes software at least a dozen times. When I plug in phone to synch, itunes does come up. Cannot access apple store. Programs stalls in middle and freezes my PC. I cannot download any apps, music or new OS5. Tried calling support, they will not help unless I pay for the help.  Then called the nearest Apple store and they laughed at me over the phone.
    I did notice that quicktime did not download with itunes. Had to download quicktime separately.
    What do I do to get this software to work?

    Very frustrated with Apple. I have removed and re-downloaded itunes software at least a dozen times. When I plug in phone to synch, itunes does come up. Cannot access apple store. Programs stalls in middle and freezes my PC. I cannot download any apps, music or new OS5. Tried calling support, they will not help unless I pay for the help.  Then called the nearest Apple store and they laughed at me over the phone.
    I did notice that quicktime did not download with itunes. Had to download quicktime separately.
    What do I do to get this software to work?

  • Ive had my iphone for a few months and i was in a middle of a text message and it shut off i tried turning it on and all it showed was the apple logo so i tried charging it and nothing changed then i tried hooking it up to itunes and still nothing worked

    i really need help if anybody knows whats wrong or can help me fix this please do

    Unable to Update or Restore..?
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Take your time... Pay particular attention to Steps 3 and 4
    Note:
    Some users have reported as many as 8 or 9 attempts were necessary before success.

  • Bought and installed ringtone from itunes on my iphone 6.  Cannot find it on my pc (win7) under itunes, although it does appear in purchase industry under my account. I am a newbie to Apple and iphones who would appreciate any help.

    Purchased ringtone for iphone 6 fails to show on pc itunes.

    Connect your iPhone to computer iTunes
    Use iTunes menu File > Devices > Transfer Purchases from ....
    to transfer your purchased ringtone to computer iTunes.

  • I just bought an iPad 3 around 6 days ago, today I saw a vertical black line on the screen and I tried resetting my iPad but I couldn't fix it. I took it to many apple sale store and reseller but none of them agreed to fix my iPad, please help me with it!

    I'm currently living in Saudi Arabia but I bought my iPad 3 from Dubai around 6 days ago, my device is still under warranty but none of the apple stores are fixing it over here in Saudi Arabia... Please help me with my situation!

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • When I try to download some pluggins, like some Adobe products, when I'm almost done a window shows up & says it couldn't get done because another program is yet not done downloading, but it isn't so, any ideas to what it might be?

    When I try to install this program (I'm trying to updated it) a window pops up and it written in it "Error 1500. Another installation is in progress. You must complete that installation before continuing this one." I have a Dell Laptop & use Windows 7.

    I would start with this FAQ Entry first, if you have not done so yet: http://forums.adobe.com/thread/792580?tstart=0
    It starts with a checklist for getting PrE set up properly, then moves into tuning up one's system and OS (you have done a lot of that already), and then goes into troubleshooting tips. Note: those tips rather work up quickly in "degree of difficulty," and DO become quite technical, but things like the "Finding Clues" link will give some tools, that might prove useful, like the use of Windows' Event Viewer to track down issues.
    One of the first things to look at would be your video driver. I would go to the video card's/chip's mfgr's. Web site, and check for a later driver. Do not trust Windows, or any utility to tell you if you have the latest driver. If there is not a newer video driver, or it will not install properly on your system, be sure to check with the HP Web site, as HP, Dell, Lenovo, and some other mfgrs. will re-package video drivers to suit their specific setup.
    One troubleshooting technique, that might prove useful (however, those deleted programs bother me a bit here), would be to create a System Restore Point for now (see Windows Help for doing this with your particular OS version). Then, boot to Safe Mode, and choose an older System Restore Point, from when things did work. This might take some trial-and-error, to get back far enough. Test. At the worst, you will only have lost a few minutes, as you have your new System Restore Point for now, to fall back on.
    Good luck,
    Hunt

  • HT1510 is there something wrong with my ipod shuffle 3rd generation because i've almost 2hours charge with my laptop but still lowbat??please help what can i do

    please help me to solve my problem in mg ipod shuffle 3g thanks

    Hi JoyMole07,
    If you are having unusual charging behavior from your iPod Shuffle, you may find the following Troubleshooting Assistant helpful:
    iPod shuffle (3rd generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/shuffle3gen/
    Regards,
    - Brenden

  • I want to create a playlist on an old iPod Nano (I think it's from the second generation), but the computer it was originally linked to via iTunes died years ago.  How can I make a playlist out of existing songs on the iPod?

    Hello there,
    I have an old iPod nano which I think is from the second generation (model number A1199 if that helps) with software at the latest version it can accept, 1.1.3.  I wish to make a playlist out of the songs currently on the iPod, but I can't see any easy way to do that from the iPod itself.  The next logical thought is to do it through iTunes, but the iTunes that was originally synced to the iPod died several years ago now, so I can't access that to make a playlist through (it's a very old iPod).  I do have iTunes currently on this computer, but that's synced with my iPhone and stores different songs which I don't want to be mixed with those from the old iPod (due to the mostly nostalgic nature of the iPod songs).  Is there any way I can either create a new playlist from the iPod itself, or through iTunes without having to sync?  Also note that most of the songs on the old iPod were uploaded to iTunes from CDs and so aren't connected with any iTunes Login.
    Thanks for any help you can give.  Also, I sorta need to create this playlist ASAP so any advice you could give would be much appreciated
    ~Imamadmad

    The old iTunes library was lost with the old PC.  However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
    Your iPod is designed to sync with only one iTunes library at a time.  It will recognize the iTunes library on the new PC as a new library.  If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library.  So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

    After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
    I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
    Or is the version of iTunes (within recent updates) not an issue when restoring a library?
    Using Windows 7.
    Any help please?

    From the top of the page where the scripts live...
    The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
    You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
    Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
    Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
    If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
    tt2

  • Locked my Iphone passcode screen cannot remember passcode HELP!!!!

    Locked my Iphone 5s forgot passcode to screen cannot remember passcode HELP!!!!

    You have to restore your phone.  This link will walk you through the steps.  Always write your passcode down and store in a safe place for future reference.
    iOS: Forgot passcode or device disabled

  • I have an older Ipod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new Ipod Touch and cannot be updated.  Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one?

    I have an older iPod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new iPod Touch and Itunes cannot be updated.  Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one?  It is my understanding that the music cannot be saved onto my new iTunes, b/c I did not have iCloud. I have over 2,000 songs I just cannot part with. PLEASE PLEASE PLEASE help some how!!  THANKS!

    I had the same problem with my iPad, i couldn't get the newer version of itunes because the computer was too old and my iPad couldnt sync with the old itunes. I got a PC from school a few months later so that solved the problem for me. Unfortunately i don't think there would be a program to put your music on your iPod, iTunes should be the only way to transfer files to Apple devices. What operating system are you running and what version of it is it?

Maybe you are looking for