I lost my internet for four days and now my extreme will not do anything
After losing my internet connection for four days when it returned my airport extreme will not do anything. I tried resets and still nothing?
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.
Similar Messages
-
I bought the app Atari greatest hits package for $9.99 and now the app will not even open... Every time I try to open it it closes on its own...any suggestions?
Try deleting it and reinstalling it.
you can also try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds or so until it reboots and see if that helps. -
I was with the computer in a place without internett and then I went on the internett (mistake, i do it because its like a impuls to press the internett butten), and then when I came home fast dial was like '' this is embarrassing. We cant open up the tabs you have been using before you lost the internett'' or something like that, and that have happened before, but then i clicked the go back to fast dial, but this time I did not do that. How can I get back fast dial?
After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed. -
I have an iphone 4s. A while ago it started having issues with bluetooth. All of the sudden, an audio headset I am using quits working with my iphone bluetooth. I check and my iphone doesn't see any of my bluetooth devices. I have an apple keyboard, a headset, and a speaker. Nothing shows up on my iphone but they all connect perfectly to my ipad. Then a day or so later it works again. The are all suddenly there. I just installed iOS7 and I'm still having the same problem. What is UP? Anyone have a clue what is going on?
I have this problem too. I have an iPhone 4, and this wasn't a problem when I bought the phone back in December. I think it came a month or so later and I suspect with a standard upgrade of something like itunes, or iphone software... but I can't pinpoint it to any specific update as it took me a while to notice it. For me, it does this with my work calendar which is run through Microsoft Outlook. But it's the exact same thing - and it means my calendar isn't reliable anymore.
I've made sure the time-zone settings are correct, I've updated all software, and gone through all possible settings for both my i-phone and Outlook. Nothing fixes the problem, even our tech guy at work didn't know what to do. I know it's not just my phone as the exact same thing has happened with my boss's iPhone which is an iPhone 3G, and it frustrates him to no end.
I'm really hoping someone at apple can tell us what's going on, especially since it never used to do this and there doesn't seem to be any way to fix it. If someone thinks they know what itunes update this was due to, let me know - I'll see if I can go back to that older version. -
I restarted my iPhone and now my phone will not do anything.
I restarted my iPhone earlier and it will turn on, but once it gets to my lock screen it freezes and I can not get into my phone. What do I do? Will my phone work?
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
I didn't charge my iphone 5 s for two days and now my iphone doesn't charge how can i fix it
i didn't charge my iphone 5 s for two days and now my iphone doesn't charge how can i fix it
Plug it into a wall outlet, & while plugged in, reset it: Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.
-
Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again. I'm in the middle of a project that needs to go live tomorrow. HELP!!! Please.
Photoshop requires 512 Meg of VRAM or more to use the 3D features - that's been the same for version 14 (CC) and now 15 (CC 2014). Check Help->System Info to see how much your card says it has.
-
The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667
http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e
-
i downloaded lightroom mobile...used it for a day and now i can not see any photos... and there is a message that trial days are 0 but i have a paid creative cloud sub
Click the arrow in the Identity Plate and be sure that you are signed in. If you are try going to Help and register.
-
Submitted my I phone for replacement on 24 April, customer care had predicted delivery in 5-6 days and now today they say not before 6 May! What do I do? I need the phone before 4 May as I am goin out of stattion
All you can do is call the support center and discuss the problem with them. There may be no way they can expedite the replacement, but you can ask.
Regards. -
HT4623 after I update my iphone 4s with ios6 it worked ok for one day and now it is not turning on
after I update my iphone 4s with ios6 it worked ok for one day and now it is not turning on
Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears. No data will be affected.
-
My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.
It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam -
Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.
Pablos1966 wrote:
Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
Why don't you have the original Apple ID? Where did you get the phone? -
My daughter has an iphone 3gs and it required an update. So i connected the iphone to itunes for the update and the iphone locked up . I had to reset the iphone back to factory settings and now the iphone will not activate , Please advise what i can do to get this working for her ?
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I recently changed my wifi password at home and now my iphone will not connect. It will not ask me for a password just says will not connect to network. Advice on how to get iphone to ask network password for wifi?
First, try tapping on the network in the Wi-Fi settings and then tap "forget this network". Then reselect the network in the main Wi-Fi settings screen and see if will then ask for a password. If not, try resetting the Network Settings in the General -> Reset section and then reconnecting to your W-iFi.
Hope this helps.
Maybe you are looking for
-
Hello friends, I have interview in two days , now i have to face client interview through webcam and one with face to face, im very much tensed up and please guide me wht to study and which is most important ones in FI side, waiitng for you reply..im
-
My Computer crashes (blue screen of death) each time I open adobe acrobat 9 pro
I sent the dump file to my IT person and below is response: Both of your crash dump listings list the fault of your crashes as FNPLicensingService.exe This is normally installed as part of an Adobe product (Reader,Photoshop,etc.) but it could also b
-
Alternatives to waiting for Future.get()?
Hi, I'm new to the Java5 and 6 concurrency classes. But so far they seem very cool. My goal is to bulk load data concurrently by using multiple threads. A FixedThreadPool seems like it will do the job just fine. My question has to do with retrieving
-
LAP 1142N "Radio disabled due to PoE" after upgrade to 7.6.120
Recently, we upgraded our 5508 wireless controllers from 7.4.110.0 to 7.6.120.0. One AP (AIR-LAP1142N-E-K9) doesn't work now. Both radios are stuck in state 'reset': AP#sh int dot11Radio 0 | inc Dot11Radio0 Dot11Radio0 is reset, line protocol is down
-
How to update TASK_hyperlink_address field with PSI?
Simple question but hard to do. Can we have custom fields with html hyperlink? And why having fields read only ????