I lose audio when I convert to FLV?

I have an MPEG-1 QuickTime video that plays fine as is with
audio but when I convert it into FLV i lose the audio? In the
export options I dont even get the option to select the audio.
I have encoded to FLV numerous times and have never run into
this problem. Thanks for any help that can be provided.
-79

TVBroadcastTeacher wrote:
IWhenever I compress the files to mpg in any of the 3 non-transport formats, audio is affected.
Transport streams aren't acceptable for their broadcast requirements?
Russ

Similar Messages

HT204368 I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am no

I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
Is is important to note that I am not the only one experiencing this issue:
This is a link to someone using the Motorola H19txt headset experiencing the same issue
https://forums.motorola.com/posts/94ac15ad7c
If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue. I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web. Hopefully they are already aware, but if not, maybe they will see i here.

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another s

I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
My Iphone5 was replaced and having same Problem. Only does this when using bluetooth for talking.

I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
I might try a restore and see if it helps...

How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro. I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done. Need to add Audition to the long list as well I suspect. Fun times!

Lose audio when watching movies

When I first started using ITunes and I downloaded movies they worked fine, I could watch the whole movie no problems. I think it was after perhaps the fourth movie I downloaded suddenly I started having audio issues. I'd get about 20 minutes into the movie and the audio when cut out and then go out all the way. I'd have to shut down itunes and come back about a half an hour later and I'd get another 20 minutes of the movie and then the audio would go out again. I have to do that thru the whole movie. I've done all the suggestions to fix it.....don't use the enhanced audio, reinstall Quicktime ect but nothing seems to be working.
Does anyone have any other suggestions I might be able to try?
Thanks
H.

Same problem with all headphones and earbuds--just checked settings and Volume Limit was already off--starting to think it's a volume system flaw tied to videos and related sound. No problem getting plenty of sound volume for music, only videos.

Lose audio when converting avi to mp4 on quicktime

I've read the discussions on this but can't find a fix so far.
When I try and convert an avi file to mp4 using either quicktime or MPEG Streamclip, I lose the audio. I don't believe I need to download the quicktime mpeg-2 component for mac osx given I have 10.9.1, but perhaps I do (there is debate on this and I'm confused)?
I tried downloading MPEG Streamclip 1.9.3b8 but it seems to want that component to attach itself. Should I therefore buy it - will it work?
Alternatively, should I buy quicktime 7 pro? I really don't want to.
Can somebody help...please?

So I made a successful and audio distortion free ACC/AAC mpeg4 (.MP4) video from Sony Vegas for the Ziio. You are given a choice of audio (I chose 92kbps). The problem is solved. No more distortions. And all this time I was doing twice the work by importing the MPEG- files into Any Video Recorder and converting to .MP4. That was the distortion result. Hope this helps if you're doing the same kind of work by combining video and audio. Otherwise, it's up to you...
Mag

Slideshow Elements 9: Lose audio when creating a .pdf file from the slideshow

I created the slideshow in Elements 9. Works great. Created the .pdf and I lose the audio. I'm trying to send the slideshow via email so it can't be too huge, so I didn't consider the .wmv. In troubleshooting it mentioned removing the artwork as one potential issue and didn't get into detail as to the other problems could be. So I removed the artwork in Itunes from the .mp3. I converted from .mp3 to .wav to see if that made a difference. Neither helped. I was able to create the .pdf of a slideshow with audio in Elements 7. What do I do to make it work?
Trying to get this figured out to send the slideshow for Christmas so any help/suggestions are appreciated...13 days to go

Sorry for the late reply. Have you been able to send the file?
However, i created a slideshow with a mp3 file and when i output the same into pdf format, it just played fine with the music i applied while creating.
Can you mention the number and size of the files that you used to create the slideshow.
Just to add, you can also create online albums with various templates like christmas and many more and can share them with friends.

Sometimes lose audio when changing modes SB X-FI Titanium HD

When I change between game and entertainment, sometimes I lose all audio until I reboot. I have a SB X-FI Titaium HD and use DTS encoding. Also for some reason any time I reboot or change modes my receiver goes into "stereo" mode, and I have to manually change it back to DTS. Normally stereo signals show up as Pro Logic mode, and normally it detects DTS/DD and changes by itself. Any Idea why I'm losing sound, or what is kicking my Onkyo receiver into STEREO mode? I still hear the DTS, just only on left and right, downmixed. Once I manually change to DTS it works fine. Had this receiver for 7 years or so, and the only time I have ever seen it just say STEREO before is if I push the "stereo" button.
I'm on Windows 7 64-bit, nvidia GTX 570, nvidia 780i w/ Core 2 Duo

devilyang01 wrote:
In fact, whenever the sound loss occurs, if i try to so much adjust any sound related stuffs i.e. changing speaker settings, muting or adjusting volumes (sometimes), my pc locks up. If i'm quick enough to shut the pc down before a lock up, the pc gets stuck at the shut down screen.
Same problem + BSOD, when i try adjust any sound related settings.
I tried to use the contact form with the main site, but "send" button does not work.
Where does this problem come from?. A year ago everything was fine, it began on the rise since the end of summer. And do not use latest nvidia 285.62 drivers with latest x-fi drivers, If you had previously lost sound, with them even worse(video drivers works fine, but the sound drivers?, well, you know), the sound began to disappear almost every hour, use the older 275.xx series and below.

Losing audio when i convert movies in Itunes

Allright so here is how its going down. I download a video off Limewire or MP3 Rocket then i put it into itunes and its running fine with audio then when i click the convert button it takes about 3-5 hours and then there is no audio! Someone please help

are the source files for those videos "muxed"? to check, see:
iPod plays video but not audio of some exported files

How to correct NO AUDIO when I convert .wmv in iVI converter then download to Final Cut Pro?

How do I correct NO AUDIO in my Final Cut Pro event after converting a .wmv file using iVI converter?

Suggest you contact the converter's developer.
Generally speaking, Flip4Mac is considered the gold standard for converting WMV to something that is Mac-friendly,
Russ

Video loses audio when using transitions

On my band's website, I frequently post videos of us rehearsing or playing at a show. Before I upload the videos, I bring them into iMovie, add a simple fade in and fade out to the beginning and end, and then save them compressed so that they download faster. I've never had a problem with this before.
Today, I tried to work on some new clips. For some reason, the fade ins and fade outs are fading the video correctly, but not the audio. Instead, the audio simply drops out during the length of the transition; it then jumps back in at 100% when the transition is complete.
I turned on "show clip volume levels" in the timeline and the volume on the transition is shown to be fading in gradually, starting at 0% and ending at 100% right before the main clip. That's correct, and that's how it's always looked in the past, except now when I play it back, the actual volume stays at 0% during the transition.
I've tried everything I could think of to fix this, with no luck. I tried importing the video separately instead of pulling it out of my iPhoto library, changing the length of the transition, using a different video file, using different transitions, etc. Nothing works. Furthermore, the problem sticks when I export the video to QuickTime, so it's not an issue just with previewing the video in iMovie. It's also persisted even after quitting and relaunching iMovie, and rebooting the computer entirely.
The only way I've been able to get around it is by selecting the video, extracting the audio, and then manually fading the audio in/out so that it matches the length of the video fade in/out. While this works, it's more work, takes more time, isn't as precise since I have to manually do it, and is totally unnecessary! The transitions are supposed to automatically apply to both the video AND its audio!
Any ideas? Please help - I have a iMovie project due on Monday and I will need to use these effects!

Hi daGUY:
The only way I've been able to get around it is by selecting the video, extracting the audio, and then manually fading the audio in/out so that it matches the length of the video fade in/out. While this works, it's more work, takes more time, isn't as precise since I have to manually do it, and is totally unnecessary! The transitions are supposed to automatically apply to both the video AND its audio!
That's the right thing to do in this case (as you found out). But, it may be that this is a one time problem and the next video will work fine...
Sue

.mpg files lose audio when imported to FCP

Has anyone lost only the audio tracks of a clip with an .mpg extention after importing to FCP? The audio plays in Quicktime, but FCP will not recognize it, nor will Soundtrack Pro. I'm at a loss here.

mpg files are muxed (mixed audio and video). FCP wants separate threads for audio and video.
Convert the files using Mpeg Streamclip (google it, it's free) to convert the files to an editable format - say DV-NTSC quicktime.
x

QuickTime Editing Basic - Loses Audio when Video is Edited

I only have the basic quicktime version and I only want to do basic editing. When I trim or split a clip, the audio input from the computer mic gets lost. Thoughts? Help?

I only have the basic quicktime version
the basic version ( QT player ) does not edit, you need to buy QuickTime Pro from here:
QuickTime Pro
If you mean QT X read the help files on trimming clips it explains it well

Lose audio when burning to disc image.

Hey guys. I am losing my audio half way through my project when I play it on a dvd. My audio is there after I export to quicktime, but when I create the disc image through iDVD and burn through Roxio toast my audio is only there toward the first part of my project. The video portion is fine though. Any thoughts on this would be great .
Thanks,
D.T.

Burning a disc image and copying it to disc is the recommended workflow around here -- it is one more action that you have to initiate, but it provides greater control (set the burn speed down to 1x or 2x) and it is less demanding on your computer (fewer errors?).
Re the audio -- if the music was purchased from iTunes, you may be caught up in a problem that should have been resolved in iLife06. There's a workaround (burning a CD from iTunes and re-importing) but provide some more details on the audio.
John

Lose audio when clip in timeline

New problem. CS3.
I set the in and out points of the video in the source monitor. When I drag it to the timeline, the audio is not there. I assume I inadvertantly changed the output button. I currently have it set to composite video automatic quality. I have tried the other settings and am sitll not getting the audio into the timeline. I do have the audio in the source monitor.

Aha, I have tripped upon the answer. The problem was not the output button, but rather I had inadvertantly hit the "take video and audio" button. Switched that and magically, all is well. (I also got my husband's birthday cake decorated-this must be my lucky day)!
....I never knew that button was there....

I lose audio when I convert to FLV?

Similar Messages

Maybe you are looking for