I lost all of my artist names and album names for my iTunes library. They are all now on one album. How can I get the album and artist names back?

I lost all of my artist names and album names for my iTunes library. They are all now on one album. How can I get the album and artist names back?

I have a script called ExportImport for this task, but it only runs in Windows.
In principle something similar should be possible in AppleScript, but I don't currently have access to a Mac to write it myself.
tt2

Similar Messages

  • I lost all my events on iphone prior to 2015 and this is not nice as I often need to look back on past dates they are on my Macbook air but how can I get them back to my phone

    I lost all my events on iphone prior to 2015 and this is not nice as I often need to look back on past dates they are on my Macbook air but how can I get them back to my phone

    They're not lost, they simply don't show because you settings ask it not to.
    Go to Settings --> Mail, Contacts, Calendar --> Calendar --> Sync --> All events

  • How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

    How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?  I would like them to open at the size they were previously resized like they used to in previous operating systems.  They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it.  Any help would be appreciated.

    hi Prasanth,
    select werks matnr from ZVSCHDRUN into table it_plant.
    sort it_plant by matnr werks.
    select
            vbeln
            posnr
            matnr
            werks
            erdat
            kbmeng
            vrkme
            from vbap
            into table it_vbap
            for all entries in it_plant
            where matnr = it_plant-matnr and
                  werks = it_plant-werks.
    and again i have to write one more select query for vbup.
    am i right?

  • I recently synced my iphone 5s to itunes. It erased my photos and I can not locate them on itunes. They are nowhere to be found. How can I restore them back to my phone?

    I recently synced my iphone 5s to itunes. It erased my photos and I can not locate them on itunes. They are nowhere to be found. How can I restore them back to my phone?

    Restore them from where?
    The pic sync is one way - computer to iPhone.
    You should be storing all of your photos on your computer.  Jut sync them to your iPhone.

  • How can I get the old view of iCal back on my MacBook Pro and iPhone?

    How can I get the old view of iCal back on my MacBook Pro and iPhone?  The Mavrick version is crisp and clean but a colored dot is not the same as a highlighted word. I rely on my iCal on my MacBook Pro and iPhone 5 to help me track which of the 8 sites I visit for my job during the week - the color coding is (was key) to organizing and tracking meetings.  I hate the upgrade! 

    If purchased through the Mac App Store then it can be installed on up to five authorized CPUs. Otherwise, it's controlled by the license that came with the software.
    To install on another computer copy the downloaded installer application to the other computer.

  • How can i get the time and result together show in one Array or in Cluster?

    hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
    I post the time and voltge NOT together photo
    Attachments:
    12345.GIF ‏54 KB

    You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
    Message Edited by smercurio_fc on 10-17-2007 03:15 PM
    Attachments:
    pic.PNG ‏11 KB

  • I won Lightroom 1.0 a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    I won Lightroom 1.0 as a door prize a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    Thanks for replying, Jim. I wasn't planning to use it for raw images. I shoot film, black and white, and have many negatives I want to print. I am unfamiliar with the upgrades in Lightroom. I wasn't unhappy with the version I have. It was useful for my purposes.
    Because it was a few years ago, I don't remember if I registered the product. I was able to login to my account. But could not find a path to communicate with Adobe. I will keep trying.
    Ken

  • How can I get the date and time and display it on the report main page?

    Gurus,
    How can I get the date and time and display it on the report main page?
    Thanks!

    Hello,
    You can create a Formula Colum returning a date :
    function CF_1Formula return Date is
    begin
    RETURN(SYSDATE);
    end;
    Put a Field in the Layout having this formula column as source .
    Regards

  • My iphone was stolen and called police. Now the ditective needs to know my IMEI number. I need to know the number of the stolen one. How can I get the IMEI number?

    My iphone was stolen and called police. Now the ditective needs to know my IMEI number.I need to know the number of the stolen one. How can I get the IMEI number?                   

    Quickest place to look is in the label attached to the box the phone came in.
    Not around anymore? Maybe the carrier you used the phone with can facilitate the information. Also, when under contract, the IMEI is listed in the paperwork. Apple, alas, is quite unhelpful with that information.

  • How can i get the driver and software for q1342a laser printer 1000

    How can i get a driver and software Cd for HP Laserjet 1000 S/N#CNBJ242828
    Product ID# Q1342A

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • How can I get the X and Y coordinates of an object in Xcode, ApplescriptObjc?

    How can I get the value of a specified object's X and Y coordinates in Xcode, using ApplescriptObjc? I'm hoping for something like:
    myObject's currentPosition()
    // Which would return {150, 100} for the X and Y of that object.

    Actually this is straight from basic physics
    Assuming that the x and y values you get using that AppleScript/Objective-C code is accurate, to move the object you would do
    set x to x + dx * speed
    set y to y + dx * speed
    with dx and dy being an integer with a value of -1 or 1 which indicates the direction the object is moving. Remember the origin in OS X is the middle of the frame or screen with positive x and y values moving to the upper right quadrant, and negative x and y values moving to the lower left. Your basic Cartesian coordinate system. Speed is also an interger and models the speed of the object.
    Once you've set x and y to their new values you would write  them back to the object.
    This is so I can find how much distance (in pixels) is being travelled when I animate an object to move from one position to another, to apply it to my desired velocity (of pixels per second), to find out how long the object should take to move.
    This part has got me stumped.
    To make an object move you need to change its x and y coordinates. To get smooth animation you need to change them on a regular schedule at a rate fast enough to avoid jerky motion. Given the refresh rate of most monitors and other factors a rate of 60 times per second gives good results. Between each tick of the clock you change the x and y coordinates by some amount, the size of the amount will model speed. Add a small change and the object moves slowly, add a big amount and the object moves quickly. Keep the amount of change constant and the object will move at a constant speed. Increase (or decrease) the amount of change between each tick and the object will accelerate (or decelerate)

  • I sync'd my Iphone with itunes and all my data on my Iphone was erased.  How can I get the data from my Iphone back?

    I am a previous user of itouch and sync'd it with itunes on my PC using windows 7, itunes v10.  Bought my first iphone and started using it: I entered contacts, photos, apps, etc.. I sync it for the first time and itunes removed all my data from my Iphone and put my old data from Itouch on the iphone.  How can I get my Iphone data back?

    I am a previous user of itouch and sync'd it with itunes on my PC using windows 7, itunes v10.  Bought my first iphone and started using it: I entered contacts, photos, apps, etc.. I sync it for the first time and itunes removed all my data from my Iphone and put my old data from Itouch on the iphone.  How can I get my Iphone data back?

  • Hello, i have a Problem. My iTunes wasn't work, so all my Apps and music is away. How can I get the apps and so on back?

    i destroy my iTunes and all my data's are away. how can i get back?

    Hello. . .
    All of the iTunes content are in a folder. . .
    For Windows: [Windows HDD]\Users\[Your Username]\Music\iTunes\iTunes Media
    For Mac OS X: Music\iTunes\iTunes Media
    If they are not there, then there is absolutely no way to recover them.

  • How can I get the start and end of a date range?

    Post Author: RobR
    CA Forum: Formula
    Greetings!
    I have a report whose records are selected if a date field is within the date range returned by the LastFullWeek function.  I want the header for that report to print the first and last dates in that range.  I don't see a way to extract those dates from a date range.  How do I do it?
    Also, I think it would be nice to be able to walk through a date range using a for loop, something along the lines of the following:
    for (thisDate in LastFullWeed)(    do something;)
    but I didn't see syntax like that in the help system.  If I could do this, then I could get the first and last date.  Is this possible?
    Thank you!
    RobR

    Post Author: SKodidine
    CA Forum: Formula
    If all you want is the starting date and ending date of the function LastFullWeek, then all you have to do is this:
    minimum(LastFullWeek) & '          ' & maximum(LastFullWeek);
    On a side note, from your post: for (thisDate in LastFullWeed)  Whatcha smokin'  Willis?? 

  • How can I get the peak and valley of a MZI signal

    I am using MZI signal which is similar to sine wave with frequency of 10MHz to calibrate an interference signal. I want to get the peak and valley of the MZI signal and get the corresponding value of interference signal at the same location. The problem is that the MZI signal aquired by DAQ is not smooth, Please see attached filter.PNG, the top left is the MZI, top right is the MZI Zoomed in, you can see that there may be two values that are approximately same to each other. I used a peak detector to detect both the peak and valley and a build array to concatenate them. I am worried that the peak detector may find two peaks or two valleys in a fringe. So I used the filter function in express to bandpass the MZI signal (cutoff frequency is 8MHZ~12MHZ) to smooth the signal, the result zoomed in is  the bottom graph in filter.PNG. But I found that it did not solve the problem but cause phase shift. Is there somebody can give some help?
    Attachments:
    filter.PNG ‏143 KB
    peak detector.PNG ‏69 KB

    I don't know anything about MZI signals, but I do know sine waves.  If this is a sine wave, it is relatively easy to measure its amplitude as long as you know the frequency.  Since you say it is 10 MHz, you appear to know the frequency.  You can use Fourier analysis to determine the magnitude and phase of your signal, as long is it is a steady signal that doesn't change frequency or amplitude.
    Generate a sine and cosine wave using the same frequency.  Divide each wave by the sum of its points.  Multiply each one by your incoming signal and sum all the values, one sum for sine and one sum for cosine.  The sums should be the coefficients of the sine and cosine components of your unknown signal.  The ratio tells you the phase of the signal.  If you multiply the sine and cosine waves by their coefficients and add them together, you should be very close to your incoming signal.  The amplitude of your signal is equal to square root of A*A+B*B, where A and B are your coefficients.
    I may be off by a constant factor here somewhere (probably pi), since I didn't write down the equations and verify them.  These equations are the basis of the Fourier series, though, so they would be fairly easy to find.
    Another option would be resampling.  If you upsampled the data and increased the data resolution by a factor of 10 or so and filtered the results using an FIR filter, you would have a much cleaner signal with a lot more detail.  You wouldn't have any problem locating and measuring peaks and valleys.  This would probably work better with your data, since it looks like it doesn't have a constant magnitude.  To upsample the data, just add 9 zeroes between each data point.  Create a lowpass FIR filter that is based on 10 times the original sampling frequency and has an amplitude of 10.  The cutoff frequency should be half the original sampling rate.  Filter your new data and you should get the same waveform with 10 times the resolution.
    Bruce
    Message Edited by Bruce Ammons on 10-02-2008 09:10 PM
    Bruce Ammons
    Ammons Engineering

Maybe you are looking for