I lost my galaxy s4 and didn't had an insurance. And the phone is in contract. What's the best next option?

@

vatz143,  Losing your phone is never a fun time! That happened to me recently so I totally understand how you feel.   If you did not have insurance we can review your account and see what other options you have available. Please send me a direct message so I can review your account and further assist. To avois unauthorized usage on your phone, I suggest suspending the line until you have replaced the device.  JohnB_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

  • I D/L'd a trial version of LR 5 and lost all my catalog and collections in LR 4. What can I do to get them back?

    Yesterday I D/L'd a trial version of LR 5.6 and during installation it seemed to be copying my catalog from my LR 4.4.  Now nearly all of my catalog and all my collections in LR 4 have disappeared.  What has happened to them andhow do I get them back.  The original photos seem to still be available in the myphotos directory on the computer, but without any of my lightroom editing.

    Thank you so much!  I was freaking out that I had lost the whole
    catalog and all my collections.  It would have been good if Adobe
    support had been able to point me in the right direction with this
    advice. They basically shrugged their shoulders and said tough
    luck!  I am not impressed!
    Thanks again, Anne
    >I D/L'd a trial version of LR 5 and lost all my catalog and
    >collections in LR 4. What can I do to get them back?
    >
    >created by <https://forums.adobe.com/people/dj_paige>dj_paige in
    >Photoshop Lightroom -
    ><https://forums.adobe.com/message/6778009#6778009>View the full discussion
    >

  • I lost my admin password and the installation discs. How can I reset my admin password ?

    I lost my admin password and the installation discs. How can I reset my admin password ?

    OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
    Reset Password
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box under “Select user account”.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • Help I lost my ipod 5 and the internet is off and i downloaded the app find my iphone on me moms iphone 4s

    Help I Lost my iPod 5 and the internet is cut off and i downloaded the app find my iphone

    Thank You That Is What I Am Doing I Lost It At My House Yesterday And We Cleaned The House And Looked But Nothing Maybe It Will Turn Up

  • I Had Lost My Apple ID And The Password

    I Had Lost My Apple ID And The Password, Then I Found It Today. But I Can't Activate My Iphone. There Is An E-mail Adress Like A ([email protected]). Does My ID Begins With The Letter "L" Or It Doesn't Depends On It ???

    That shows you are not the original owner, you need the help from the original owner.
    Apple cannot help you with Activation Lock, it prevents thief from re-using iPhone.

  • I lost my iPhone 5 and my phone was off. I cant use find my iphone

    I lost my iPhone 5 and my phone was off. I cant use find my iphone and icloud it say it was offline.

    Then, other than physically looking for it, there's no way to locate it now.

  • JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers.  What am I doing that has these settings appear?

    JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers.  What am I doing that has these settings appear?

    16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off).  Have you previously been saving PSD files?
    IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on.  The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list.  So long as the file does not have parameters that your chosen format does not support, then this should work for you.
    [EDIT]  Just noticed that you did include 'Crop' in the subject line.  Do you have 'Delete cropped pixels' checked?

  • Help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

    help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
    7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/Audio
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    14. Reinstall OS X after backing up all data.
    15. Make a "Genius" appointment at an Apple Store.

  • I am moving from PC to Mac.  My PC has two internal drives and I have a 3Tb external.  What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

    I am moving from PC to Mac.  My PC has two internal drives and I have a 3Tb external.  What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

    Paragon even has non-destriuctive conversion utility if you do want to change drive.
    Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
    www.paragon-software.com
    Some general Apple Help www.apple.com/support/
    Also,
    Mac OS X Help
    http://www.apple.com/support/macbasics/
    Isolating Issues in Mac OS
    http://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/
    https://www.apple.com/support/quickassist/
    http://www.apple.com/support/mac101/help/
    http://www.apple.com/support/mac101/tour/
    Get Help with your Product
    http://docs.info.apple.com/article.html?artnum=304725
    Apple Mac App Store
    https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
    How to Buy Mac OS X Mountain Lion/Lion
    http://www.apple.com/osx/how-to-upgrade/
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    http://www.apple.com/support/timemachine
    Mac OS X Community
    https://discussions.apple.com/community/mac_os

  • I have a macbook air and  and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

    I have a macbook air and  and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

    I have a macbook air and  and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

  • Is this possible and the best way to approach this?

    hello all, back again with more questions
    What I would like to do is load an external swf (preloader) into a container swf, when the preloader swf is loaded, run code from the preloader's document class that will check to see if the container swf is fully loaded.  Once the container swf is fully loaded, load in another swf and unload the preloader swf.
    I would like to keep all code in external classes and off timelines while creating a situation where I can load this preloader swf into any parent swf and do that check.  is this possible and the best way to approach this?
    any advice/help would be great.

    Why not just do it the more straightforward/normal way and use the preloader to load your other files? The preloader would load the 'container' you have now, and when it's done load the other swf you mentioned.

  • 8 is rejecting my key code.  Support indicates it is a valid code and I need to reinstall.  I did and it is still rejecting.  What should I do next.

    Thank you for considering my question.  That is very generous.
    8 is rejecting my key code.  Support indicates it is a valid code and I need to re install.  I did and it is still rejecting.  What should I do next.

    Acrobat 8 ?
    Standard (sn:1016...) or Pro (sn:1118...) ?
    Do you install from CD/DVD or download?
    If it's a download, what's the size of the install file and where did you download it?
    Is it a full version or an upgrade?
    What's the operation System (Win, Mac) ?

  • It won't let me play videos in full sceen mode when I try to, and the full screen option is greyed out. So how do I fix it?

    How do I get it to let it to let me play videos in full screen when there is no option for this by the controls in the little box, the one to maximize won't work, and the full screen option is greyed out in prefernces?

    I had the same issue and have now solved it.
    Here is how: https://discussions.apple.com/thread/2633729?start=229&tstart=0
    Hope this helps,
    Jérôme.

  • I am actually using a free trial of photoshop cc and the contact sheet option does not work-?

    i am actually using a free trial of photoshop cc and the contact sheet option does not work...

    Hi dmomoney24  ,
    Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
    Please revert if the problem persists.
    Thanks,
    Atul Saini

  • HT2534 Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

    Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

    Try this support page provided by Apple...
    http://support.apple.com/kb/ht2534

Maybe you are looking for