I lose my wireless internect connection on my computer everytime I sync

Everytime I sync, I lose my wireless internet connection and have to restart my computer. I don't think I am updating my phone like it should. Any ideas why this is happening?

Well, no not really. Your post is a little ambiguous.
You lose your wifi connection on the PC or the iPhone?
Why are you updating your phone? Do you mean you are just syncing across music etc?
What version of the iPhone Firmware are you using 1.1.4?
Are you using your routers latest firmware?
Are you running the latest service packs/updates for Windows Vista?

Similar Messages

  • For those who constantly lose their wireless internet connection using WRT54G

    Ok I was constantly losing my wireless internet connection on my LAN network when using my laptop, I tried everything to no avail,until today. Heres what I did to solve my problem
    1. Upgrade your firmware for the WRT54G to ver.6
    2. Reset your wireless router
    3. Unplug all cables and wires from your Pc and router
    4. Connect your Pc directly to your cable modem and obtain an internet connection
    5. Now transfer files you want to keep from your laptop onto a usb flash drive or burn them to a disk
    6. Reformat your laptop so that it goes back to all factory settings just like when you bought it
    7. When completely done reformatting run software that came with the WRT54G on your desktop pc and follow all instructions,when prompted to type password type the password you last used
    8. Go to your laptop and it should pickup a LAN,click connect, it will ask for the encryption key so type it in(whatever you typed when re-installing your wireless router)
    Congratulations you are now back up and running,install files saved earlier back on your laptop and enjoy.This is what I did and it solved my problem as a matter of fact i typed this from my laptop and has not dropped my wireless internet connection yet.
    NOTE SAVE ANY AND ALL FILES YOU WANT TO KEEP AS REFORMATTING WILL CAUSE YOU TO LOSE DATA!
    IAM IN NO WAY RESPONSIBLE FOR ANY ERRORS OR PROBLEMS THIS PROCEDURE COULD CAUSE IF DONE INCORRECTLY!

    If you bought a version 5 or 6 return it to where you bought and apply the money towards a WRT54GL v1.x  You'll be much happier.  You could spend time online rather than pulling your hair out trying to figure out whats wrong.  I setup 6 Linux based WRT54G's with no issues before I was given the task of setting up a version 6.  Worked for about an hour.  Told the guy to return it for a GL.  Long story short, set it up in a matter of minutes and he was online.  That was 3 weeks ago and he is very happy.

  • I can't sync my iphone to my computer. when i connect to the computer it says 'sync in progress' and on computer it says 'backing up your iphone' but that goes on forever and nothing happens....what to do?

    I am having trouble syncing my Iphone to the computer. Everytime I connect it....it says 'sync in progress' and on Itunes it says 'backing up in progress' but nothing really happens. It goes on forever...I end up disconnecting......please advise.

    If you ever want to cut down on back up times eject your SIM card before starting...you should see the over all time go down a noticable amount.
    Disclaimer: this does not mean that it will zip like lightning, just move faster than it dies with the card in...
    let me know what you see happen.

  • Why did I lose internect connection on my iphone in North Carolina?

    I was in South Mills/elizabeth City, NC yesterday and I had no internect connection.  I had cell receiption and could make and send calls and text messages but could not access the intrnet.  I want to know why that is.  My carrier is T-Mobile.  Can anyone tell me why that happened?  I appreicate it, thanks!

    it is possible tht the device was not connectedto the data services in that area and therefore you had an issue with the internet. next time it happens,simply do a RESET ALL SETTINGS ...

  • Lost Internect Connection and Poor Performance

    System Setup
    Motorola SB5100 Cable Modem->WRT610->WRT310
    I have tried many configurations to get a consistent performant network with very little success.
    Problems:
    1) My DMA2100 Wireless Media Center cannot get consistent performance on either either wireless band... locate about 25ft from my router.  I've tried many configurations including change encription - Currently using WEP... seemed a little more stable.  If I look at the tuning screen, the proformance has constant spikes and dips and periodically drops out.
    2) I loose internect connection when using selected applications... Bit torrent, Flckr uploads...  When I loose the connection, I loose it to all machines, wired or wireless, and must reset the cable modem to restore my connection... I've tried multiple configurations of the WRT610 without success.  Currently I've disabled the 2.4G Band and I'm using only the 5G Band and have a second WRT310 configured for 2.4G Band.
    I'm fairly PC literate, but not a network guru.  From the traffic, I see lots of threads that indicat problems with WRT610 and DMA2100.  I'm just surprised I cannot get a stable network that performs and allows streaming video to my living room. 
    Any help for the ignorant?

    The quite line test was Quiet. The hub is connected through the BT master socket and one filter . The Home hub 3 has been reset by power off and on.
    This is the line test.
    FAQ
    1. Best Effort Test: -provides background information.
    Download  Speed
    6.66 Mbps
    0 Mbps
    7.15 Mbps Max Achievable Speed
     Download speedachieved during the test was - 6.66 Mbps  For your connection, the acceptable range of speeds is 2 Mbps-7.15 Mbps.  IP Profile for your line is - 7.14 Mbps
    2. Upstream Test: -provides background information.
    Upload Speed
    0.19 Mbps
    0 Mbps
    0.83 Mbps Max Achievable Speed
    Upload speed achieved during the test was - 0.19Mbps  Additional Information:  Upstream Rate IP profile on your line is - 0.83 Mbps
    We were unable to identify any performance problem with your service at this time. It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly. If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    We have identified that you have additional services enabled on you broadband line, please click continue to run advanced service tests.
    These are the router stats:
    ADSL Line Status
    Connection Information
    Line state:
    Connectedppp0_0
    Connection time:
    0 days, 00:35:01
    Downstream:
    7.898 Mbps
    Upstream:
    443.9 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    8.7 dB / 10.5 dB
    Line attenuation (Down/Up):
    30.2 dB / 15.7 dB
    Output power (Down/Up):
    20.7 dBm / 12.5 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    32 / 2
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    66 / 9
    Error Seconds (Local/Remote):
    161 / 2

  • Losing wireless internet connection

    After surfing the internet for a while I lose my wireless connection from my laptop. I have other computers directly connected to the Router that dont lose internet connection ever. Its just my laptop and it drives me crazy. I have to reboot the laptop to connect to the internet again. I have a WRT54GS Router with a WPC54GS pcmcia card. Can anyone help?

    change the channel to 11...
    use your desktop, click this: http://192.168.1.1
    usename: blank, password: admin
    go to wireless tab, change the channel from there to 11
    "a helping hand in a community makes the world a universe"

  • WRT54GS v5.1 auto reboot when wireless device connects

    Hi,
    I'm using the linksys WRT54GS wireless router v5.1
    Current Firmware version v1.50.9, Sep. 14, 2006
    The problem that I have is that everytime a new device connects to the Router wirelessly, the router reboots itself.
    After the reboot, everything seems to be working fine. This becomes quite annoying when it comes to gaming and another family member turns on their laptop and then I get disconnected by the router because they are connecting.
    What I have done upto now is reset the router after doing the FirmWare Version update and the problem still occurs. (The problem was still there even before I had done a FirmWare Update.)
    Is there a way to solve this problem? because I have read about a few other problems just like mine on the forums and they don't seem to have been resolved.
    Or will I have to go back to PCWORLD to see if I can get a refund / replacement?
    Message Edited by chopsticks on 11-11-200611:05 AM
    Message Edited by chopsticks on 11-11-200611:05 AM
    Message Edited by chopsticks on 11-11-200611:08 AM

    I do not see a "keep alive" option. I use the Automatic Configuration - DHCP because I have connected, a CABLE MODEM provided by my cable provider Telewest Blueyonder
    The router just reboots when the wireless laptops connect. The wired desktop (this PC) loses connection as it is rebooting and regains connection after the reboot. Then both PC and Laptop work fine.
    Message Edited by chopsticks on 11-12-200612:03 PM

  • MY HP desktop computer totally loses its wireless ability each day plus its unresponsive

    I have HP model #HPE-150f which 8 gb of memory. In reality this computer should be a beast and be quick as heck. However its the slowest machine I have ever used. I just had it looked at by a computer expert. He scanned and cleaned everything u and didnt see anything wrong with it. First of all it constantly loses its wireless icon. Its weird I can do a search and nowhere can it be found. However usually when I restart the computer it shows up again at the bottom right of the screen.Why would this disappear all the time? Why when it is currently not to be found that when I seach wireless access it only says things about an ethernet cable and absolutely nothing about a wireless card?? Very confusing!
    Second with all the memory in this computer and it being an i7 processor why is this computer so slow? Why does it hang all the time and then freeze? All we use the computer for is surfing the internet and watching tv shows?
    Homestly I ask my daughter why anyone would put up with a lousy machine like this when my 4 year old Apple Imac works so fast and smooth and NEVER have any operting problems??
    Come on HP there must be something wrong with this expensive paperweight!

    jmbeam,
    Seems like a contradiction.
    Can you turn off the system, and remove the power cord?
    I would like you to look inside, and verify the antenna is attached to the card.
    What type of internet do you have? and what speed. Test here
    How many computers actively connected to this system?
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Wireless internet connection problems

    Hi there,I'm from Holland so if my sentences come off weird, you know why... I got aquestion about wireless connections in the big city. I live in a fairly bigcity and my connection is failing at least 10 times a day... My provider toldme this might be because of the fact that i can receive a ton of signals (otherwireless network). Now, i don't buy that so im looking for a solution. Incomparison, i don't believe people in large cities in the US have theseproblems and some of them harbor more citizens than my entire country does...So i wanted to ask: I have this internet package (check out the specs if you will) is there something else that yourproviders offer and by that, overcome the frequency overload... modem differenttype of modems or something like that...? please help! thnx in advance!

    I don't know if this is going to help anyone or not, but I was having a similar issue to many of the users on these discussion boards. My wireless was connecting and then dropping from 5 to 3 bars, then I would lose connection entirely for about a minute, then it would reconnect and work fine for 5 minutes etc. Sometimes, my airport would work great the whole time.
    Anyway, I called applecare support and followed their various suggestions, to no avail. The IT guys at work couldn't figure it out either.
    Fortunately for me, my computer was purchased through an academic institution, so I have onsite hardware and software support. With this being said, the hardware technician at work determined that the wire connecting my airport was lose. Since the airport is located at the bottom of the macbook near the hinge, the technician suggested that opening an closing the screen would affect how well the airport was connected given the lose wire.
    With the lose wire problem taken care of, I don't seem to have these problems anymore. Also, before the problem was fixed I needed to be within about 20 feet of my router to get a good signal, and now I can pretty much go anywhere in my house and it works great.
    Something to look into.

  • Wireless Internet connectivity lost after sleep

    I've got a problem where I keep losing my wireless network connection after going to sleep.
    The situation is that I'm connecting to my university's secure network. I have the credentials saved on my MacBook. When I need to go and leave my computer on my desk, I go back to the login window, and close the lid. When I come back and open it again, I'm instantly asked for the network password, at the login screen. Regardless of whether I enter it or dismiss the dialog, I'm unable to get a connection automatically after I resume my user session. There's an exclamation mark on the network icon and it says that there's no internet connection on the menu. When I click on this warning, I'm asked to repair the network connection and re-connect to it. This works, but I'd much rather that this be done automatically. Is there no way for me to resume connectivity after waking up my MacBook without having to manually re-connect?
    Thanks in advance for any suggestions.

    The problem's still happening in 10.6.2. I lose my Internet connection when I go back to the login window, then close the lid on my MacBook so that it goes to sleep. When I awake it, and log back in, I'm shown as being connected to the network, but not to the Internet. I have to manually re-connect.
    When I just close the lid without exiting to the login window, it appears that my Internet connection is re-established automatically, though, on re-awakening. I'm puzzled as to why this is occurring. It looks like a bug to me.

  • TS4456 New Mac mini and older wireless keyboard connect, but don't pair

    In setting up my brand new Mac mini, the wireless mouse paired with no problem, but I'm having trouble with the keyboard. I am using an older mouse and keyboard from my previous mini, which is completely shut down. The keyboard shows as being connected to the computer, but when I enter the code and press Return, the code disappears and nothing else happens. After a while the code reappears and I repeat the process with the same results. After several attempts, nothing else happens. I've tried rebooting twice, checked the keyboard batteries, made sure the keyboard light is blinking to show it's discoverable, but I can't move past this screen. I don't know what else to try. Please help!

    Hi, it isn't paired to another device is it?
    Might see this...
    http://www.christopher-parsons.com/blog/technology/solved-bluetooth-devices-not- connecting-to-osx/

  • Home wireless network connections

    I have embarq high speed DSL. I have the DSL modem and a linksys router that creates a wireless network in my homw. I have had this set up for a few years. I have the router connected to a computer that we never use. My question is ---do I have to continue to have the router connected to the computer or can I unhook the router from th computer and still be able to have my wireless network function properly there is no wired connection to a computer.

    There is no need of any computer to stay connected to your router(hard wired), you can disconnect the computer from the wireless router and your wireless network will function properly...

  • Solved. Travel router WTR54GS sharing one wireless hotspot connection with multiple devices

    Hi, Passing on info I've learned.
    The manual for the WTR54GS mentions being able to "...use multiple devices on a single hotspot account in a coffee shop or airport lounge...". See my original posting, "How to set up a wireless private bubble at paid hotspot? WTR54GS?", which ended in a dead end. I subsequently had a Linksys live chat session and the representative provided the solution. Perhaps worthy to be included in the Wireless FAQ?
    Situation: you have access to a paid hotspot (hotel room, meeting room, etc.) and you want to share the connection with several devices, also wirelessly.
    Solution: the WTR54GS can accept an incoming Internet connection wirelessely and re-broadcast that connection to form your own private bubble or network. (Note the WTR54GS can also accept an incoming Internet connection via Ethernet cable).
    Linksys Live Chat pointed me to these web pages.
    Go to the Linksys Easy Answers page: For a schematic of the concept of "associating the travel router to a hotspot (wirelessly)" search for Easy Answer ID# 4831
    URL for above is http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4831&p_created=1167963305&p_sid=GmLnq3Zi&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NjImcF9wcm9kcz0wJnBfY2F0cz0xNzIxLDE3MjMmcF9wdj0mcF9jdj0yLjE3MjMmcF9zY2ZfbGFuZz0xJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9V1RSNTRHUw**&p_li=&p_topview=1
    There is a "configuration simulator" that shows the options for selecting a wired or wireless incoming Internet Type.
    http://linksys.com/ui/files/WTR54GS/1.0_15/Setup-Wireless.htm
    The hotspot has to be "open", that is transmitting an SSID and with no WEP or WPA key. It may have a log-in page accessible via a web browser, this is okay as this will be passed onto the connected device.
    My personal application is to be able to connect a PDA that has a 801.2b wifi to a 801.2g wireless network. I haven't tried it but if this works, it will extend the useful life of my PDA in a "g" environment. Will report back once I find a "g" only environment. Comments?
    -Tony
    Dang, the long URL is making for a really wide message. Is there a fix?
    Message Edited by tony_vancouver on 02-28-2008 02:08 PM
    Message Edited by tony_vancouver on 02-28-2008 02:12 PM

    There are two conditions which must be met in order to use your WTR54GS to "extend" an incoming, wireless internet connection:
    The incoming connection must be unsecured.  You have already covered this point;
    The security settings on your WTR54GS can only be set to "WEP," or to "Disabled."  If you choose "WEP," then you can use either a 40/64-bit, or a 128-bit key.
    If those two conditions have been met, then it works fine -- says the guy who is sharing one paid internet conneciton in his hotel amongst three devices, and with co-workers in nearby rooms.  

  • WRT54GS WIreless not connected, yet connected

    My WRT54GS wireless connections wont go through, as it clearly says, Not Connected, yet my network connections will show that I am connected to the internet and indeed, I can browse the web. My biggest problem with this is that eventually (around 10 minutes or so) it will disconnect from the internet, which is a problem since i play online games. Anyone ever had this happen?

    under the network connections , what all connections do you see....ensure that any other connection except for the wireless network connection is disabled..
    the only medium of connection should be the wireless network connection... check this and let me know if more help need on this issue ...

  • ? possible to connect AEBS to existing wireless internet connection

    Hi
    I have a cable connection to a Netgear W614 wireless router and can connect to the internet wirelessly using my MBP.
    What I would like to do is have an airport extreme in a separate room with a printer connected to it connected to the same wireless network. What I hope to do is be able to connect wirelessly to the internet through my Netgear ( as I have been doing) but have wireless access to the printer connected to the AEBS.
    I seem to be able to see how to "set this up" if the AEBS is hardwire connected to the netgear ( and thus the internet) but this defeats the purpose for me as I want to have the Netgear and the AEBS in separate rooms. I cant seem to see how to get the AEBS to wirelessly connect to the network and share the printer and yet retain internet connection through the Netgear.
    Is this setup possible e.g MBP connected to a wireless network which has a Netgear wireless router connected to the internet and a AEBS connected to a printer in diffrerent rooms?
    Cheers

    Hello RichwhG. Welcome to the Apple Discussions!
    To connect the AEBS to the Belkin, wirelessly, in order to extend the Belkin's wireless network, you would have to establish a Wireless Distribution System (WDS) between the two.
    Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of WDS...so it very unlikely that your router can be extended wirelessly with the AEBS.
    The few that are known to work are:
    o Linksys WRT54G or WRT54GS (not v5)
    o Belkin F5D7230-4 and F5D7231
    o BT Voyager 2091
    o Netgear WGR614 v6
    o Buffalo WGR-G54
    The other option is to configure the AEBS as it's own wireless network to share the printer, but you would then have to switch wireless networks between Internet access or for printing.

Maybe you are looking for