I lost one of my "work area" markers
Hello,
I somehow lost one of my work area markers. How do I get it back onto the timeline ?
On this subject, I always find it awkward when I try to drag the left marker to the left side of my work area footage on the timeline, is there not an easier way to do this, than grabbing at it with the mouse ?
I will first define my "in" and "out" points on the timeline.
Then I drag the 2 markers to define that area, and they will snap nicely to where I have put the "in" and "Out" markers, however grabbing that left "work area" marker just isn't easy to do, and now, one of them is missing.
I'm sure the missing marker is there, I just can't find it.
Thank you for any information.
Dave.
Hello Steven
Thank you for the information. I looked into the keyboard shortcuts, and that did the trick ! , the elusive left marker has re-appeared. I wonder where it was, perhaps somewhere on the timeline where I didn't see it.
I think I shall start using more of the keyboard shortcuts, some of these look like they can save a lot of time.
Thanks Steven,
Dave.
Similar Messages
-
Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
Come on Apple.....get this issue sorted out!Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.
-
I cannot locate my cs6 redemption code and I just purchased a new computer because my old one doesn't work anymore. How can I get my photoshop on this computer? All my other products are registerd with a serial number
The activation servers for CS and CS2 stopped working and were taken down. You'll need to take a look at this link for your issue: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Benjamin -
Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back. Please HELP me.
Well, iCloud has nothing to do with this.
Do you have the built-in backup function Time Machine running on your Mac?
See: http://support.apple.com/kb/ht1427 -
CS6: exporting "range of time markers" without setting in-/out point or defining working area?
Hi,
in CS6 I defined several "range of time markers" to get a better overview of my project. Now I want to export each range as a single video.
The only way to do this is creating in-/out points or setting the working area (what is the English translation for "Arbeitsbereichsleiste" (German)...?)?
Or is it possible to define this selections via the previous created range of time markers? That would be the easiest way...
Thanks, CarlosFor exporting chunks of the Timeline, I set a Work Area and then export. If you want to export between markers, that would be a feature request: http://www.adobe.com/go/wish
-
i have two iphones , i lost one and entered to find my iphone and as mistake i block both and delate all the data of both. how can i get it on, im trying to restore it , but its not working ...
Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik -
It appears that only one of my fans are working on my macbook pro with retina display 13 inch late 2013 model. Is some thing wrong? if so how can i fix it?
To my knowledge there is only one fan on all 13" Mac notebooks, Retina or standard screen. Not enough space for a second fan and no Discrete GPU to cool.
So nothing is wrong. -
I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?
I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm. -
No audio coming from my iMac...one moment it worked then nothing from no app and yes the volume is up and no, there are no headphones
Greetings sailpeachie,
After reviewing your post, I have located an article that can help with audio issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Troubleshooting issues with no audio from built-in speakers on Macs - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
BobbyD -
More then one photo open in the work area
I Photoshop and earlier Elements I could place as many photos in the work space. I use this to move layers from one to the other. You could hold the shift key and drag from one photo to the other. Can't find the setting that allows this. I can only have one photo open the work area and all others are sitting in the ben at the bottom.
You don't state which version of Elements in use. I have PSEv.8.
In full Editor, go to Edit>Preferences>General and tick "Allow Floating Documents in full edit mode".
The arrange icon at the top provides for "Float all in Windows". -
Itunes has lost my purchase song list but all the albums are list as complete my albums. The ones i have purchased are tell me i have to buy them again. Not happy Itunes not Happy Apple.
How do i fix it or does apple have to fix it on there end?If the single songs are no longer available in Itunes, that would also explain why you aren't able to see your purchases.
If the songs are on your phone you can transfer purchases to iTunes app on your computer. You wouldn't be able to download them again though. -
Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best -
Accidentally hit the 'trim comp to work area'. Now I can't get my files back into comp timeline.
I'm using After Effects CC on my macpro. When going to add a shot to the render queue, I accidentally hit the 'trim comp to work area' and didn't notice what had happened until I went to go back to work on other shots. I tried to hit Control Z but it was too late it seemed and it wouldn't go back to how it was. i tried resetting the length of the comp and putting the files back, but no use. Tried making a new comp and copy and pasting all the files in the side panel of my orig comp, but nothing. Tried re-adding the same file from the project window and copying and pasting the effects keyframes from the orig shot to the new one but they didn't line up properly.
I still have all the files in the comp side panel but can't seem to get them back into the now extended timeline. I still have all the effects I've been doing for the past 3 weeks, but can't do anything to get them into a position where I can continue to manipulate them.
I've searched a bunch of forums and can't find this problem anywhere.
Have I lost all my work? Please help.It appears that you've pushed those layers into negative time, which you can't view in the Timeline. To get the layers back into the Timeline view, you'll need to move the layers in time with keyboard shortcuts. I assume that you've got your layers arranged in an edit, and you want to preserve their relationships, so do the following:
Select all of the layers.
Hold down Alt/Option+Shift and press Page Down until the layers are visible. This shortcut moves layers 10 frames later in time. Removing Shift moves them 1 frame at a time. Using Page Up instead of Page Down will move them earlier in time.
Another useful pair of shortcuts is [ and ], which set the in or out points of the select layer(s) to the current time. But you probably don't want to use those shortcuts in this case because you'll lose the time relationships of your edit. -
Hi folks, how do I restore the default work area bar in PE10 so that the work area corresponds with the full length of all clips in the timeline? I accidentally shortened the work area, have searched help and googled but have not been able to restore the default. Regards, Phil
Bill,
I could not agree more. Once, that knurled "box" was actually a BOX, and easy to spot. In the continued "streamlining" of the GUI, I feel that the designers are making too much, too difficult to see. I am becoming less, and less inclined to like the GUI. Maybe I am just used to having everything clearly deliniated, right in front of me (streamlined, or not), and now I have to really hunt all over, to do what I am used to doing. Maybe for a brand new user, with Steve's book at hand, it is more intuitive, but as a Premiere user for many years, I am often lost, and have to search. I also feel that many operations are not in logical locations - I am still a bit miffed that the output functions were moved from the Export menu, to Share, which is now Publish+Share.
Years ago, Kai Krause left the Adobe Photoshop team, and formed his own company. His first product was Kai's Power Tools, which was a very useful set of Filters, that were not then included in Photoshop. Everyone rushed to add that as a plug-in, and I found it very useful. He followed Power Tools with Convolver, with even more Filters. However, his team designed a totally new interface. Almost every pixel in that interface did something. There were few noticable "buttons," and one had to randomly click all over the interface, then things would happen to the image. However, as one never knew WHAT was chosen, it was totally impossible to repeat, say with some attribute change. Critics praised that innovative interface, but commercial users shunned it, like a very bad plague. If they found a combo of pixel pushes, that did something they liked, but wanted to repeat that, with a change, or two, or make a simple adjustment to suit a client, it was impossible. One had to start over, begin clicking on, or click-dragging on random pixels, hoping to get back to something close to what they had. Because nearly every pixel was active, who knew what they had done previously? The GUI won many design awards, but it failed in the marketplace, which was about 99% commercial back in those days. It also haunted Kai Krause, when he released more traditional plug-ins, as most users still remembered Convolver. It was more of a video game, based on an Imported image, than a useful tool.
The software reviewers seem to love the more streamlined GUI's, but then they only use the program, perhaps once, or twice, to write their articles. They get caught up in the "look," and miss having to actually use the program.
Hunt -
Why can't I export ONLY my work area in CS5???!!!! Help!
i have a lenghty project with multiple 2 minute clips on the timeline. i need to export each short clip seperately. thought putting them on one timeline would be faster, but my CS5 keeps trying the export the whole project, even though i have clearly marked the work area with the little markers (arrows) and selected "work area only" on the encoder screen. help!!!
They're handles, rather than arrows. And the selected work area should be reflected in the AME window...
Maybe you are looking for
-
How can I update my old flows, when I update the flowchart
I updated my flowchart and my old flows was not updated but I need to update the old Itemkeys, how can I do it. Thanks Paulo H.
-
HT4059 How do I close a book to look at a different one?
When I open iBooks the page I am reading fills the whole screen, so I have no icons to control the app - all I can do is page backward or forward through the book that happens to be open. Surely not right?
-
Can no longer delete files in iTunes!
I'm converting lots of albums in iTunes from mp3 to Apple lossless, then deleting the mp3 files. For no obvious reason, I've suddenly lost the ability to delete in iTunes. I've come out and gone back in, restarted - no effect. I've been logged on as
-
hi, iam developing a program in which iam using a z-table. iam using the bapi for production order cancel and create goods movement.... after running those bapis i have to update few fields in z-table ie...cancel conf counter, mat doc number to the
-
How to use local variables to pass an image mask correctly
I'm kind of new to labview but i'll try to explain the problem as best as i can: I'm trying to pass an image mask (basically an image) to the next iteration of a while loop using local variables. I think the image passes through the loop with the loc