I lost my phone and cant locate it
HELP!!!
Did you have the free "Find my iPhone" service setup on it? Have you tried using it at http://me.com/find/ ?
If not, you won't be able to locate it except by physically looking in the places you may have lost it.
Similar Messages
-
I lost my phone and the location service is off. Is it possible to turn it on from another device?
I lost my phone and the location service is off. Is it possible to turn it on from another device?
No.
-
I lost my phone and used the iphone locater to find it. Now that it has been returned to me, it is disabled and says connect to ITUNES. Can you help me ?
Does the link below help?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
I have lost my passcode and cant sync my iphone either
PlEaSe HeLp I have lost my passcode and cant sync my my phone either so i cant access anything to change it.
Hi,
I'm not sure if that would work, but just give it a shot.
Don't only hold the home button and the wake/sleep button down till it resets,
try holding it down for about 30-40 seconds.
This time it should not just reset. You just have to make sure it's long enough. You will see ;-)
But then, you will have to put everything back on it again.
Better than having no access, I guess ;-) -
i lost my phone and it is switched off now...how can i find my phone with find my iphone app active thru icloud?? pls help me.
Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely. -
I lost my phone and I don´t have the app find my iphone
I lost my phone and I don´t have the app find my iphone
You don't need the App but you must have turned on "Find My iPhone" in Settings > iCloud.
If you have "Find My iPhone" enabled then you may be able to locate it. If not, you cannot locate it. If it was enabled then you can try locating it via http://icloud.com on a computer or the App "Find My iPhone" on another iDevice. Note: this will only work if your device is connected to a network and the device hasn't already been restored as new and/or "Find My iPhone" has not been disabled on it. Note: Disabling "Find My iPhone" is much more difficult in iOS 7.
If you think that your device was stolen rather than lost then you should report it to the police. In either case you should contact your carrier, change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc. -
I have lost my phone and have no backup, how can I get my pictures back?
I have lost my phone and have no backup. How can I get my pictures back?
Without a backup, you cannot recover data. This is a basic tenet of data.
Did you perhaps have iCloud Photostream enabled? -
i lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!
Please please help me, if you know how.
-
I have the find my iphone app and I lost my phone and want to use it but how?
I have the find my iphone app and currently lost my phone and I am at work and would like to use the app now, but how?
brandt_2009 wrote:
I think I still have like 4.2.2 features, but I know I downloaded it to my phone I'm at work but now I don't know how to make the app work from my work computer. Is the iCloud account like the apple or iTunes account?
iCloud is Apple's new online service, replacing mobileme - http://www.apple.com/icloud/. The web account page is https://www.icloud.com/
Find my iPhone is a feature of iCloud - http://www.apple.com/icloud/features/find-my.html
And again, the downloadable app has nothing to do with making your iPhone discoverable by find my iphone. The app is used by a device to find another device which has had the trackable feature enabled in its iCloud account settings. Simply having the app on a device does NOT make that device trackable. In order to be able to find a device, you need to have an iCloud account on that device, and you need to enable the find-my-iPhone setting under that account - nothing to do with the app at all. -
I put a security code on my phone and cant remember what it is. how do i get my phone working?
I put a security code on my phone and cant remember what it is. How do I fix that problem?
You restore the phone using iTunes. If the code was set after the last time you synced or you do not have access to the computer the phone is synced with, google 'iPhone recovery mode'. You will have to place the phone into recovery mode to restore it.
-
IOS7 installed on itunes but it did not install on phone and cant use phone
IOS7 installed on itunes but it did not install on phone and cant use phone any help?
yes i put the wifi adress in and the phone asks to restore from icloud or itunes, i click itunes and it shows that it is connected to itunes. my itunes says it is restored but my phone is stuck on the connected to itunes screen and will not let me into my phone
-
I lost my phone and 8 hours ago got an email that my apple id password was reset....
And that find my phone has been disabled. Is it possible to track from where did this person disabled and restored my apple id?
And is it possible to put that phone on lost mode? please i need to know..... thank youI didnt have a passcode and nobody new my apple id, but my email was signed on that phone. (guess that person just reset my apple id password)
-
I lost my phone, and find my device app wont show its offline, does this mean my phone got restore?
I lost my phone, and find my device app wont show its offline, does this mean my phone got restored
It might have been restored, turned off, or just not have a data connection to the internet (such as by removing the sim card and turning off wifi). If it appears on the devices list in Find My iPhone, you can issue a Lost Mode command, which will lock it with a passcode and display a message of your choosing if and when it goes back online (see http://help.apple.com/icloud/#/mmfc0f0165).
-
HT4061 how can i get my IMEI if i lost my phone and i dont have the phone box
Please help get my IMEI i really need it i lost my phone and the police need my IMEI to trace it , i dont have my phone box where i can see my IMEI PLEASE HELP ME
Thank YouIf it was ever backed up in iTunes on the PC then do this:
Start iTunes
Click on Edit, Preferences, Devices and hover the mouse over your device name. It will show serial number and IMEI. -
Hi I just changed from cs3 to photoshop cc and cant locate the tools bar usually at the top? Need to use the ruler tool?
What operating system are you using?
You don't see the tool options bar (Window>Options) or your looking for the Analysis Menu which is now under Image>Analysis?
You can also get select the ruler tool from the toolbox
Maybe you are looking for
-
6i Reports doesn't work in 9IDS through web.
when I generate the report(which I built directly in 9IDS) through web it is working fine and also I can see contents in .html,.jsp and .gif (web source) files. But if I try to run the report which I have built in Reports 6i, I am getting blank page(
-
How to Rename Oracle 11g Database in the Linux
I want to Rename Database.How I must do this problem.Please help me Edited by: 850512 on Apr 7, 2011 1:18 AM Edited by: 850512 on Apr 7, 2011 1:22 AM
-
When I open Firefox, it is set to load my homepage at MSN. I keep getting a dialogue box that says,"Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third par
-
OMBPLUS: retrieve type of operator?
Hello, i have to determine via ombplus, if an operator is a table, aggregator, filter and so on. For this, I'm looking for the key of that property. "OPERATOR_TYPE" is not the correct key and I don't know how to get a list of possible keys. OMBRETRIE
-
Changing Master Filename, v1.5
Is the new option to change the master filename only available on import? I can't seem to find a command to do it once images are within Aperture (library or referenced). I usually import images from an assignment. Edit them and then batch rename so