I lost my game the tribez after loading iOS6. it said it is unable to complete puchase. the game is free. what happened?

i lost my game the tribez after loading iOS6. i am getting a message saying it cannot complete the purchase. the game is free. i deleted it and tried it several times with the same message. what am i doing wrong?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Similar Messages

How to know the size of the EEPROM after loading any Applet

How can I know the size of the EEPROM after loading any applet..
Any comments on this is appreciated
Thank you in advance

kishansaralaya wrote:
Thanks for your suggestion.
But when I try to use
short memRemaining = JCSystem.getAvailableMemory(JCSystem.MEMORY_TYPE_PERSISTENT);
it always shows 32767. Even after loading some applet.
And I am using 72K Java card then how it can show only 32Kbyte as the remaining memory value.This is because a short isn't big enough to display a number above 32767. One way around this is to use a byte[] to fill up some of the space with your temporary applet.
byte[] memoryFiller = new byte[32767];
short memRemaining = JCSystem.getAvailableMemory(JCSystem.MEMORY_TYPE_PERSISTENT);The value of memRemaining + 32767 is the amount of persistent memory left on the card. If memRemaining is still 32767, you can add another byte[] starting with small values and increase the size until you get a meaning ful result (less than 32K).

HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers. We can still surf the web when it goes down.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

TS4148 i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please he

i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me

That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards.

My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect. It never worked after that.

My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect but showed the battery getting charged. Sometime later it said OK TO DISCONNECT. It never worked after that. Please help /guide to restore...

Hello Harrywahi,
Sorry to hear about the trouble you are having with your unresponsive iPod classic. I found a resource that I think would help in a situation like this.
I recommend following the steps in this troubleshooting assistant:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings?

When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings? What have I set in settings that is stopping my upgrade??

Sorry, good network connection, happily downloaded for 15 minutes before this popup appeared... Staying with iOS 5.1.1 for now hoping Apple can sort it..oO

Can't delete apps from iPad after loading ios6

Icons will vibrate but no x appears. ITunes is missing. Crazy, I know.

That did it. Strange though that those would both get set to off after loading ios6. Thanks.

Podcasts for iPad4: the list of titles is shown with 'monday' or 'tuesday' instead of the date after installing podcasts 2.1. How can I switch to the date?.

Podcasts for iPad4: the list of titles is shown with 'monday' or 'tuesday' instead of the date after installing podcasts 2.1. How can I switch to the date?.

You can't switch that display format.

My wife has an NOKIA E71 and she syncs with iSync. Everything works well, but when she adds a meeting on her phone, it does appear on the computer after syncing. Anyone? We have an iMac 24" with the latest MAC OS.

My wife has an NOKIA E71 and she syncs with iSync. Everything works well, but when she adds a meeting on her phone, it does appear on the computer after syncing. Anyone?
We have an iMac 24" with the latest MAC OS.

Hello Kerrigaj,
After a re-install of OS X 10.5.8 uninstalled the E71 in iSync and moved it out of the bluetooth-device list first and completely re-installed it using the bluetooth manager (SystemPreferences/Hardware).
No extra thirdparty-software involved and ever since no problems.
Goodluck - hope it works for you.
(MDD 1Ghz DP/2Ghz/OS X 10.5.8 + E71)
Message Edited by nicle on 28-Aug-2009 07:23 PM
Message Edited by nicle on 28-Aug-2009 07:24 PM

HT5192 After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?

After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?

I just updated--my Camera is a disaster. Yes, I know how to turn (and position) the Camera now. However, every photo I take is UPSIDE DOWN in the Camera Roll OR Photo Stream. Even worse, a number of my Apps (Weather Underground, for example) are ALSO now upside down. Has anyone here experienced these serious orientation problems after this update? I've read the 'Manual' and its as if it doesn't exist. However, if I leave the Apple site, customer complaints about orientation abound...
This is my first time posting here about an issue (well, the same issue - I posted last week about the Camera, and no one responded). Any advice at all about how to get this corrected is much appreciated!
Thank you!
Lisa

When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying, "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me). I completely uninstalled the previous iTunes prior to this.

When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying, "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me). I completely uninstalled the previous iTunes prior to this. Any thoughts?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

After downloading Namoroka 64 bit for windows 7 all my search engines are gone. What happened and how do I get them back?

After downloading Namoroka 64 bit for windows 7 all my search engines are gone. What happened and how do I get them back?
== This happened ==
Every time Firefox opened
== This week ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; FunWebProducts; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.6)

Do they appear if you start Firefox in Safe Mode? See [[Safe Mode]]

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

I lost my game the tribez after loading iOS6. it said it is unable to complete puchase. the game is free. what happened?

Similar Messages

Maybe you are looking for