I lost my restrictions code can i get a new one for my ipod??, i lost my restrictions code can i get a new one for my ipod??
my ipod touch didnt come with a code
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.
Similar Messages
-
Can i get the imei number through icloud if i lost my phone
can i get the imei number through icloud if i lost my phone
Hi Snowflake10456,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues accessing iCloud because you have set up two-step verification and you no longer have access to your trusted device, you may find the following article helpful:
Frequently asked questions about two-step verification for Apple ID - Apple Support
On the other hand, if you are in the process of trying to set up iCloud Keychain and are not receiving the verification code, you may find this article more useful:
Get help using iCloud Keychain - Apple Support
Regards,
- Brenden -
Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.
You can't view your back up files at icloud.com.
You can't view your camera roll and you can't view your Photo Stream files at icloud.com.
The icloud back up plan allows you to "restore" your iOS device from the files you backed up at icloud.com. -
I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.
You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.
-
I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?
You're not obligated to insert a gift code. But you can purchase gift codes on the Apple online store (gift cards or certificates) or Apple Retail store
Gift codes are pre paid cards so you can use credit on the iTunes Store to purchase content
To create apple ID without payment method:
http://support.apple.com/kb/HT2534?viewlocale=pt_PT -
The two DAQ cards are NI PCI-6070E & NI PCI-6052E. The Labview I'm using is labview 7 Express and the Window system is Window XP. I'm using NI SCXI-1000 chasis and SCXI-1102 & 1102B two modules plus a feedthrough SCXI-1180. 1102 is connected through SCXI-1349 cable to DAQ card 6052E while 1102B is connected through SCXI-1349 cable to DAQ card 6070E. SCXI-1180 is connected to 6070E through SCXI-1349 adaptor on the back of 1102B.
Sarah, thank you for replying my question. It seems that I'm making progress everyday (smile). I'm able to run the test using both daq cards in my code now. But as I'm moving forward, I'm getting new questions too. How do I use one STOP button to control both tasks and how can I save data into one single file?
I attached my code here hoping you can get the specifics on my application by looking at the code. Thanks very much!
Thanks.
Attachments:
DAQmx_Task_Example_plus_voltage_2.vi 416 KB -
I recently reset my computer to factory settings. I re-downloaded iTunes, but lost most of my music and all of my playlists in both iTunes and my 4S. How can I get this back?
Restore your media from the backup of the computer created prior to restoring the computer.
You did create a backup, correct? Not doing so would be extremely unintelligent.
iOS devices are NOT backup devices. -
Switched from ipod to ipod touch. When trying to sync, songs get lost. Songs show in the library and playlist but get a message that says songs cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?
The ! Next to a song:
The song can’t be located; it may have been moved or deleted
To find them try:
iTunes: Finding lost media and downloads
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I lost my iPhone 4 in Brussels last week. It was in airplane mode when lost. I also had a code to unlock the phone. The phone was off when lost. My question is: Can a person access my personal data on the phone? Can they take the chip out and place it into another iPhone and access the personal info on the chip or is the personal data on the phone itself and could they put a new chip in and access the data?
I have Find my iPhone App, but it says that it is offine.
I've checked all week and it is offline.
I clicked on erase iphone when phone accesses the internet on the Find my iPhone App.
I just want to know how safe is my personal information that I have on that iPhone? -
My 1st ipod was lost. My library is on a Dell with Windows. I registered my new ipod to a Mac. How can I get my library from Windows onto my new Ipod?
Thank you for your help. I am still having trouble. As you can tell, I am not technologically advanced AT ALL. My music is all showing up in the library but when I go to file in the top left corner, Sync is greyed out and I cannot select it. I'm gonna continue to try this. It's been a long time since I had my 1st ipod and things have changed so much I will probably need to research this stuff. Thanks again for your help.
-
I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa
James,
I cannot get into Settings! It keeps reading out Slide to Unlock when I try to slide teh arrow to open the fpur digit entry boxes. -
Lost all my phone numbers in my iphone 4 and my iclod account was without any numbers. how can i get my contacts back?
If they were on your phone when you last backed up you could try restoring to your backup. This may restore them if you follow this user tip: https://discussions.apple.com/docs/DOC-4841.
-
I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can’t be burned because an unexpected error occurred (error code 0x80020000)
I did burn the same way in MAC OS X 10.6.8. with no troubles!
Can anyone please help me out?
I use for years DVD-R of TDK 4.7GB 16X.Hey topo27,
I would try out the following and see if it helps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Welcome to Apple Support Communities!
Cheers,
Delgadoh -
i lost my ipod and i remotely locked my ipod on the computer using icloud, but when click on find my ipod it says NO DEVICES, how can i get back to the find my ipod page??? pliz help
The only way you will be able to track that iPod is if it is turned on and connected to a wifi network by the person that has it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I got a new macbook pro but i have lost some music, tv shows and films. How can i get them back?
Click here and follow the instructions, or move them from the old computer. Any movies you've previously rented aren't transferable.
(79638)
Maybe you are looking for
-
Problem in the jvm running in OS2 operating system
Friends, It's a very urgent need for me. Please help me to solve this problem. I have a client server architecture based on RMI. The server runs in windows(jdk 1.4.2) and the client runs in OS2 (jdk 1.1.8). (we have no other choice but to use this jv
-
How should I upload a LR Web Gallery to my dot mac account
I want to create some galleries in my Iweb site using Light room. what should I fill in to the drop down box for the hosting site url. I ultimately want to call in the galleries from a Freeway 5 Pro generated site that will be the visitor interface.
-
Wldeploy Ant task deploys app in 'New' state
I am trying to deploy a web application in WL 10.0 using the wldeploy Ant task. However, everytime the application is deployed, the consolidated state is 'New' (or deferred deployment). I have to bounce the servers everytime to bring the app in the A
-
Cannot switch between WPA2 and WPA Enterprise WiFi locations.
Hello Everyone, I have two Wifi locations I use, a WPA2 and a WPA Enterprise. When I switch locations from one to the other it looks as if that the Airport express resets but does not let go of the active location. I have to manually turn airport off
-
How do I turn off reminders in one MS Outlook Calendar, but not the other?
I have my calendar and I also have a calendar (lets call it Shared Calendar) in which I copied all of my team's calendars into. I want to keep the Reminder alert on my calendar and turn off the Reminder alerts on the Shared Calendar. How can I do th